DecorQuip Dream Range 191685 User manual

DREAM 15 CHANNEL
WALL SWITCH 191685
Dream RangeDream Range
from
FUNCTIONAL FEATURES
• Bi-directional functionality
• Uni-directional functionality
• 15 channels
• Battery replacing tool
• Button lock/unlock option
• Hide/Unhide channel option
• Standard CR2450 cell battery
INPUT VOLTAGE 3V
BATTERY CR2450
TRANSMITTING FREQUENCY 433.925MHz
TRANSMITTING POWER 10MW
OUTSIDE TRANSMISSION RANGE 200m
INSIDE TREANSMISSION RANGE 35m
BATTERY LIFE Up to 2 years
OPERATING TEMPERATURE -5C ~ 50C
TECHNICAL SPECIFICATION
80mm
15mm
Channel selector - UP UP
STOP
DOWN
Channel selector - DOWN
P2 Setting button
Battery
Display screen
Channel ‘0’ button
80mm

PARING A WALL SWITCH AND INITIAL SETTINGS
Motor
jogs x1 Motor
beeps x1
Motor
jogs x2
beeps x3
Release
P1 Press for 2sec
within 10s
PAIRING
COMPLETE
Press P1
for 2sec
Press together
for 2sec
DIRECTION
SWITCHED
Motor
jogs x1
PARING A WALL SWITCH WITH A MOTOR
SWITCHING DIRECTION
Run blind to
top position
Press together
for 2sec
TOP
LIMIT SET
Motor jogs x2
Beeps x3
Run blind to
bottom position Press together
for 2sec
BOTTOM
LIMIT SET
Motor jogs x2
Beeps x3
SETTING THE TOP LIMIT
SETTING THE BOTTOM LIMIT
Before starting the process of pairing a wall switch to a Dream motor, choose the channel to which it
is to be paired. Channel Zero is reserved for simultaneously controlling all blinds paired to a wall switch
and cannot be used for pairing, programming or other adjustments.
If using a battery powered motor, ensure that it is suciently charged to complete the set-up process.
Charging a motor from empty will take approximately 6 hours.
Note:
After pairing a wall switch and before setting limits, the motor will be defaulted to jog-mode. To switch to continuous-mode,
see ADVANCED FUNCTIONALITY - SWITCHING BETWEEN JOG MODE AND CONTINUOUS MODE.

ADVANCED SETTINGS
Hold together
for 5sec
Press for
1sec
Motor
jogs x1 Motor jogs x1 Beeps x1
JOG
MODE
Hold together
for 5sec
Press for
1sec
Motor
jogs x1 Motor jogs x2 Beeps x3
CONTINUOUS
MODE
SWITCHING FROM CONTINUOUS MODE TO JOG MODE
SWITCHING FROM JOG MODE TO CONTINUOUS MODE
Press for
1sec
Motor jogs x2
Beeps x1
SPEED
INCREASED
Press P2
for 1sec
Press for
1sec
Motor jogs x1
Beeps x1
Motor jogs x1
Beeps x1
Press for
1sec
Motor jogs x2
Beeps x1
SPEED
DECREASED
Press P2
for 1sec
Press for
1sec
Motor jogs x1
Beeps x1
Motor jogs x1
Beeps x1
INCREASING MOTOR SPEED BATTERY MOTORS ONLY
DECREASING MOTOR SPEED BATTERY MOTORS ONLY
SETTING A FAVOURITE STOP POSITION
Note:
When in jog mode, holding the up or down buttons will provide continuous-moving temporarily.
Note:
If the motor does not response to INCREASING/DECREASING instructions, it has already reached its upper/lower speed setting.
Press for
1sec
Motor jogs x2
Beeps x3
FAVOURITE
POSITION
SET
Press P2
for 1sec Press for
1sec
Motor jogs x1
Beeps x1
Motor jogs x1
Beeps x1
Run shade to
desired position

ADVANCED SETTINGS CONTINUED
Press for
1sec
Motor jogs x1
Beeps x1
FAVOURITE
POSITION
CLEARED
Press P2
for 1sec Press for
1sec
Motor jogs x1
Beeps x1
Motor jogs x1
Beeps x1
Hold together
for 5sec
Hold together
for 2sec
Jog to desired
position
FINE-TUNE
MODE
ENGAGED
TOP
LIMIT SET
Motor jogs x1
Beeps x1 Motor jogs x2
Beeps x3
CLEARING A FAVOURITE STOP POSITION
FINE-TUNING A TOP LIMIT
Hold together
for 5sec
Hold together
for 2sec
Jog to desired
position
FINE-TUNE
MODE
ENGAGED
BOT TOM
LIMIT SET
Motor jogs x1
Beeps x1 Motor jogs x2
Beeps x3
FINE-TUNING A BOTTOM LIMIT
ADDITIONAL FUNCTIONS
HIDE / UNHIDE CHANNEL FUNCTION
Allows the user to hide or unhide unused or used channels. By selecting a channel, i.e. channel 5, channels 1,2,3,4 and 5 will remain active
while the other 10 unused channels will become hidden.
!
Factory default: 15 channels unhidden
Hold together
for 1sec
Press stop x1
UNUSED
CHANNELS
HIDDEN
Channel activation
con�rmed ‘ ’
Channel 15 appears
on the screen
Select number of
channels in use
UNI-DIRECTION / BI-DIRECTION SWITCHING MODE
UNI-DIRECTION
MODE
BI-DIRECTION
MODE
Hold P2 button while
inserting battery
!
Factory default:
Bi-directional mode

DEVICE
LOCKED
DEVICE
UNLOCKED
Hold for 15sec
Rhymney House, Unit 8, Bedwas House Industrial Estate, Bedwas, Caerphilly, CF83 8DW.
T: 029 2088 0811
Decorquip Ltd
MOTOR SETTING LOCK / UNLOCK MODE
Enables or disables entering the motor setting mode without aecting normal remote blind opreration.
!
Factory default:
Device unlocked
Version 1
ADDITIONAL FUNCTIONS CONTINUED
CONFORMITY DECLARATION
DISPOSAL INSTRUCTIONS
Decorquip Ltd. hereby declare that the Dream Range products are in confirmity with the essential requirements
of the applicable European Directives and, in particular, the Electromagnetic Compatibility Directive 2014/30/EU,
Machinery Directive 2006/42/EC and Radio Directive 2014/53/EU.
Damaged/unused electrical products and batteries are not to be disposed with regular household waste. Dispose of
these motors in compliance with authorities waste regulations. Alternatively, return your motors to Decorquip Ltd.