DDS Cervitrac User manual

DDS CERVICAL TRACTION COLLAR

Thank you for choosing DDS
and welcome to an enjoyable life
free from neck pain.

Table of Contents 3
Table of Contents
4What’s inside the box
5 What it is & how it works
6Features of the DDS CervitracTM
7 How to use the product
9Precautions
10 Maintenance
11 Registration & Warranty Card

4 What’s inside the box
What’s Inside the Box
Manual
Front
bracket
Chin pad
Stand pad
Head
support
Neck
support
Chest pad
Velcro
Velcro
Back bracket
Belt
Gauge
Pump handle Pump clip
Pump
hose
Air Injection Nozzle
(Front) (Back)
CHIN COLLAR
TRACTION BELT STAND
HAND PUMP

What it is & how it works 5
What it is & how it works
The DDS Cervitrac is the most comprehensive Cervical Traction Device for treating neck
pain. It’s the rst device that oers the option to receive pneumatic traction while lying
down in the supine position or upright for mobile treatment. The soft traction collar can
detach from the Cervitrac frame giving you total freedom to treat your condition however
you wish. It’s lightweight, easy to use and will reduce disc pressure within the cervical spine
eectively eliminating pain.
Before Treatment
The herniated or bulging cervical disc, or herniated nucleus
pulposus, applies pressure on the nerve root, ultimately causing
pain.
After Treatment
The DDS Cervitrac alleviates pain and assists active-rehabilitation
by allowing the cervical disc, or nucleus pulposus, to return to
its natural position. By increasing the intervertebral space,
pressure applied on the nerve root is relieved, naturally
reducing pain.

Features of the DDS Cervitrac
1. The DDS Cervitrac can assist with the following indications:
• Whiplash injuries (injuries which do not involve breakage or dislocation of the bones)
• Job-related neck pain, i.e., prolonged computer use, sewing, etc.
• Sports injuries (without breakage or dislocation)
• Joint changes
• Degenerative changes (arthritis)
• Joint pain/symptomatic facet Joint
• Muscle spasm and guarding
• Postcompression fracture
• Nerve impingement (subacute-chronic phase)
• Herniated disc
• Narrowing foramen
• Spondylolisthesis
• Spondylolysis
• Compressions or radiculopathies
2. Treats bulging and/or herniated discs eliminating neck pain.
Bulging and herniated discs are reduced by elongating
the intervertebral spaces in the cervical spine.
3. Relaxes muscle spasms, muscle cramps, strain and pain.
4. Helps treat degenerative disc disease, spinal stenosis, sciatica
and spondylolysis.
5. Helps maintain proper posture.
6. Assists individuals with strenuous jobs.
7. Is very lightweight and comfortable.
8. Is made of highly durable material.
9. Simple to use.
6 Features

How to use the product 7
IMPORTANT : You MUST release the air completely out of the device before removal.
You can do so by pulling the air injection hose as shown above in Step 2.
WARNING : Do not attempt to sit up, stand or move your head left or right when using
the Cervitrac from the supine position. You must remain in the supine position until
the Cervitrac is completely removed.
How to use the product
Place the Stand on a level oor surface. Gently pull the Air Injection Hose to release any remaining air
from the Traction Belt. The Belt must be completely deated
before application.
While looking straight up, place the Chin Collar on your chin
and fasten it to the Traction Belt via the Velcro attachments.
Connect the Hand Air Pump to the Air Valve precisely
attaching the Air Injection Tong with the Air Valve.
Proceed to slowly use the Hand Air Pump to inate the Belt.
Inate at a rate that is no faster than 1 stroke in each direction
every 5 seconds.
Start with a low pressure (5 PSI) on the rst day and gradually
increase to 7 PSI on the second day and then to 9 PSI on the
third day. Recommend usage is 7~9 PSI or less depending on
your comfort.
Wear for 15-30 minutes. You can adjust the air pressure at
anytime to your comfort level by momentarily pressing the Air
Valve to release air. Release pressure to reach a comfortable PSI
level if experiencing any discomfort.
Attach the Traction Belt to the center of the Stand via Velcro. Lie down and carefully place your neck on the center of the
Traction Belt with your legs bent at a 45ºangle.
Supine Position

WARNING : Do not attempt to lie down or move your head left or right while wearing the Brace.
IMPORTANT : You MUST release the air completely out of the device before removal.
You can do so by pulling the air injection hose as shown above in Step 1.
Gently pull the Air Injection Hose to release any remaining air
from the Traction Belt. The Belt must be completely deated
before application.
Connect the Traction Collar to the Fixed Chin Collar on one
side to prepare positioning on your neck.
Position the Fixed Chin Collar so that the chin ts comfortably
in the chin groove. Make sure the device is attached evenly
and is centered around your neck.
Connect Hand Air Pump to the Air Valve precisely attaching
the Air Injection Tongs with the Air Valve.
Proceed to slowly use the Hand Air Pump to inate the belt.
Inate the bladder at a rate that is no faster than 1 stroke in
each direction every 5 seconds.
Start with a low pressure (5 PSI) on the rst day and gradually
increase to 7 PSI on the second day and then to 9 PSI on the
third day. Recommended usage is 7~9 PSI or less depending
on your comfort.
Wear for 15-30 minutes. You can adjust the air pressure at
anytime to your comfort level by momentarily pressing the Air
Valve to release air. Release pressure to reach a comfortable PSI
level if experiencing any discomfort.
8 How to use the product
Sitting or Standing Position

Cautions with respect to the use of the product 9
Precautions
1. The DDS Cervitrac should be used under the supervision of a licensed
health care provider.
2. Inate with extreme caution. Do not inate at a rate faster than one pump
in each direction every 5 seconds.
3. Start at a slow pace - inate to only 5 PSI on the rst day, 7 PSI on the second day,
9 PSI on the third day. Immediately release air to reach a comfortable PSI level
if experiencing any discomfort.
4. Recommended usage is 9 PSI or less depending on your comfort.
5. Extra caution and care must be taken with patients with TMJ concerns.
6. Do not lie down with the device inated unless starting application from
the supine position with the Cervitrac Stand
7. Do not turn your neck either left or right while wearing the device.
8. Consult a physician if the pain increases.
9. Handle with care; dropping the Hand Air Pump can result in malfunction.
10. Shut the Air Valve tightly before washing.
Water must not enter the device.
For more information regarding washing proceed to page 10.

10 Maintenance
Cleaning, storage, and maintenance
How to clean the product
Storage and maintenance
• Before cleaning, separate the traction belt, the neck support, and the sponge pad from the stand.
• Neck support and stand: Clean with a damp cloth, and let it dry in a shaded area.
• Traction belt: Inject air with a pressure of 5 psi or so into the product, and turn the air inlet in a
clockwise direction to close it so as to avoid water from entering the product. Use a smooth
sponge and gently scrub the product while soaked in water mixed with neutral detergent.
After cleaning, use a dry cloth to blot away excess moisture and let it dry in a shaded area.
• Sponge pad: Scrub the product gently while soaked in water mixed with neutral detergent.
After cleaning, use a dry cloth to blot away excess moisture, and let it dry in a shaded area.
• Do not wring out or use the spin cycle of a washing machine.
• Do not use any chemical product other than neutral detergent when cleaning the product.
• Do not apply heat from a dryer when drying the product after cleaning.
• Release air when the product is not in use.
• Keep the product out of reach of children.
• Keep the belt away from sharp objects or high-temperature and ammable materials,
including heaters.
• Store the product in a place where temperature/humidity levels are not high,
and avoid exposure to direct sunlight.

Limited 3 Year Warranty
DDS, Inc. will repair or replace the unit free of charge for a 3 year period from the date of purchase. The warranty is covered only if the device is defective
in workmanship or materials.
To obtain service under this warranty, please mail the warranty card at the time of purchase. You may then return the defective product to the service
center on the warranty card, together with your purchase receipt and $5.00 postage and handling. In the absence of a purchase receipt, an invoice must
to be produced from the seller. This warranty does not apply for any misuse and/or deliberate mishandling of our products.
Any implied warranty, obligations or liabilities, including but not limited to the implied warranty of merchantability tness for a particular purpose, shall
be limited in duration to the 3 year duration of this written, limited warranty.
Some states do not allow limitations on how long an implied warranty lasts, so the limitations may not apply to you.
In no event shall DDS be liable for any special, incidental or consequential damages for breach of any other warranty, express or implied whatsoever.
Some states do not allow the exclusion and the limitation may not apply to you.
This warranty gives you specic legal rights. These rights may vary according to your state laws.
Registration & Warranty Card 11
Registration / Warranty Card
FIRST NAME: MI: LAST:
ADDRESS 1:
ADDRESS 2:
CITY: STATE: ZIP:
PHONE (DAY): (EVENING)
PRODUCT INFORMATION
DATE OF PURCHASE:
DDS MODEL:
HOW DID YOU BECOME AWARE OF DDS?
DDS CervitracTM
MAIL TO SERVICE CENTER: DDS, INC.
100 Commerce Way, Suite 5
Hackensack, NJ 07601 U.S.A.

www.DDSbelt.com
Disc Disease Solutions, Inc.
100 Commerce Way, Suite 5
Hackensack, NJ 07601
U.S.A.
Tel: [phone]
Fax: [phone]
[email protected]
For Canada please contact
Tel: [phone]
[email protected]