Ikegami HDK-790EXIII User manual

PHASE Engenharia Ind.e Com.Ltda
Av.Olegário Maciel 231, Lojas 101 a 105 - Barra da Tijuca, CEP 22 621 200
Rio de Janeiro, RJ, Brasil - Tel [phone], Fax [phone]
e-Mail: [e-mail] - Web: www.phase.com.br

PHASE Engenharia Ind.e Com.Ltda
Av.Olegário Maciel 231, Lojas 101 a 105 - Barra da Tijuca, CEP 22 621 200
Rio de Janeiro, RJ, Brasil - Tel [phone], Fax [phone]
e-Mail: [email protected] - Web: www.phase.com.br

The Latest Technology
Multi-format Full Digital HDTV Camera System
HDK-79EC
High Definition
Leading-edge CMOS sensor technology,
featured in several innovative models,
pushes the state-of-the-art in End to End Digital,
Multi-format HD Cameras.

Advanced CMOS sensors are employed to achieve superb picture quality. CMOS
sensors have wide dynamic range and in principle, no smear since electric charges
are not shifted throughout the imager which is the cause of vertical smear in CCDs.
Instead each pixel of the CMOS sensor has it's own amplifier (which changes electric
charges to voltage signals). So it performs signal amplification on a pixel basis.
The CMOS sensors can be readout in either
progressive or interlace, supporting native
multi-format operation. They also have the
capability of high speed operation for slow
motion and other special applications (the HS
model uses the same standard CMOS
sensors, so camera upgrade is practical).
The Advanced CMOS sensors used in the
HDK-79EC include system-on-chip technology,
so not just imaging, but also a range of
support circuity is included within the sensor
itself. The result is a flexible sensor in a small
package with low power consumption.
The output of the sensors is digital, providing
for the first time, a true end-to-end digital
solution.
State-of-the-Art, HDTV Native multi-format CMOS camera
State-of-the-Art, HDTV Native multi-format CMOS camera
Revolutionary 2/3-inch 2.5 Mega-pixel CMOS sensors
The HDK-79EC achieves outstanding
performance to meet the critical needs of
today and tomorrow, with exceptional
functionality and superior reliability.
For extraordinary flexibility, the HDK-
79EC is designed as a docking style camera
head, allowing configuration as a fiber,
triax, or self-contained camera.
The SE-79D, System Expander, adds the
flexibility to rapidly change between full
featured studio camera, and shoulder or
jib mounted portable camera.
CMOS Block Diagram System-on-Chip
Sync / Control
Digital PGA
Control
Logic
High-Speed ADC
Blas
Generator
PGA
PGA
1936 x 1086 visible pixels
72 black columns
4 black rows
High-Speed ADC
Horizontal Mux(top) & FPN ASP
Dynamic noise reduction
Horizontal Mux(bottom) & FPN ASP
Dynamic noise reduction
Vertical Scanner
line mixing
binning
FPN D/ASP
-24~72dB
@0.006dB
iSoC
Memory
Digital Data Out
12bit / 150MHz
24bit / 75Mhz
PGA
PGA
HDK-79EC

To improve the HDK-79EC's ability to handle the high contrast scenes frequently encountered in field production, several new functions
are programmed into Chip C4. A multiple break point Smooth Knee give progressivly more level compression as the highlight level
increases. The result is more natural reproduction of modest highlights while maintaining the broad dynamic to handle significant
highlights. Super Color Knee and Knee Detail are added to improve color and sharpness in the knee process. Zoom tracking Detail
helps compensate for loss of MTF shooting with long telephoto lenses.
Incorporates Ikegami's sophisticated Chip C4 ASIC video processing technology
Revolutionary 2/3" 2.5 Mega-pixel CMOS (Complementary Metal Oxide Semiconductor) imaging sensors
Multi-format capability, Multiple application use
Enhanced operational flexibility with a wide variety of peripherals.
Ikegami's video processing know how greatly influenced the development of Chip C4 ASIC
(Application Specific Integrated Circuit). Chip C4 processes the digital video output from the
CMOS sensors including Knee, gamma, color and DTL correction. For example, various DTL
functions, Soft DTL, Skin tone DTL, horizontal / vertical / diagonal DTL, and DTL boost
frequency are controlled in Chip C4 with up to 38-bit internal quantization.
Chip C4
Ikegami is the world's leading supplier of state-of-the-art broadcast and professional
video production equipment.
The HDK-79EC adopts leading-edge CMOS sensor technology as an industiry first,
providing supreme picture quality and multi-format HD performance in this Full Digital
camera system configurable for portable, field, or studio use.

By expanding the small edge in the low constrast object and
compressing the edge component in the high contrast
object, the impression for the glare of picture with too much
edge is reduced and the natural image, which is more visual
for human being, can be obtained.
Includes a color correction function that enables hue and
saturation to be adjusted for each of the six primary colors
(R, G, B, Cy, Y, Mg), plus another function to make color
correction of two user-selected colors of the subject. Color
correction before Gamma Circuit provides more true color
reproduction.
Improved visual reproduction of subjects such as texture
and sheen, and richer reproduction of details in skin tone
and in dark backgrounds is realized.
The Super Color Knee system maintains color saturation
without changing the hue of the highlighted parts and
provides natural color reproduction under high luminance
conditions.
KNEE DETAIL function provides better expression in highlight scene,
improving on previous Knee Aperture. Vertical and Horizontal contour
corrections are independently made to the highlight video where the
KNEE is processed.
(Supported by OCP-200/MCP-150/MCP-200/RCP-50B)
All menu items including Level and Control settings can be preset and
easily recalled from the control panel. It is also easy to reset to factory
settings. Preset for 3 MATRICES can be set. The MATRIX settings can
be preset for different lighting, and then selected by the control panel.
(Supported by OCP-200/MCP-150/MCP-200/RCP-50B)
A Master FLARE function enables one adjustment to control the overall
level of FLARE while maintaining the tracking of the R/G/B channels.
This feature makes it possible to control flare during operation since
the color balance is never off.
(Supported by OCP-200/MCP-150/MCP-200/RCP-50B)
This function makes a difference in the edging of the image exclusively
in the viewfinder, to make the precise point of focus easier to find, and
to make it easier for the cameraperson to focus.
Sophisticated features made possible with digital technologies
Full digital processing Camera Control Unit, the full size CCU-890
The full size CCU-890 is designed for use of an optical
fiber connection between the HDK-cameras, ensuring
high-quality signal transmission and long cable runs, up
to 3000m for Studio camera or Portable camera with
System Expander. Both HDTV and SDTV formats are
supported simultaneously in both digital and analog
form with a wide range of built-in interfaces. The CCU-
890 also features embedded audio in the SDI output
signals, as well as, frame synchronizer for return video
input signals. Furthermore, the CCU-890 supports dual
link with simple board exchange for high speed
operation.
(note: camera head must also support for dual link)
Space-Saving Design
Suitable for small-sized HD vans and rental / flight-pack
systems A half-rack base station BS-89 is available,
permitting full SMPTE fiber cable extention with a
compact base station. It supports multi-format HDTV as
standard, SDTV format available with optional boards.
The BS-89 supports camera cable length up to 1000m
for the Portable camera with System Expander.
CCU-890 front
CCU-890 rear
BS-89 rearBS-89 front
Super KNEE
Enhanced Digital DTL
FINE DTL function KNEE DTL function
Menu Preset function
Master FLARE
Clear VF DTL function
Six-Vector Color Corrector + Two-Axis Custom Color

Transmission Distance
Up to 850m (2,800ft.) by 8.8mm diameter triax / Fujikura
Up to 1,550m (5,100ft.) by 14.5mm diameter triax / Fujikura
Up to 500m (1,600ft.) by 9.2mm diameter triax / Belden type 9267
Up to 1,000m (3,300ft.) by 13.2mm diameter triax / Belden type 9232
TA-79HD Triax Adaptor (Docking type)
CB-79HD
State-of the-Art, expanding HDTV System accessories
Triax Adapter System
An optional triax board set is available for the new CCU-890M, providing built-in
support for either triax or fiber camera cable with simple front panel selection. The
result is a highly flexible camera system which can be setup for either cable type in a
matter of minutes.
The CB-79HD is a 1RU converter offering the same flexibility when used with other CCUs.
High Performance Viewfinders
SE-79D System Expander
The SE-79D System Expander enables the use of
the 9-inch viewfinder and full studio lenses with
the HDK-79EC, converting the portable camera
into a full facility studio camera. Installation of
the camera into the SE-79D is very easy, and
conversion back to portable configuration is
quick for maximum operating flexibility.
Exploiting new CMOS technology, the HDK-79EC/HS offers 1080/60p and
720/120p High Speed sensor readout for special applications, including
Super Slow Motion.
The newly developed CMOS sensors include dual outputs as standard,
enabling high performance and high speed 1080/60p, 720/120p, and
1080/120i formats. The HDK-79EC, FA-79A, and CCU-890 can be ordered
in the optional HS-configuration, and in this configuration the camera will
support both standard and high speed HD formats, further increasing
flexibility and future proof protection.
For the HDK-79EC, a 2-inch 16:9 high
definition VF for portable application is
available. Employing a magnifying eyepiece
in the 2-inch VF, visibility is further improved.
In addition, a 9-inch LCD color viewfinder is
available as an option.
The Latest Technology Multi-format Full Digital HDTV Camera System
HDK-79EC
CCU-790A
or
CCU-890M
CCU-890
FA-79A Fiber Adapter
TA-79HD Triax Adapter Triax CableFiber Cable
CCU-890M + TA-890CCU(Option)
Coax Cable

Network configuration including POV cameras. BS Hub integrates existing CCUs, Base Stations,
and POV cameras. CP Hub powers and distributes data to up to eight (8) control panels.
Cutting-edge, Network based Control Panel System
The OCP-200 / MCP-200 is a new Network based control panel system offered as an alternate to the traditional Ikegami
style control panels. The Network system allows any OCP-200 to control any camera with assignment set at the OCP
itself. System wiring is simplified with control of up to 96 cameras via a single coax cable between CCU locations and
video control locations. The OCP-200 and MCP-200 include touch screen LCDs. The depth-of-control of the OCP-200 can
be selected from basic to complete to fit the customers‘ operating discipline. Conventional one by one camera control
connection is also available.
BSH-200
CCUs
CCUs
POV camera
CPH-200
CPH-200
CPH-200
CPH-200
Coax Cable
CP Cable
OCPs
OCPsOperating Position #1
OCPsOperating Position #2
Central Maintenance Position
Coax Cable
CP Cable
Expanded network configuration. New CCU-890 and BS-89 can connect directly to the network.

The Latest Technology Multi-format Full Digital HDTV Camera System
HDK-79EC
System Diagram
Cover
Dust Proof
Cover
Rain Proof
Cover
Cold Weather
Cover
Lens
Manual Control
Zoom Lens
Prompter
Adaptor
Teleside
Converter
Wide
Attachment
Filter
W/Diascope
or
W/O Diascope
Remote Focus
Control Set
Remote Zoom
Control Set
12Pin
Zoom Lens
Script
Lamp
Case
Camera Carrying Case Soft Carrying Case
VF System
Zoom Remote
Control Box
Tripod
Coaxial Cable
Headsets
(PROD/ENG)
OCP
CSU
MCP Cable
Max. 30m
CP Cable Max. 300m
HDK-79EC
HDK-79EC/HS
(High Speed Type)
Tripod Mount Plate
CCU-790A / CCU-890
CCU-890 / HS
High Speed Type
Camera Control Unit
Slo Mo Server
High Speed Type
Camera Control Unit
PM
WFM
Coaxial Cable
WFM Cont Cable
MCP
MIC-1
HD
Monitor
HD
Monitor
Coaxial Cable
MON OUT
SDI OUT
Field Hood
Studio Hood
Carrying Case
•FA-79A
•FA-79A / HS
(High Speed Adapeter)
Fiber Camera Adaptor
TA-79HD
Triax Camera Adaptor
Fiber Cable
max 3000mmax 1000m
PM
WFM
Coaxial Cable
AC
MCP
2-inch VF (VF41XHDE)
Standard VF
9-inch LCD color VF
(VFL-900HA)
MIC-2
Headsets
(PROD/ENG)
Triax cable 75m-500m
by 9.2mm
(BELDEN Type 9267)
MIC-1
MIC-2
Field Hood
Studio Hood
Carrying Case
5-inch VF
(VF13XHD)
Mic Holder
Attachment
Tally Box
• 9-inch LCD color viewfinder
• Script Lamp
• RET SW Box
• Pedestal / Tripod System
SE-79D
System Expander
SE Main Body
Lens
Supporter
• Lens
• Lens Accessary
Headset
PM
WFM
BS-89
Base Station
Note :
Use for CCU - 790A only
ON
STBY
CCU
OFF
EXT
POWER
CB-79HD
Converter Box
CB-79HDCONVERTER BOX
TRIAX
OPTICAL
1080i
720P
ALARM
QTV
POWER
FAN
RX
MAIN/STBY
TEMP
TX
PM
Note : CP Cable Max 300m
Note : When the "OCP-200" is used as an OCP,
• CP cable max. 50m (Network Hub)
• CP cable max. 80m (Direct)
OCPs
CP Cable
CCUs
New and traditional control panels can be directly
connected to the cameras on a one-by-one basis.
CCU-890
BS-89
Headset

The Latest Technology Multi-format Full Digital HDTV Camera System
HDK-79EC
H48F094-HI1 Printed in Japan
Design and specifications are subject to change without notice.
HEADQUARTERS
WESTCOAST OFFICE
SOUTHWEST OFFICE
MIDWEST OFFICE
SOUTHEAST OFFICE
37 BROOK AVENUE, MAYWOOD, NJ 07607
Phone:[phone] Fa x : [phone]
2631 MANHATTAN BEACH BLVD., REDONDO BEACH, CA 90278
Phone:[phone] Fax:[phone]
773 BEARDEN WAXAHACHIE,TX 75167 Phone:[phone] Fax:[phone]
747 CHURCH ROAD, UNIT C1, ELMHURST, IL 60126 Phone:[phone] Fax:[phone]
5200 N.W. 33RD AVENUE, SUITE 111 FORT LAUDERDALE, FL 33309 Phone:[phone] Fax: [phone]
IKEGAMI ELECTRONICS (U.S.A.), INC. URL http: //www.ikegami.com
JQA-0773
Certified
JQA-EM3888
Certified
Ratings
Image sensor 2/3-inch 2,500,000-pixel CMOS
Optical system 2/3-inch, f1.4 prism
Lens mount BTA S-1005B ( standard )
Viewfinder 2-inch B/W viewfinder ( standard ),
5-inch B/W viewfinder ( option ) or
9-inch color LCD viewfinder ( option )
Input signals
HDK-79EC/FA-79A
External SYNC signal SYNC 0.6Vp-p ±6dB
Audio signal* -60, -50, -40, -30, -20, -10, 0, +4dB 6001( 2ch, balanced )
( after selecting, variable 5dB available )
Intercom signal 2ch ( ENG/PROD ) ( Standard : XLR type )
CCU-890
[ HDTV system ( SMPTE274M and SMPTE292M ) ]
Genlock signal PS 1.0Vp-p or Sync 0.6Vp-p ±6dB 751bridged
Return video signal HD-SDI : 751, Single End 4ch
VBS/D1 : 751, bridged 2/4ch
Q-TV signal VBS 1.0Vp-p 751, Single End 2ch
Intercom/Tally
Intercom ( ENG/PROD ) ( 4-wire or Clearcom or RTS )
4-wire 0dBm 60012ch
Clearcom -15dBs 20012ch
RTS 0dBm 20012ch
Tally contact/voltage R, G 2ch
Program sound 0dBs 60012ch
Output signals
HDK-79EC
Video signals
MON HD-SDI Monitor, VF or Return Select 1ch, 751( BNC Connector )
Analog Monitor signal Viewfinder Video 1ch, 751( BNC connector )
FA-79A
HD SDI signal Y, PB, PR4:2:2 serial digital 1ch
( BNC connector ) ( SMPTE292M )
( 2ch for HDK-79EC/HS High Speed version )
Q-TV signal Analog signal 2ch, 751( BNC connector )
( 1ch for HDK-79EC/HS High Speed version )
Intercom signal 0dBs 2ch ( ENG/PROD ) ( Standard: XLR type )
VTR signal BTA S-1005B ( Factory option )
CCU-890
RGB signal
( HDTV/SDTV ) ( Option ) RGB or Y, PB, PR7511ch
( either HDTV output or NTSC output is selected )
HD SDI signal
( SMPTE294M ) 7514ch
HD-WFM signal HD-SDI 7512ch
HD-PM signal PM-SDI 7512ch ( MON can be selected )
Composite video signal VBS 1.0Vp-p 7512ch
SD-SDI(D1) ( SMPTE259M ) 270Mbit/s 0.8Vp-p 7512ch
SD-WFM signal ( Option ) R,G,B,Y,ENC select 1.0Vp-p 751
or SDI 7512ch
SD-PM signal ( Option ) R,G,B,Y,ENC select 1.0Vp-p 751
or SDI 7512ch
Audio Signal
Mic 0dBm 60012ch
Digital audio AES 3ID 1Vp-p 7511ch
( In conformity with AES/EBU )
Intercom/Tally
Intercom ( ENG/PROD ) ( 4-wire or Clearcom or RTS )
4-wire 0dBm 60012ch
Clearcom -15dBs 20012ch
RTS 0dBm 20012ch
Filter 1 2 3 4 5
ND CAP 100% 25% 6.2% 1.6%
ABCDE
CC CROSS 3200K 4300K 6300K 8000K
Electric color temperature 5600K
Ambient temperature -20˚C ~ +45˚C ( -4˚F ~ +113˚F )
CCU-890 : 0˚C ~ +45˚C ( +32˚F ~ +112˚F )
Relative humidity 30%~90% ( Non-condensing )
Operating voltage +11~16VDC
Weight
HDK-79EC 5.7kg ( 12.57 lbs ) ( without lens )
CCU-890 approx. 30kg ( 66.14 lbs )
Dimensions
HDK-79EC W107 X H232 X D375mm
( W4.21 X H9.13 X D14.76 inches )
CCU-890 W482.6 X H132.6 X D481mm
( W19.00 X H5.22 X D18.94 inches )
Performance
Sensitivity F8/2,000 lx
S/N
HDTV system 56dB ( Typical )
Modulation depth
HDTV system 45% or more 1080/59.94i at 27.5MHz
40% or more 720/59.94p at 28.875MHz
45% or more 1080/50i at 27.5MHz
40% or more 720/50p at 28.875MHz
45% or more 1080/24p at 27.5MHz
NTSC system 90% or more ( 400 TV lines, 5MHz )
Limiting resolution
HDTV system 1000 TV lines ( 1080/59.94i, 1080/50i )
700 TV lines ( 720/59.94p, 720/50p )
Video frequency response ( Base Station output )
Y output
Below 60Hz Falling
60Hz~30MHz within 1.0dB
Over 30MHz Falling
PB, PRoutput signal
Below 60Hz Falling
60Hz~15MHz within 1.0dB
Over 15MHz Falling
NTSC output signal ( Ych 100kHz, output signal from external camera control equipment )
Below 60Hz Falling
60Hz~4.5MHz within 0.5dB
4.5MHz~8.0MHz within 1.0dB
Over 8MHz Falling
Audio Frequency response ( Base Station output )
Y output
Below 100Hz Falling
100Hz~10kHz within 1.0dB
Over 10kHz Falling
Contour correction
Vertical 5line
Horizontal Boost frequency, 13MHz~24MHz ( HDTV )
Boost frequency, 2.7MHz~8.9MHz ( SDTV )
Gamma OFF, 0.35, 0.4, 0.45
Gain -3dB, 0dB, +3dB, +6dB, +12dB ( Standard )
Power consumption
HDK-79EC Camera Head only: 26W
2-inch VF: 6W