DCS BFG-30BS User manual

34 Summer 2008
Dual Side Burner/Sink Unit
BFG-30BS 30” Dual Side Burner/Sink with optional cart, side shelves, wood inserts and back bar
Everyone desires all of the conveniences they have in their indoor kitchen when they are
cooking outdoors. Now, with the Liberty Collection’s Dual Side Burner/Sink unit you can
have them. With a sink fully integrated into your outdoor appliances you can easily fill pots
and wash your hands. Suitably placed next to the dual side burners, filling your pot no longer
requires a trip indoors.
ADDITIONAL FEATURES:
• 2 x 17,000 BTU side burners
•Platform style grates allow easy movement from one burner to the other
•Sink can be hard plumbed or portable
•Flat stainless steel covers included
outdoorLibertyCollection
magalog summer 2008.2.qxd 4/24/08 1:58 PM Page 34

Summer 2008 35
Dual Side Burner/Sink Dimensions
(with optional grill cart)
Dual Side Burner/Sink Model: BFG-30BS
Cart Model: CAD-30 (shown with optional side shelves)
Dual Side Burner/Sink Island
Preparation
Dual Side Burner/Sink Model: BFG-30BS
Weencourage you to find out moreabout these features and learn how they can
make your cooking experience more enjoyable by visiting our learning page at:
www.dcsappliances.com.
Because of continuing product improvement these specifications are subject to
change without notice.
36”
26.5”
24” 30”
47-11/16”
10-1/2”
MODEL NUMBER BFG-30BS
SIDE BURNERS 2 @ 17,000 BTU/HR
SHIPPING WEIGHT (SIDE BURNER/SINK HEAD) 120 LBS.
SHIPPING WEIGHT (OPTIONAL CART) 120 LBS.
SHIPPING DIMENSIONS
Ordering Data:
Please specify gas type (natural or propane) when ordering
Gas Requirements:
Natural
•1/2" NPT male with a 3/8" flareadapter
•Operational Pressure: 4” W.C.
•Supply Pressure: 6" to 9” W.C.
Propane
•1/2" NPT male with a 3/8" flare adapter
•LP hose with a quick disconnect & fitting are shipped
connected
•Operational Pressure: 10” W.C.
•Supply Pressure: 11" to 14” W
.C.
Power Requirements:
•9V battery
Island Ventilation Requirements:
It is recommended that adequate ventilation holes must be
provided in the base of an enclosure in the event of a gas leak.
Side Burner/Sink Placement:
DO NOT build side burner/sink under overhead unprotected
combustible construction. Use only in well-ventilated areas.
These units are for outdoor use only. If located in a consistently
windy area (oceanfront, mountaintop, etc.) a wind break will be
required.
Conversion Kits:
NG to LP and LP to NG conversion kits areavailable from your
dealer.
Accessories
•Stainless Steel Cart(CAD-30)
•Dual side burners for built-in application
•Stainless Steel Access Doors for built-in application
•Stainless Steel Access Drawers for built-in application
•Insulated Jacket for built-in application
•Brazilian Cherry Chopping Board that fits in cart optional
side-shelf
•Vinyl Grill Cover
•Wok and Wok Ring for use on side burners
access doors
(ADN20x30)
access drawer
(ADR 30)
Vent
#
4” x 4” opening for
gas supply line
3”to non-combustible
construction and
12” min. combustible
construction
*Standardcut-out dimensions for non-combustible enclosure
** Insulated jacket cut-out dimensions for combustible enclosure
#Island installation to use minimum of 3 vents providing
10 square inches per vent (typical)
Vent #
Vent #
32” X 32” X 16”
(SIDE BURNER/SINK HEAD) (HEIGHT X WIDTH X DEPTH)
magalog summer 2008.2.qxd 4/24/08 1:59 PM Page 35