Daxten IBOOT - User manual

Web Controlled Reboot
Remote power control is just a click away with this IP
addressed, Web controlled power switch. From anywhere
on the network, even your wireless PDA, you can
securely access iBoot and control power.
Point your browser to iBoot's IP address, enter the Pass-
word and your one click away from power ON, OFF or a
timed Reboot. It's that simple.
iBoot can also be used to automatically detect failures
and perform a timed reboot or other power control func-
tion. The unique Auto-Pingand Heartbeat Detect features
allow iBoot to monitor any device on the network and take
automatic action whenever the device is down.
iBoot can also be controlled directly via TCP messaging
or free applet, makingit ideal for integration into auto-
mated network management systems.
ClickHere.....to.......ClickHere
Hot Spots
ATM Cash Machines
HVAC
Emergency Generators
Remote Alert Systems
Energy Management
Anywhere withnetworkaccess
Routers
Kiosks
Servers
Cell Sites
Reboot
Security
Anything
Use iBoot for:
Improved 10/100 Hub Circuit
Auto SensingEthernet Uplink/Downlink
Auto Ranging105 - 240 VAC
Heartbeat Detector for Automatic Operation
Remote Power Control
is now just a mouse click away!
www.dataprobe.com 800-436-3284

• 11 Park Place, Paramus, NJ 07652 •
• 1-800-436-3284 • 201-967-9300 • Fax: [phone] •
www.dataprobe.com • email: [e-mail]
Find Out More:
www.dataprobe.com/power/iboot.html
NETWORK
iBoot
Device Under
Power Control
PC with Web Access for control.
A/C Source
iBoot
Remote Power Control
from any Web Browser
Benefits
No field trips required for Reboot. Save time
and money by eliminating service calls and
reducing downtime to a minimum.
No special software required. Works with any
forms capable browser. Easy Web Adminis-
tration for all configuration.
Separate user and administrator passwords.
Deploy iBoots throughout your organization.
Use on any Ethernet IP network. Public or
private. Supports DHCP and alternate ports
for Web control.
Auto-Ping and Heartbeat Detector provide
Automatic Operation for crashed devices.
Auto-Ping will pings a device while Heart-
beat listens for periodic message. Complete
control over frequency and timers. Devel-
oper Assistance and software tools are free.
Control iBoot directly from your software ap-
plication for the highest degree of power con-
trol integration. The iBoot control protocol is
simple to implement and freely available.
Use iBoot control program to call power con-
trol from any network management
system:IPSentry™ What'sUp Gold™, etc.
Reduce cabling and simplify installation. One
cable from your network closet serves both
the iBoot and server, kiosk, etc. Auto-sens-
ing for uplink/downlink eliminates the need
for expensive crossover cables.
Auto ranging power input. Deploy iBoot any-
where in the world. iBoot uses IEC320 Con-
nectors and includes line and extension
cords for North America. 12 Amp Switching
Current for most Servers, Routers, Kiosks,
etc. 10 Amps at 220 VAC
110/220 VAC
Built in 10/100 Hub
Direct TCP and
Software Control
Automatic Reboot
Operation
IP Addressed,
10/100Base-T
Dual Password
Protected
Web Control
Features
Access from any
Network point
Specifications
Power Input
Connectors: Power In
Power Out
Power Switching:
Communication:
Protocols:
Browser Requirements:
Security:
Physical:
Approvals:
105-125 or 210-240 VAC Auto Ranging
IEC 320 Plug.
Linecord for North America Included
IEC 320 Receptacle.
Extension Cord for N.Amer Included
Up to 12 Amps at 105-125 VAC,
10 Amps at 210-240 VAC
Dual 10/100base-T with built-in hub
Cat5 Cable Provided
IP Addressable. HTTP Web Server built-in.
UDP Messaging Protocol.
Auto-Ping Protocol
Heartbeat Protocol
Netscape 3.0 or IE 3.0 or greater
Dual Password Protected
2.70" H x 3.25" W x 4" D
Weight: 1.0 lb.
FCC Part 15, UL/cUL Listed and CE Marked