
 
Product Safety, EMC & Environmental Datasheet 
Page 6 
 
X. PACKAGING
 
 
No CFCs (chlorofluorocarbons), HCFCs (hydrofluorocarbons) or other ozone depleting substances are used in packaging 
material. Chromium, lead, mercury, or cadmium are not intentionally added to packaging materials and are not present in a 
cumulative concentration greater than 100 ppm as incidental impurities. No halogenated plastics or polymers are used for 
packaging material. Dell complies with the EU Directive 94/62/EEC. 
 
Packaging Materials Weight, kg 
AIO Carton 1.4 
AIO Accessory box 0.275 
Paper card-1(for USB) in Accessory box 0.008 
EPE Cushion 0.37 
EPE Cushion for Bottom 0.16 
EPE PE-Bag 0.3 
 
 Printed user documentation is bleached in a chlorine-free process. (Europe Only) 
 
XI. BATTERIES
 
 
Batteries in this product are not based on mercury, lead or cadmium technologies. The batteries used in this product are in 
compliance with EU Directive 91/ 157/ EEC, EU Directive 93/ 86/ EEC, EU Directive 98/ 101/ EEC, and EU Battery Directive 
2006/66/EC. 
 
The product documentation includes instructional information on the proper removal and disposal of the batteries used in this 
product. Below is a listing of batteries present in the product: 
 
Battery Description – Internal Batteries Battery Type 
3-V CR2032 coin cell Lithium / Manganese Dioxide cell 
 
XII. DESIGN FOR ENVIRONMENT 
 
 Longevity and Upgrading 
Dell systems are, when applicable, designed for easy assembly, disassembly, and servicing. To extend the life of your system, 
you can install or upgrade certain system components (e.g., microprocessor, memory, expansion cards, and storage devices). 
Spare parts are available after the end of production for up to five years, or otherwise through the warranty period. 
 
Recyclability 
For recyclability, this system incorporates the following design guidelines: 
EU WEEE mark is applied to products sold in Europe, EU recycling information can be found at www.euro.dell.com/recycling 
Minimal use of non-separable connections, such as gluing and welding between different materials. 
Mechanical plastic parts greater than 100 grams consist of one material or of easily separable materials.