Datapath iolite 600 User manual

Thank you for purchasing the Datapath iolite 600 wall controller. The
aim of this document is to quickly guide you through the process of
initial setup. For detailed instructions consult the system User Guide
which can be found on the Recovery Media.
Quick Start Guide
www.datapath.co.uk | [email protected] | [phone]
600

STEP 1 CONTENTS
IOLITE 600 QUICK START GUIDE
iolite 600 system
Mouse/keyboard
Recovery Media
Cables/Adapters
Accessories Pack

Build Log
MAC Address labels
Each Datapath iolite 600 is custom built and therefore the number and type of input


details on how the cards are installed and any accessories which may accompany
them.
Page 2

Connect Keyboard and Mouse to USB Ports.
STEP 2 KEYBOARD AND MOUSE
STEP 3 CONNECT TO A NETWORK (OPTIONAL)
Page 3

STEP 4 CONNECT INPUT SOURCES

system to system. Contained within the documentation pack is a Build Log detailing
the PCIe cards installed and where they are located on the backplane. The enclosed

Input Connectors
The I/O panel on your system may dier from the above illustration depending on
which motherboard option has been supplied. Refer to the motherboard
documentation for detailed information.
Page 4

STEP 5 CONNECTING CONTROL SCREEN AND
MONITORS

Graphics Device) prior to leaving the factory. If required, connect the control screen
to the motherboard as shown above. If a control screen is not required, the BIOS
settings will require changing. See the motherboard User Manual in your accessories
pack for instructions on how to disable the internal graphics device.
1
4
Monitor 2
Monitor 3
Monitor 4
Monitor 5
Monitor 7
Monitor 6
Monitor 8
Monitor 1
Connect graphic outputs to
monitors using DisplayPort cables.
(Not supplied)
Control Screen
(Optional)
4 x 2 Video Wall
13 4
5678
2
Page 5

STEP 6 POWERING UP THE SYSTEM
Connect power cables then plug into a mains supply.
Switch on the system.
2
1
2
1
Page 6

STEP 7 WINDOWS 7 SETUP
The Product key is located
behind the front panel. Gently
pull away the panel for access.
Page 7


screen resolution. You can change these settings if required using the TWIN tab:
Start | Control Panel | Appearance and Personalization | Adjust screen
resolution.
STEP 9 DISPLAY SETUP
Start | Computer | System Properties | Activate Windows now.
Select the appropriate method available.
To view the Product Key, remove the front panel. The Product Key label is
displayed on the front of the system.
STEP 8 ACTIVATE WINDOWS 7
Computer Name:
It is recommended that only Internet-standard characters are used in the computer
name. The standard characters are the numbers 0 through to 9, upper and
lower-case letters from A through to Z and the hyphen character. Computer names
can’t consist entirely of numbers nor can they contain spaces. The name also can’t
contain special characters such as: < > ; : “ ?* + = \ | ? ,.
Page 8

1
2
3
Page 9

Page 9
Computer Name:
It is recommended that only Internet-standard characters are used in the computer
name. The standard characters are the numbers 0 through to 9, upper and
lower-case letters from A through to Z and the hyphen character. Computer names
cannot consist entirely of numbers, contain spaces or use special characters such as:
< > ; : “ ?* + = \ | ? ,.
There is no requirement for users to activate Windows 10, activation is completed
automatically.
Enter localisation details.
STEP 10 WINDOWS 10 SETUP
Page 10

Start | Control Panel | Display | Change Display Settings

STEP 11 DISPLAY SETTINGS WINDOWS 10



Page 11

STEP 12 WALLCONTROL 10 (OPTIONAL)
Start | All Programs | WallControl 10 - Client

Quick Start Tour of the application. It is strongly recommended that you take the
tour prior to using the application.
The WallControl 10 - Client
1
2
345
1 Indicates the server you are connected too.
2 A representation of the display wall associated with the server.
3 Sources Tab - Displaying all the sources connected to the server for use on
your display wall.
4
5
layouts.
Start | All Programs | WallControl 10 - Server
Before opening the Client interface you will need to start the Server by clicking on
it in the Programs menu. The WallControl 10 Client will only detect servers that are
running.
Page 12

When opened, the display wall tab shows a live representation of the physical wall
and the sources available to display on it. To place a source on the video wall, simply
click on the required source in the sources tab and drag it onto the display wall
representation. (Note: It is not possible to drag Application sources, double click to
open)

be selected, how to use and create templates and how to save, recall and share

Click on the display wall representation to open the display wall tab.
Sources
Display Wall
Tab
Display Wall
Representation
The WallControl 10 - Security Administration Client (Pro Version Only)
The WallControl 10 - Security Administration Client allows Administrators to assign

a role allowing unrestricted access on one wall but assigned a role on another wall
which only allows the opening of pre-determined layouts.

program must be run to enable security protection for the application. To run the
ged into Windows® with Administrator Rights.
Locate and double click on the 
Program Files (x86) \WallControl 10\ Security Server\SecurityOnO
Page 13

Start | All Programs | WallControl 10 - Security Administration Client
A WallControl 10-Pro serial dongle must be inserted into a vacant USB port. If the
dongle is removed or swapped, the Security Administration Client will not open and
an error message is displayed, therefore it is important the dongle is not removed.
The WallControl 10 Security Application 
• Import users from the Windows® Active Directory into the database.
• Create and edit roles.
• 
access to them.
• Assign roles to walls.
Page 14

© Datapath Ltd., England, 2016
Datapath Limited claims copyright on this documentation. No part of this
documentation may be reproduced, released, disclosed, stored in any electronic
format, or used in whole or in part for any purpose other than stated herein without
the express permission of Datapath Limited.

Start Guide is correct, Datapath Limited make no representations or warranties with
respect to the contents thereof, and do not accept liability for any errors or omis-

cannot assume responsibility for the use made of the information supplied. All regis-
tered trademarks used within this documentation are acknowledged by Datapath
Limited.
EU – Class A Declaration of Conformity
Datapath Ltd declares that this product complies with the essential requirements
and other relevant provisions of Directives 2014/30/EU, 2014/35/EU and 2011/65/EU.
A copy of our Declaration of Conformity is available on request.
Datapath Limited
Bemrose House
Bemrose Park
Wayzgoose Drive
Derby, DE21 6XQ
UK

on the Recovery Media supplied with the system.
Page 15

Product iolite 600 Quick Start Guide
 Release
Version Number 2.1.2
Datapath UK and Corporate Headquarters
Bemrose House, Bemrose Park
Wayzgoose Drive
Derby, DE21 6XQ
England
[phone]
[email protected]
Datapath North America
2550 Blvd of the Generals
Suite 320
Norristown, PA 19403
USA
[phone]
[email protected]
Datapath France
[phone]
[email protected]
Datapath Germany
[phone]
[email protected]
Datapath China
[phone]
[email protected]
Datapath Japan
[phone]
[email protected]