DBHDD University VADDIO User manual

!
VADDIO CAMERA USAGE AND SETUP
Accessing the Vaddio Camera Control Panel
1. Press the POWER button on the top of the remote
2. Touch the BROWSER Icon To Launch the Camera Control Panel.
3. Once Camera Control Panel opens you can adjust the camera using
the buttons on the page (up, down, left, right, zoom, etc.) (Tip: double click the screen to make it
larger or smaller)
VADDIO CAMERA PRESET SETUP
To Set a Preset Camera Position:
1. Set camera to position you want to save
2. Press the “STORE” button then press the preset number you want to store (1-6)
3. To Recall a Preset camera position Press the “PRESET 1” to “PRESET 6”

!
VADDIO CAMERA TROUBLE SHOOTING
Setting the Screen back to Vaddio Control Panel:
1. If the Camera Control Panel is not showing on the screen Press the HOME button (2nd to the left
button at the bottom of the screen shaped like a house) then press the BROWSER Icon (picture
of earth)
2. If a different IP address is showing in the top of the camera page press the Multipage View
button (3rd to the left button at the bottom of the screen)
3. Swipe the pages upward to close them out
4. Press the HOME button then Press the BROWSER button to launch the Camera Control Panel.
(refer to step1 images)
NOTE: Please, Do Not unplug any of the cables going from or to the computer unless you
have notified the training department and been cleared to do so.
!