Dataserve Infotech 1D miniRighto BT User manual

USER MANUAL
SPECIFICATIONS
Model 1D miniRighto BT
Sensor Type Linear CCD
Ambient Light 0 ~ 110,000 Lux
Power Consumption -
Idle 0.04 W
Power Consumption -
Scanning 0.70 W
Humidity
95% RH non-condensing
at 50 d C
Illumination Red 600- 660 nm
Operating Temp. -20 °C ~ +50° C
Optical resolution ≥5 mil
Scan Rate
(Barcode of 13
characters) HID: 3 /second
Storage Temp. -40°C ~ +70°C
Battery Voltage 3.7V
Battery Capacity 850 mAH
Battery Life
4 hours continuous Scan
& Bluetooth transfers
Dimensions
73mm*44mm*23mm-
13mm
Weight 52 gm
Bluetooth Radio
Class 2 Bluetooth with
EDR support
Bluetooth Range Max 10 meter
Bluetooth Version 2.1
wired connectivity No
MADE IN INDIA

OPERATING PROCEDURE
 Switch ON: Touch the black Button to power miniRighto
ON. Central LED on top of the black touch button will
turn on with a long beep sound.
 Switch OFF: miniRighto if not connect to any host will
turn off automatically if no activity is done for 5 mins.
 Battery Low Indication: When battery is low, BAT LED
starts blinking.
 Battery Charging: When USB cable/USB Charger is
connected to USB port, BAT LED turns ON.
 Scan Barcode: Momentarily Touch the black Button to
scan barcodes. As soon as button is touched, device
emits red beam.
 Bluetooth Connection: miniRighto can get
connected with any PC/Laptop/Mobile that
supports Bluetooth HID (Human Interface
Devices) or SPP (Serial Port Profile).
To pair, go to Bluetooth settings menu of
PC/Laptop/Mobile and turn ON Bluetooth. Search
for devices and pair with ‘mRighto-HID-xxxx’ or
‘mRighto-SPP-xxxx’.In case of SPP device, enter
passkey as ‘12345’ on the host PC/Laptop/Mobile.
 Auto Connection:Righto gets automatically
connected to the already paired PC/Laptop/Mobile.
When miniRighto is connected to a host, the
DATA LED will turn ON.
 HID: miniRighto sends barcode data at the
location of curser in host PC/Laptop/Mobile at a
speed of 20ms/character. Depending upon the
length of barcode, the speed of scanning should
be adjusted.
 SPP: The host device shall require an interface
app such as ‘BluetoothSpp’ to display or store the
barcodes. The Bluetooth connection with paired
miniRighto shall take place
through the software App.
 Switching between HID, SPP: miniRighto has
default factory mode as HID.
User can switch the device across HID and SPP
modes by scanning the below provided barcodes.
After a successful switch, the device will glow all 3
LEDs and sound a long beep before entering into
the newly selected mode.
 Switch off : The device can be switched off by
by scanning below barcode
DS-12-SwitchOff
PRECAUTIONS
 Periodically charge the device while in use and also
when not is use.
 Avoid scratches or dust formation on the scan window.
 miniRighto should be switched off during transportation.
 Do not incinerate(burn) miniRighto or the battery inside.
It may harm the environment or explode. Keep the
device away from extreme heat.
 Do not frequently disconnect the charging connection
from miniRighto as it reduces the battery life of
miniRighto.
WARRANTY
 The warranty period for Dataserve miniRighto
barcode scanner is 12 months. Under the warranty
period any defect in the product will be repaired by
Dataserve Pune at cost. To and fro shipping cost will
be to customers account.
 Warranty period for the USB cable, charger and
internal battery is six months.
 No warranty on the handgloves
 Any physical damage or damage due to intentional
misuse, abuse or subjecting the product to inputs
outside the specifications will not be covered under
the warranty.
 Warranty shall be governed by law of state of India.
Any dispute subject to Pune jurisdiction.
Serial Number --
Invoice Date –
Seller Sign and Stamp --