Datavan Pyramid 150 User manual

Pyramid 150
15” LCD Touch Monitor
User’s Manual
Version 1.2

2
CHAPTER 0 SAFETY INSTRUCTIONS & USER’S NOTICE
Electrical safety
1. To prevent electrical shock hazard, disconnect the power cable from the electrical outlet
before relocating the system.
2. When adding or removing devices to or from the system, please ensure all device power
cords are unplugged before the signal cables are connected.
3. Make sure the voltage of the power source conforms within the permitted range before
connecting the equipment to the power outlet. If you are not sure of the electricity
voltage that you are using, contact your local electricity company.
4. Place the power cord in such a way that it cannot step on. Do not place anything over
the power cord.
5. Always unplug the power cord before inserting any add-on card module.
6. Never pour any liquid into the opening as this could cause damage or electrical shock.
7. If the power supply is broken, do not try to fix it by yourself. Contact a qualified service
technician or your retailer.
Operation safety
1. Before installing any device into the system, carefully read all documents that come with
the package.
2. Keep this User’s Manual for future reference.
3. Keep this equipment away from humidity and dust.
4. Place the equipment on a steady flat surface before setting it up.
5. If any of the following situations arise, have the equipment checked by qualified service
technician:
 The power cord or plug is damaged
 Liquid has penetrated into the equipment
 The equipment has been exposed to moisture
 The equipment is not working well or does not work as described in the
User’s Manual
 The equipment has been dropped and damaged
 The equipment has obvious signs of breakage
6. The openings on the housing are for air ventilation and to protect the equipment from
overheating. DO NOT COVER THESE OPENINGS.
7. DO NOT LEAVE THIS EQUIPMENT IN A NON-AIRCONDITIONED ENVIRONMENT
WHERE THE STORAGE TEMPERATURE MAY GO ABOVE 60ºC (140ºF) AS THIS
CAN DAMAGE THE EQUIPMENT.
8. All cautions and warnings on the equipment should be noted.
CAUTION
 The technical descriptions and specifications of the product are subject to
change without notice.
 For safety reasons, gloves should be worn when assembling the product.
 There is a danger of explosion if the battery is incorrectly replaced. Replace
only with the same or equivalent type of battery recommended by the
manufacturer. Dispose used batteries according to the manufacturer’s
instructions.

3
NOTICES
Federal Communications Commission Statement (FCC Statement)
This device complies with FCC Rules Part 15. Operation is subject to the following two
conditions:
 This device may not cause harmful interference.
 This device must accept any interference received including interference that
may cause undesirable operation.
This equipment has been tested and found to comply within the limits of a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the manufacturer’s instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by switching the equipment on and off, the user is encouraged to try to correct the
interference by one or more of the following measures:
 Reorient or relocate the interference-receiving antenna.
 Increase the distance of separation between the equipment and interference
receiver.
 Connect the equipment to a power outlet on a circuit different from that to which
the interference receiver is connected.
 Consult the dealer or an experienced radio/TV technician for help.
WARNING!!
The use of shielded cables for connection of the monitor to the graphics card is
required to assure compliance with FCC regulations. Changes or modifications to
this unit not expressly approved by the party responsible for compliance could void
the user’s authority to operate this equipment.
Note
Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.

4
USER’S NOTICE
No part of this manual, including the products and software described in it, may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by
any means, except documentation kept by the purchaser for backup purposes, without the express
written permission of the distributor (original supplier).
The distributor (original supplier) provides this manual “AS IT IS” without warranty of any kind,
expressed or implied, including but not limited to the implied warranties or conditions of
merchantability or fitness for a particular purpose. In no event shall the distributor (original supplier),
its directors, officers, employees or agents be liable for any indirect, special, incidental, or
consequential damages (including damages for loss of profits, loss of business, loss of use or data,
interruption of business and the like), even if the distributor (original supplier) has been advised of the
possibility of such damages arising from any defect or error in this manual or product.
Specifications and information contained in this manual are provided for informational use only, and
are subject to change or update at any time without notice, and should not be construed as a
commitment by the distributor (original supplier). The distributor (original supplier) assumes no
responsibility or liability for any errors or inaccuracies that may appear in this manual, including the
products and software described in it.

5
TABLE OF CONTENTS
SAFETY INSTRUCTIONS & USER’S NOTICE
Safety Instruction Page 2
User’s Notice Page 4
Table of Contents Page 5
CHAPTER 1 INTRODUCTION & KEY FEATURES
1.1 Introduction Page 6
1.2 Taking card of your Pyramid LCD Page 6
1.3 Key Features Page 7
CHAPTER 2 SYSTEM CONFIGURATION
2.1 The System Unit Chassis Page 8
2.2 Pyramid 15” LCD Monitor Specifications Page 9
2.3 MSR Installation Page 10
2.4 Customer Display Installation Page 10
2.5 LCD operating angle range Page 11
2.6 LCD Display and Combo Cable Composition Page 12
2.7 OSD Buttons Page 13
2.8 OSD Control Page 14
CHAPTER 3 ADDED FEATURES
3.1 VFD Customer Display Page 15
3.2 Magnetic Strip Reader (MSR) Page 17
3.3 ELO Touch Panel Page 23
3.4 Fujitsu Touch Panel Page 24
3.5 Smart Card Reader Page 25
CHAPTER 4
4.1 Easy failure debug Page 26
4.2 Alarm message Page 26

6
CHAPTER 1 INTRODUCTION & KEY FEATURES
1.1 Introduction
Congratulations on your purchase of the Pyramid Touch LCD Monitor, one of the sturdiest and
most versatile touch-screen displays on the market. The following introduction will help you to
familiarize yourself with your new Pyramid LCD.
1.2 Taking care of your Pyramid LCD
1.2.1 Precautions
 Read all of these instructions and save them for later use.
 Follow all warning and instructions on the product.
◎Product
 Do not cover or block the vent holes in the case.
 Do not insert sharp objects or spill liquid into the LCD monitor through its cabinet slots. This may
cause accidental fire, electric shock or device failure.
 Disconnect the power plug from the AC outlet if you are not using the device for an indefinite
period of time.
 Do not attempt to service this product yourself, as opening or removing covers may expose you
to dangerous voltage levels or other risks.
 Please do not apply pressure on the touch panel using pointed or hard objects.
◎Plugs
 Do not remove any of the prongs of the monitor’s three-pronged power plug.
 Disconnect the power plug from the AC outlet under the following conditions:
 If you will not use the device for an indefinite period of time.
 If the power cord or plug is damaged or frayed.
 If the product does not operate normally when the operating instructions are followed.
Adjusting the controls may result in damage and will often require extensive work by a
qualified technician to restore the product to normal operation.
 If the product has been dropped or the cabinet has been damaged.
 If the product exhibits a distinct change in performance, indicating a need for service.
◎Power and extension cords
 Do not allow anything to rest on the power cord.
 Do not locate this product where persons may walk on the cord.
 Use only the proper power cord with the correct attachment plug type. If the power source is
120V AC, use a power cord that has UL and C-UL approval. If the power source is a 240V AC
supply, use the tandem (T blade) type attachment plug with ground conductor power cord that
meets the respective European country’s safety regulations, such as VDE for Germany.
1.2.2 Cleaning
 Gently wipe screen with a clean camel hair lens brush, or a soft, clean, lint-free cloth.
This removes dust and other articles that can scratch the screen.
 Do not apply pressure to the screen surface when wiping it clean.
 Do not pour or spray any liquid directly onto the screen or LCD monitor casing.
 Chemical cleaners have been reported to damage the screen or the LCD monitor.

7
1.3 Key Features
1.3.1 General Introduction
Your Pyramid LCD is a versatile POS LCD that can be used in the following applications
 This LCD monitor incorporates 15” color active matrix thin-film-transistor (TFT) liquid
crystal (LCD) display to provide superior display performance.
 The high-definition image TFT-LCD display supports resolution up to XVGA 1024 x 768.
 The display is compatible with IBM VGA, VESA, and Macintosh standards.
 Imbedded audio system provides sound performance.
 The TFT-LCD conforms to EPA Energy Star and VESA DPMS (Display Power
Management Signaling) power management standards.
 Complete OSD (on-screen display) function allows for adjustment to optimum images.
 An integrated, robust and splash-proof design ensures the Pyramid LCD can be
operated in any harsh environment.
 A unique mechanical design allows for the easy integration of a touch screen (optional),
an MSR card reader (optional) and a customer display (optional).
 The Pyramid LCD has a modularized system core design, meaning that its operation and
maintenance are easily learned and understood.
 One USB port is available on front side of LCD Panel for easy access.
 Intelligent Combo Cable Management:
 POS Function Combo Cable: DC12V Cable / Touch (RS232) Cable/VGA
Cable/MSR (PS2 Keyboard Wedge) Cable
 Auxiliary Function Combo Cable: Audio Cable/USB Cable/Pole Display (RS232)
Cable
1.3.2 Temperature and Packing
Operating: 0ºC to 50ºC
Storage: -20ºC to 60ºC
Case dimensions: 14" (W) x 8.3" (D) x 13.8" (H) (355 x 210 x 350mm)
Export: Each pack measures 55 x 25 x 40cm and weighs 8.5kg net / 9.5kg gross
1.3.3 Other Features
15” TFT LCD display (digital input) with adjustable hinge and touch panel
15” ELO resistive type 5-wire touch panel or Fujitsu resistive type 4-wire touch (optional)
1.3.4 Options
ISO track 1/2/3 MSR added to LCD display
Smart Card Reader
20 x 2 VFD customer display
All brand names and trademarks are the property of their respective owners.

8
CHAPTER 2 SYSTEM CONFIGURATION
2.1 The System Unit Chassis:
The following information will help you to acquaint yourself with the arrangements of the
Pyramid LCD Monitor.
When you open the box, you will find the items detailed in Figure 2.1 below:
 Pyramid 15” LCD Monitor
 Accessory Package
 AC power Cord
 DC 12V Adapter
 Customer Display (Optional)
 Magnetic Stripe Reader (Optional)
 Magnetic Stripe Reader + Smart Card Reader (Optional)
Figure 2.1 shows the full packing box. In the side compartments of each box you will find the
Monitor, AC power cord, DC 12V adapter, accessory package, VFD customer display
(optional) and magnetic stripe reader (optional) or magnetic stripe reader + smart card reader
(optional).
Customer Display
in Accessory BOX
(Optional)
1. Magnetic Stripe Reader
2. Magnetic Stripe Reader +
Smart Card Reader
(Optional)
Accessory Package
AC Power Cord
DC 12V Adapter Figure 2.1

9
2.2 Pyramid 15” LCD Monitor Specifications
LCD Panel Size: 15-inch TFT Active Matrix Display
Maximal Visual Size: 304 (H) x 228 (V) mm
Pixel Pitch 0.297 (H) x 0.297 (V) mm
Maximal Resolution: 1024 x 768 Pixel
Contrast Ratio: 400:1 (Typical)
Brightness: 250 cd/m2
Response Time: 15 ms (Typical)
Viewing Angle (L/R): + / - 80 degree
Viewing Angle (U/D): + / - 80 degree
Display Color: 16.7million (maximum)
PC Interface: Standard PC R.G.B. Analog Interface
Signal Input Connector: DB Type 15-pin Connector
Signal Sync.: LVDS positive or negative
VGA 640 x 350 (70Hz)
VGA 720 x 400 (70Hz)
VGA 640 x 480 (60/72/75Hz)
SVGA 800 x 600 (56/60/72/75Hz)
Display Mode:
XGA 1024 x 768 (60/70/75Hz)
Power Supply: DC 12V 3A DC Power Adapter
Power Consumption: 25W (maximum)
Sound Function: 1W Speaker x 2 with Amplifier
USB Function: 1 x USB Connector
Case Color: EPSON Dark Gray
Operating Temperature: 0ºC to 50ºC
Operating Humidity: 20% ~ 80%
Storage Temperature: -20ºC to 60ºC
Storage Humidity: 20% ~ 80%
Product Size: 21cm (L) x 35.5cm (W) x 35cm (H) with Base
Product Packing: PE Form x 2 with Carton
Packing Size: 25cm (L) x 55cm (W) x 40cm (H)
Touch Panel (Option): ELO 15” 5-Wire Touch Panel with Controller (RS-232 Interface)
Fujitsu 15” 4-Wire Touch Panel with Controller (RS-232 Interface)
※※
Pixel Faults
When the LCD Panel is manufactured, some pixels may be brighter or darker than others. This
does not affect the overall display quality, nor does it affect the display’s electrical, safety, or
usability features.
Notes: Specifications are subject to change without notice.

10
2.3 MSR Installation
1. Attach the MSR device jack to the MSR socket on the side of the LCD.
2. Affix the upper and lower MSR wires firmly to the slots on the side of the LCD.
3. Use the two M3 screws to lock the MSR firmly in place on the body of the LCD display.
Customer display installation view:
2.4 Customer Display Installation
1. Screw the Customer Display relay board into place using three M2 screws.
2. Screw the Customer Display Stand into place on the base using two M3 screws.
3. Screw the Customer Display into place on the stand using two M3 screws.
4. Plug the RJ-45 phone jack into the appropriate socket on the monitor base.
Installation view:

11
2.5 LCD operating angle range
The operating angle of the LCD touch panel ranges between 0°horizontal to 90°vertical.

12
2.6 LCD Display and Combo Cable Composition
A --- 3 USB extension (Black)
B --- 4 MSR and keyboard PS/2 interface (Purple) [optional]
C --- 2 Customer Display (Gray) [optional]
D --- 5 DC 12V Plug
E --- 6 Analog DB-15 type VGA (Blue)
F --- 1 Audio (Green)
G --- 7 Touch (Black)
※ All of the connector’s colors conform to PC99 rules.
A
B C D EFG
BC DEF G
Auxiliary Function COMBO Cable
Front Footprint External USB
1 2 3 4 5 6 7
5
DC 12V adapter
Touch Function COMBO Cable

13
2.7 OSD Buttons
:Pressing this button turns the display system power on or off
Menu: Pressing this button pops up the OSD menus on the screen and can be used to select the
OSD control options on the screen
＋: This button is used to increase the value of the selected OSD control option
－: This button is used to decrease the value of the selected OSD control option
Auto: Automatically sizes, centers and fine tunes the video signal to eliminate noise and distortion
Green: Power on
Power LED: Red: Suspend or no signal input
Power LED

14
2.8 OSD Control
Brightness and Contrast setting Sound control setting
RGB Color setting Clock and Phase setting
Function setting Exit

15
CHAPTER 3 ADDED FEATURES
Your new Pyramid LCD incorporates three significant new features: a touch-screen LCD, a
magnetic card reader and a VFD customer display. Improved view ability panel technology
delivers bright, flicker-free display with an exceptionally wide viewing angle and minimal
reflection for fewer glares, less eyestrain. Increased energy efficiency leads to reduced
energy use and heat generation, lowering cooling and power costs. The Pyramid LCD comes
with a separate MSR, USB Connector on the side of the LCD.
3.1 VFD Customer Display
A VFD customer display is affixed to the housing of the Pyramid LCD behind the LCD. It can
display two rows of up to 20 characters.
3.1.1 General Specifications
NO ITEM Description
1 Display method Vacuum fluorescent display
2 Number of character 40 characters (20 columns x 2 lines)
3 Character font 5 x 7 dot matrix
4 Display color Blue green
5 Brightness 700cd/㎡
6 Character type 96 alphanumeric 13 kinds of international character set
1 kind of user define character
7 Character size 9.2mm x 5. 25mm
8 Power supply 9 - 45V DC
9 Power consumption 3 – 6W
10 MTBF 25000 hours (power on time)
11 Panel dimensions 224 (W) x 93 (H) x 50(D) mm
12 Support dimensions Long support: 219mm
Short support: 88mm
13 Base dimensions 190 (W) x 55 (H) x 96 (D) mm
14 Viewing angle -5 - 60 degrees
15 Rotation angle Maximum 270°
16 Weight 1.25 Kg
17 Operating temperature 5 – 45℃
18 Operating Humidity 30%-85%
19 Storage Temperature -10 - 55℃
20 Storage Humidity 10%-85%
3.1.2 Dip Switch Setting
ON
1 2 3 4 5 6 7 8 9 10 11 12
DIP

16
3.1.3 Command type selection
SW1 SW2 SW3 Command t
yp
e
ON ON ON DSP800 (Default)
OFF ON ON ESC/pos
ON OFF ON ADM 787
OFF OFF ON ADM 788
ON ON OFF EMAX (Aedex)
OFF ON OFF UTC/P
ON OFF OFF UTC/S
OFF OFF OFF CD5220
3.1.4 International character set selection
SW4 SW5 SW6 SW7 Character set Code table ( 80H-FFH)
ON ON ON ON USA PC-437(USA & Europe)
OFF ON ON ON France PC-858 (Euro)
ON OFF ON ON Germany PC-858 (Euro)
OFF OFF ON ON UK PC-858 (Euro)
ON ON OFF ON Denmark I PC-858 (Euro)
OFF ON OFF ON Sweden PC-858 (Euro)
ON OFF OFF ON Italy PC-858( Euro)
OFF OFF OFF ON Spain PC-858 (Euro)
ON ON ON OFF Japan Katakana
OFF ON ON OFF Norway PC-858 (Euro)
ON OFF ON OFF Denmark II PC-858 (Euro)
OFF OFF ON OFF USA Slavonic
ON ON OFF OFF USA Russia
OFF ON OFF OFF USA PC860 (Portuguese)
ON OFF OFF OFF UK Greek
OFF OFF OFF OFF Not used (Default)
3.1.5 Baud rate selection
SW8 SW9 Baud rate
(
b
p
s
)
ON ON 4800
OFF ON 9600
ON OFF 19200 (Default)
OFF OFF 38400
3.1.6 Parity check selection
SW10 Parity & data bites
ON None-parity, 8 data bites
OFF Even-parity, 7 data bites (Default)
3.1.7 Self-test & demo function selection
SW11 Function
ON Enable (Default)
OFF Disable
 SW12 resave

17
3.2 Magnetic Strip Reader (MSR)
The Pyramid LCD has also incorporated an ISO track 1/2/3 MSR with a keyboard wedge
interface onto the side of the LCD display.
3.2.1 General Characteristics
Read/Write Read
Direction Bi-direction
Speed 100 – 1000 mm/sec
Lift Cycle Approx. 300,000 passes (1,000,000 passes is optional)
3.2.2 Track Information
Track 1 2 3
Standard IATA ABA THRIFT/MINTS
Recording Method F2F (FM) F2F (FM) F2F (FM)
Recording Density 210 BPI 75 BPI 210 BPI
Capacity 79 Characters 40 Characters 107 Characters
7 Bits/Characters 5 Bits/Characters 5 Bits/Characters
3.2.3 Electrical Characteristics
Supply Voltage DC +5V ±5%
Power Consumption (Typ.) 20 mA
Output Voltage (Typ.) +5V
Output Voltage (Min.) 4.5V
Output Low Voltage 0.4V
3.2.4 Physical Characteristics
Weight 36g/1.27oz
Body Material PC & ABS
Cover Weight 18g/0.64oz
Cable Weigh Approx. 4 g / 0.14 oz
Cable Length 230 mm (9.05 lnch)
Decoder Board Weight Approx. 11 g / 0.35 oz
3.2.5 Environment
Operating temperature 0°C to 50°C (32°C to 122°C)
Storage Temperature -20°C to 70°C (-4°C to 158°C)
Operating Humidity 20% to 95% (Non-condensing)
Power ON (Red)
Good Reading (Green)

18
3.2.6 MSR Track Setting
I. The MSR default setting is ISO Track 1 & 2.(For specific/customized track settings,
please advise manufacturer before production)
II. In the event of any requirement to change the MSR setting, please run the ”S64 decoder”
programming software in the attached driver disk.
3.2.7 MSR Track Setting procedure:
1. Select Interface for magnetic card reader.
2. Select Communication item.
3. Select Magnetic Reader Mode (For magnetic reader only).
4. Select Track 1 and 2 only (Factory Default).
(If you want to set track 1 and 2 and 3 only, please select Track 1-2-3)
5. Select Transmit.
6. Select Interface for Keyboard.
7. Download configuration data to decoder.
1.
2. 3.
4.
6.
7.
5.

Magnetic Stripe Reader Characteristics and Setting Procedure
19

20