Short Form Specifications
Exterior top is constructed of one-piece 16-gauge stainless steel, with
integral 2.12" (5.4cm) high square nosing at the front, and 4" (10.2cm)
high by 2" (5.1cm) deep backsplash at the rear. Top is insulated with 2"
(5.1cm) of high-density insulation.
Exterior back and bottom are 24-gauge galvanized steel. Exterior ends
are 18-gauge galvanized steel.
Base interior has 22-gauge stainless steel back and bottom. Interior
ends and door frames are thermoformed ABS plastic. Base is insulated
with 1.5" (3.8cm) of high-density foamed-in-place polyurethane.
Door(s) have a 22-gauge stainless steel exterior front, with a thermo-
formed ABS plastic interior liner. Door(s) have black recessed
handle(s) and a snap-in magnetic gasket which is easily replaceable.
Each interior door section has (1) removable epoxy-coated wire shelf.
Base has a machine compartment, standard on right, with a condensing
unit with condensate evaporator and an electrical junction box installed.
Machine compartment has a removable louver for access to condensing
unit. Blower coil(s) are located behind the door mullions. Refrigeration
system uses HFC-404A refrigerant, and will maintain 36°F (2°C) to
40°F (4°C) interior cabinet temperature.
Unit is mounted on 6.13" (15.6cm) high adjustable stainless steel legs.
Electrical connections are 115 volts, 60 Hertz, single phase. Unit has
a 8' (2.4m) long cord and plug.
Optional Accessories & Modifications
906A Stainless steel end
505H Stainless steel back
505F Laminate facing (full front)
906E Laminate end
905A Laminate back
1030A Cutting board (Sanalite or composite)
107F Tray rack
1027A Casters
102 Drawers
A-(2) 19” in lieu of one door
B-(2) 27” in lieu of one door
C-(2) 32” in lieu of one door
E-(3) 19”, 27” or 32” in lieu of one door
108 Locks
213 *220V/50 cycle
*Inclusion of this option will alter the
electrical specifications of the unit
Model F18WC78
31.5”(80cm)DeepSelf-ContainedRefrigeratedWorkTables
The Delfield Company, P.O. Box 470, Mt Pleasant, MI 48804-0470, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • www.delfield.com
Delfield reserves the right to make changes in design or specifications without prior notice. ©2001 The Delfield Company. All rights reserved. Printed in U.S.A.
PROJECT
ITEM #
QUANTITY DATE
APPROVAL
F18WC
