SPECIFICATION LINE: HEATED ROLL-THRU
Project __________________________
Item ____________________________
Quantity _________________________
CSI Section 11400
Specification Line
Heated Roll-Thru
980 S. Isabella Road
Mt. Pleasant, MI 48858
www.delfield.com
Phone: 800-733-8948
Fax: 800-669-0619
Email: info@delfield.com
Approval _________________
Date ____________________
SSHRT2-S
SPECIFICATIONS
Exterior: Cabinet exterior sides, front and shroud
shall be 22-gauge, corrosion resistant stainless steel.
Upper shroud shall be hinged, with stay-open feature
to provide easy access to the system.
Interior: Cabinet interior shall be 22-gauge, corrosion
resistant stainless steel (SS models) or heavy gauge
aluminum (SA models). Bottom and top surfaces are
die stamped to provide radius corners and recessed
floor.Interior light mounted to the interior ceiling is
controlled automatically through a switch mounted in
the hinge assembly to protect against breakage. Door
openings are protected with heavy gauge stainless
steel breaker strips. An air duct is mounted to the
ceiling assuring low velocity, even air movement
throughout the cabinet interior.
Glass Doors: Double paned tempered thermopane
glass. Constructed with a combination of extruded
aluminum and PVC. Each door has two edgemount,
self-closing, cam lift style hinges. Doors can be removed
from the cabinet without the use of tools. Door handle
is continuous along vertical dimension of the door. Door
gaskets are magnetic and mount to the door, snapping in
place and removable with out tools. Keyed door lock is
mounted to the door. Lock is mounted to the door. Lock
engages into a heavy duty strike mounted to the cabinet
face.
Solid Doors: Exterior shall be 22-gauge, corrosion
resistant stainless steel. Interior liner shall be stainless
steel, formed to protrude beyond the door gasket to protect
the gasket from tearing. Each door has two edge mount,
self closing, cam lift style hinges. Doors can be removed
from cabinet without the use of tools. Metal door handle is
recessed into the door for easy grip without impacting aisle
space. Keyed door lock is mounted in the door next to the
handle. Lock engages into a heavy duty strike mounted
to the cabinet face. Door gaskets are magnetic and
mount to the door snapping in place and are removable
without tools.
Heating system: Cabinets are designed to maintain
temperatures between 120˚F and 200˚F. Heating
elements are helical shaped, with tubular fins. High
speed blower provides uniform airflow in the cabinet.
Entire heating system is mounted to the exterior of the
cabinet ceiling, outside the food zone. It is assembled
as one piece and can be removed as one piece.
Temperature is controlled by an adjustable electronic
thermostat. System on/off switch is located on the front
exterior of the cabinet.
Electrical: Standard electrical is 120/208-240 volt,
60Hz, single phase. Connection must be hard wired to
junction box on exterior top of the cabinet.
MODELS
❑ SSHRT1-S 1 section stainless interior
solid full height door
❑ SAHRT1-S 1 section aluminum interior
solid full height door
❑ SSHRT2-S 2 section stainless interior
solid full height door
❑ SAHRT2-S 2 section aluminum interior
solid full height door
❑ SSHRT3-S 3 section stainless interior
solid full height door
❑ SAHRT3-S 3 section aluminum interior
solid full height door
STANDARD FEATURES
• Stainless steel interior and exterior (SS)
• Stainless steel exterior, aluminum interior (SA)
• Built in door locks with heavy duty strikes
• Recessed metal door handle
• Exterior Digital thermometer
• Easy to use electronic control
• Easy access “flip up” shroud
• Tough ABS interior door liners
• 6” adjustable stainless steel legs
• Stainless steel breaker strips
• Energy savings door heater switch
• Incline stainless steel ramp
• Two year parts & labor warranty
OPTIONS AND ACCESSORIES
❑ Laminate on front, sides and back
❑ Full height shelf kit
❑ Half height shelf kit
❑ Heat shield end
❑ Stainless steel kick plate
❑ 220-50-1 electrical
❑ Flat exterior ramp
