
Thank you for purchasing Bubble – the automatic dog water
fountain. Please read this manual carefully before use.
FAQ
Tips:
All of the above mentioned are DEIN DOG Team explanations
depending on the actual usage. When the product is used by dog
breeds such as English Bulldogs, Chow Chows and other dogs
with more saliva who also drink more often, the water needs to
be changed /refilled more often and tank cleaned on time.
Detach the power before cleaning, then use cold water or mild
sponge with neutral detergent (no alcohol, bleach or any other
hard cleansing product) to clean the tank. Clean the charcoal
filter separately only with cold water.
Q: How often do I need to change the water?
A: Once a week. Make sure the water pump and the
dispenser are free of hair and dirt.
Q: How often do I need to change the charcoal filter?
A: Every 30 to 45 days.
Q: Does this product use lots of electricity?
A: It uses approximately 18 kW-h in a year, equal to less
then 5,- Euros of electricity bill.
Daily Cleaning and Maintenance
Silent water pump
Product Name: Bubble – the automatic dog fountain
Product Accessories: Water fountain, 2 Charcoal Filters,
Sponge, Silent water pump, black USB Cable and black Plug.
Material: ABS, PP (BPA free)
Tank Volume: 2,5L
Product Size: 200 x 200 x 153 mm
Product Weight: 1020g
Product Colors: Pastel Pink, Pure White
Technical Details:
Output Voltage: DC 5V 150 mA
Rated Power: 1,5W
Cable Length: 155 cm
OPERATION GUIDE
Product details
WARNING! Please make sure you add always water above
the red scale line. If the water level is lower than the red scale
line, the water pump will make noises and burn dry.
Please keep the water tank indoor and horizontally.
Please make sure you install every accessories in right place.
Do not allow your Dog to chew the wire or dismantle the equipment.
Please cut off the power before cleaning.
Keep away from children.
Except the human-made damages, the silent water pump
enjoys a one-year warrenty.
Top cover
Spout
Charcoal filter
Filter tray
Water tank
Red tick mark
Silent water pump
Sponge
Output pipe
Water level window
①Take out the water storage tank
③Plug the outlet pipe into silent water
pump as shown
② Install the silent water pump as shown
④Insert the filter sponge into the buckle
as shown
⑤Cover the filter tray
⑥ Add filter element
⑦ Put in the spout
⑧Put on the top cover
⑨Completed
NOTE:
Do not continue filling above
the signed level on water
window.Keep the water level
above the minimal tick mark
to prevent dry burn.
Important
Part Names
Installation Steps
INSTALLATION METHOD
Vielen Dank für deine felltastische Bestellung bei DEIN DOG.
Bei Fragen, Wünschen und Anregungen sind wir für dich da,
Pfote drauf!
Thank you for your pawsome order by DEIN DOG.
For questions, feedbacks and comments we stay gladly on
disposal! We´d love to hear from you - with a text or a WOOF :)
DEIN DOG Team