DEEP EAST SUPPLY Weblazer User manual

DEEP EAST SUPPLY, LLC
Lufkin, TX 75904 DO NOT DISCARD.
Rev: 20201217 Retain a copy of this user manual for reference.
Please note all instructions are subject to change without notice.
Please visit www.deepeastsupply.com for the latest version.
Feedback: [email protected]
User Manual
CONTENTS
1. Introduction .................................................................................................................................................... 2
1.1. Intended Use .............................................................................................................................................................2
2. General Warnings .......................................................................................................................................... 2
3. Parts list and Specifications ......................................................................................................................... 3
4. Installation ...................................................................................................................................................... 4
5. Operation ........................................................................................................................................................ 6
5.1. Extending Rods .........................................................................................................................................................6
5.2. Retracting Rods .........................................................................................................................................................6
5.3. Removing Rods .........................................................................................................................................................6

2
1. INTRODUCTION
This user manual is specific to the Weblazer™ bicycle attachment. It contains important safety, technical, installation, and operation
information you should read and follow before your first use of this product. Retain a copy of this user manual for reference. An additional
copy may be obtained from www.deepeastsupply.com.
When reading this user manual, notice the various important symbols and safety signs which are explained below:
WARNING!
The combination of this symbol and word indicates a potentially hazardous situation which, if not avoided, may
result in serious injury or death.
CAUTION!
The combination of this symbol and word indicates a potentially hazardous situation which, if not avoided, may
result in minor or moderate injury or serious damage to equipment.
INFO
This symbol alerts the user to information which is particularly important.
1.1. INTENDED USE
The Weblazer™ is intended to clear spider webs from a trail under casual to moderate riding conditions. They are NOT intended for downhill
or other forms of extreme riding conditions.
2. GENERAL WARNINGS
Like any sport, bicycling involves risk of injury and damage. By choosing to ride a bicycle, with or without any attachments, you assume the
responsibility for that risk, so you need to know and practice safe and responsible riding with proper use.
Many of the Warnings and Cautions say “you may lose control and fall”. Because any fall can result in serious injury or even death, we do
not always repeat the warning of possible injury or death.
Because it is impossible to anticipate every situation or condition which can occur while riding, this user manual makes no representation
about the safe use of bicycles, and any attachments, under all conditions. There are risks associated with the use of any bicycle, and any
attachment, which cannot be predicted or avoided, and which are the sole responsibility of the rider.
CAUTION!
Never modify the components in any way. Doing so may result in minor or moderate injury or serious damage to
equipment.
CAUTION!
The Weblazer™ rods are long and pointed. Exercise caution when determining riding intensity.
INFO
Follow the order of operations as outlined in this user manual for the most efficient installation.

3
3. PARTS LIST AND SPECIFICATIONS
Item
QTY Per Kit
Weight (g)
L / W (mm)
Adapter and Rod Section
x2
56 /ea
[~1540 / ~480] / ~32
1. ¼ Turn Fastener
x2
2. Retaining Spring
X2
3. Adapter and Telescopic Rod
[Extended/Collapsed]
x2
4. Retainer Ring
x2
Fork Mount Section
x2
34 /ea
~76 / ~38
5. Fork Mount
x2
6. Receptacle
x2
7. Screws
x4
8. Silicon Pad
x4
9. Cable Tie
x4
3 /ea
Total:
-
~192g
1
1
2
3
4
5
6
9
8
7

4
4. INSTALLATION
1. Choose the vertical mounting location on the bicycle front fork where each Fork Mount will attach.
2. Decide orientation of Fork Mounts to achieve as close to a 5° forward shifted angle as possible as shown in Figure 2. Test the fit
of different angles by first attaching the rods (See Step 6 below) while adhering to the below installation guidance.
CAUTION!
Having too forward of an angle could result in the telescopic rods catching obstacles and being damaged.
INFO
The Fork Mounts are fit with an odd number of teeth, as shown in Figures 3and 4, thereby enabling users more
flexibility to achieve the optimum angle.
3. Clean the area on the bicycle front fork under where each Fork Mount will attach.
4. Clean the back silicon pads of each Fork Mount prior to installation as shown in Figure 5.
INFO
Failing to clean the pads on the Fork Mount, or where it will attach, may result in undesired movement of the
Fork Mount.
2
5° ANGLE
3
4
5

5
5. One by one, place each Fork Mount on either side of the front fork while making sure they are aligned across the fork as diagramed
in Figure 6.
6. Route Cable Ties around the fork and Fork Mount, in each Cable Tie groove displayed in Figure 7, ensuring the Cable Ties route
under any electric cables or other accessories.
CAUTION!
Improper routing of the Cable Ties could result in potential damage to other components on the front fork.
7. Attach the Adapter and Telescopic Rod to the Fork Mount by aligning the teeth and turning the ¼ Turn Fastener to the right
until you feel a ‘click’ as shown in Figure 8.
CAUTION!
Not fully turning and locking the ¼ Turn Fastener could result in the product falling off and getting damaged.
6
7
8

6
5. OPERATION
5.1. EXTENDING RODS
1. Take hold of the tip and, with control, pull the end out until telescopic rod is fully extended. Grab each section, starting with the
second to largest, and pull tight to ensure each part is snug.
5.2. RETRACTING RODS
1. Hold the second to last (second to smallest) section of the telescopic rod and begin, with control, compressing the telescopic rod
back down into the larger sections. Ensure the end cap is fully inserted in the largest section.
CAUTION!
The last (smallest) section is thin and can damage easily if too much force is applied. Take hold of this last
section, nearest the next largest section, and compress from there to reduce risk of damage.
5.3. REMOVING RODS
1. Turn the ¼ Turn Fastener to the left and then pull the Adapter and Telescopic Rod off.
Table of contents