Dell Latitude E5530 User manual

Dell Latitude E5530
Owner's Manual
Regulatory Model: P28G
Regulatory Type: P28G001

Contents
Notes, Cautions, and Warnings.............................................................................................. 0
1 Working on Your Computer.......................................................................................................5
Before Working Inside Your Computer.....................................................................................................................5
Turning Off Your Computer.......................................................................................................................................6
After Working Inside Your Computer........................................................................................................................6
2 Removing and Installing Components.....................................................................................7
Recommended Tools................................................................................................................................................7
Removing the SD Memory Card................................................................................................................................7
Installing the SD Memory Card.................................................................................................................................7
Removing the Battery...............................................................................................................................................7
Installing the Battery................................................................................................................................................8
Removing the Subscriber Identity Module (SIM) Card.............................................................................................8
Installing the Subscriber Identity Module (SIM) Card..............................................................................................9
Removing the Display Bezel.....................................................................................................................................9
Installing the Display Bezel.....................................................................................................................................10
Removing the Camera.............................................................................................................................................10
Installing the Camera..............................................................................................................................................10
Removing the Display Panel...................................................................................................................................10
Installing the Display Panel....................................................................................................................................12
Removing the Keyboard Trim..................................................................................................................................13
Installing the Keyboard Trim...................................................................................................................................14
Removing the Keyboard..........................................................................................................................................14
Installing the Keyboard...........................................................................................................................................17
Removing the Bottom Door.....................................................................................................................................18
Installing the Bottom Door......................................................................................................................................19
Removing the Optical Drive....................................................................................................................................19
Installing the Optical Drive.....................................................................................................................................21
Removing The Hard Drive.......................................................................................................................................21
Installing the Hard Drive.........................................................................................................................................23
Removing the Wireless Local Area Network (WLAN) Card...................................................................................24
Installing the Wireless Local Area Network (WLAN) Card....................................................................................24
Removing the Memory Module..............................................................................................................................24
Installing the Memory Module................................................................................................................................24
Removing the Processor Door................................................................................................................................25

Installing the Processor Door.................................................................................................................................25
Removing the Thermal Module...............................................................................................................................26
Installing the Thermal Module................................................................................................................................27
Removing the Processor.........................................................................................................................................27
Installing the Processor..........................................................................................................................................27
Removing the Palmrest...........................................................................................................................................27
Installing the Palmrest............................................................................................................................................30
Removing the ExpressCard Reader Cage...............................................................................................................30
Installing the ExpressCard Reader Cage................................................................................................................31
Removing the Bluetooth Module............................................................................................................................31
Installing the Bluetooth module..............................................................................................................................32
Removing the Audio Board.....................................................................................................................................32
Installing the Audio Board......................................................................................................................................33
Removing the Display Assembly.............................................................................................................................33
Installing the Display Assembly..............................................................................................................................36
Removing the Right Support Frame........................................................................................................................36
Installing the Right Support Frame.........................................................................................................................37
Removing the Modem Card....................................................................................................................................37
Installing the Modem Card.....................................................................................................................................38
Removing the Left Support Frame..........................................................................................................................38
Installing the Left Support Frame............................................................................................................................39
Removing the System Board...................................................................................................................................39
Installing the System Board....................................................................................................................................42
Removing the Coin-Cell Battery..............................................................................................................................43
Installing the Coin-Cell Battery...............................................................................................................................43
Removing the Input/Output (I/O) Board..................................................................................................................44
Installing the Input/Output (I/O) Board...................................................................................................................44
Removing the Power Connector.............................................................................................................................45
Installing the Power Connector..............................................................................................................................46
Removing the System Fan.......................................................................................................................................46
Installing the System Fan........................................................................................................................................48
Removing the Network Connector..........................................................................................................................48
Installing the Network Connector Jack..................................................................................................................49
Removing the Speakers..........................................................................................................................................49
Installing the Speakers...........................................................................................................................................50
3 Docking Port Information.........................................................................................................53
4 Specifications............................................................................................................................55
Specifications.........................................................................................................................................................55
5 System Setup.............................................................................................................................61

Overview ................................................................................................................................................................61
Entering System Setup............................................................................................................................................61
System Setup Options.............................................................................................................................................61
6 Diagnostics.................................................................................................................................69
Diagnostics.............................................................................................................................................................69
Device Status LightsBattery Status LightsKeyboard Status Lights..................................................................69
7 Contacting Dell..........................................................................................................................71
Contacting Dell.......................................................................................................................................................71

Working on Your Computer
Before Working Inside Your Computer
Use the following safety guidelines to help protect your computer from potential damage and to help to ensure your
personal safety. Unless otherwise noted, each procedure included in this document assumes that the following
conditions exist:
• You have read the safety information that shipped with your computer.
• A component can be replaced or--if purchased separately--installed by performing the removal procedure in
reverse order.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For
additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/
regulatory_compliance
CAUTION: Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your
warranty. Read and follow the safety instructions that came with the product.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically
touching an unpainted metal surface, such as a connector on the back of the computer.
CAUTION: Handle components and cards with care. Do not touch the components or contacts on a card. Hold a
card by its edges or by its metal mounting bracket. Hold a component such as a processor by its edges, not by its
pins.
CAUTION: When you disconnect a cable, pull on its connector or on its pull-tab, not on the cable itself. Some
cables have connectors with locking tabs; if you are disconnecting this type of cable, press in on the locking tabs
before you disconnect the cable. As you pull connectors apart, keep them evenly aligned to avoid bending any
connector pins. Also, before you connect a cable, ensure that both connectors are correctly oriented and aligned.
NOTE: The color of your computer and certain components may appear differently than shown in this document.
To avoid damaging your computer, perform the following steps before you begin working inside the computer.
1. Ensure that your work surface is flat and clean to prevent the computer cover from being scratched.
2. Turn off your computer (see Turning Off Your Computer).
CAUTION: To disconnect a network cable, first unplug the cable from your computer and then unplug the cable
from the network device.
3. Disconnect all network cables from the computer.
4. Disconnect your computer and all attached devices from their electrical outlets.
5. Press and hold the power button while the computer is unplugged to ground the system board.
6. Remove the cover.
CAUTION: Before touching anything inside your computer, ground yourself by touching an unpainted metal
surface, such as the metal at the back of the computer. While you work, periodically touch an unpainted metal
surface to dissipate static electricity, which could harm internal components.
5

Turning Off Your Computer
CAUTION: To avoid losing data, save and close all open files and exit all open programs before you turn off your
computer.
1. Shut down the operating system:
– In Windows 7:
Click Start , then click Shut Down.
– In Windows Vista:
Click Start , then click the arrow in the lower-right corner of the Start menu as shown below, and then
click Shut Down.
– In Windows XP:
Click Start → Turn Off Computer → Turn Off . The computer turns off after the operating system shutdown
process is complete.
2. Ensure that the computer and all attached devices are turned off. If your computer and attached devices did not
automatically turn off when you shut down your operating system, press and hold the power button for about 6
seconds to turn them off.
After Working Inside Your Computer
After you complete any replacement procedure, ensure you connect any external devices, cards, and cables before
turning on your computer.
1. Replace the cover.
CAUTION: To connect a network cable, first plug the cable into the network device and then plug it into the
computer.
2. Connect any telephone or network cables to your computer.
3. Connect your computer and all attached devices to their electrical outlets.
4. Turn on your computer.
5. If required, verify that the computer works correctly by running the Dell Diagnostics.
6

Removing and Installing Components
This section provides detailed information on how to remove or install the components from your computer.
Recommended Tools
The procedures in this document may require the following tools:
• Small flat-blade screwdriver
• Phillips screwdriver
• Small plastic scribe
Removing the SD Memory Card
1. Follow the procedures in Before Working Inside Your Computer .
2. Press in on the SD memory card to release it from the computer.
3. Slide the SD memory card out of the computer.
Installing the SD Memory Card
1. Push the memory card into the compartment until it clicks into place.
2. Follow the procedures in After Working Inside Your Computer .
Removing the Battery
1. Follow the procedures in Before Working Inside Your Computer .
2. Slide the battery release latches into the unlock position.
7

Figure 1.
3. Remove the battery from the computer.
Figure 2.
Installing the Battery
1. Slide the battery into its slot until it clicks into place.
2. Follow the procedures in After Working Inside Your Computer .
Removing the Subscriber Identity Module (SIM) Card
1. Follow the procedures in Before Working Inside Your Computer .
2. Remove the battery.
3. Press and release the SIM card located on the battery wall.
8

4. Slide the SIM card from the computer.
Installing the Subscriber Identity Module (SIM) Card
1. Insert the subscriber identity module (SIM) card into the slot.
2. Install the battery.
3. Follow the procedures in After Working Inside Your Computer .
Removing the Display Bezel
1. Follow the procedures in Before Working Inside Your Computer .
2. Remove the battery.
3. Pry up the bottom edge of the display bezel.
4. Work your way around the sides and top edge of the display bezel. .
Figure 3.
5. Remove the display bezel from the computer .
9

Installing the Display Bezel
1. Place the display bezel onto the display assembly.
2. Starting from the top corner, press on the display bezel and work around the entire bezel until it snaps onto the
display assembly.
3. Install the battery.
4. Follow the procedures in After Working Inside Your Computer .
Removing the Camera
1. Follow the procedures in Before Working Inside Your Computer .
2. Remove:
a) battery
b) display bezel
3. Disconnect the camera cable.
4. Remove the screw that secures the camera and microphone module.
5. Lift and remove the camera and microphone module.
Installing the Camera
1. Place the camera and microphone module in position on the display bezel.
2. Tighten the screw that secures the camera and microphone module.
3. Connect the camera cable.
4. Install:
a) display bezel
b) battery
5. Follow the procedures in After Working Inside Your Computer .
Removing the Display Panel
1. Follow the procedures in Before Working Inside Your Computer .
2. Remove:
a) battery
b) display bezel
3. Remove the screws that secure the display panel.
10

Figure 4.
4. Flip the display panel over.
Figure 5.
5. Lift the Mylar tape and disconnect the LVDS cable from the back of the display panel.
11

Figure 6.
6. Remove the display panel from the display assembly.
Figure 7.
Installing the Display Panel
1. Install the screws that secure the display brackets to the display panel.
2. Attach the display panel to the display assembly.
3. Align the display panel in its original position in the computer.
4. Connect the low-voltage differential signaling (LVDS) cable to the display panel and attach the tape.
5. Flip the display panel over and install the screws that secure the display panel.
6. Install the display bezel.
7. Install the battery.
12

8. Follow the procedures in After Working Inside Your Computer .
Removing the Keyboard Trim
1. Follow the procedures in Before Working Inside Your Computer .
2. Remove the battery.
3. Remove the screws at the back of the computer.
4. Pry up the keyboard trim starting from the bottom edge.
5. Work your way around the sides and the top edge of the keyboard trim.
6. Lift upwards and remove the keyboard trim from the computer.
13

Installing the Keyboard Trim
1. Align the keyboard trim to its compartment.
2. Press along the sides of the keyboard trim until it snaps in place.
3. Install the battery.
4. Follow the procedures in After Working Inside Your Computer .
Removing the Keyboard
1. Follow the procedures in Before Working Inside Your Computer .
2. Remove:
a) battery
b) keyboard trim
3. Remove the screw at the back of the computer.
14

Figure 8.
4. Lift the clip to release the keyboard trim from the computer .
Figure 9.
5. Remove the keyboard trim from the computer .
15

Figure 10.
6. Remove the screws that secure the keyboard in place.
Figure 11.
7. Flip the keyboard over.
16

Figure 12.
8. Peel off the adhesive tape securing the keyboard flat flex cable to the back of the keyboard.
9. Disconnect the keyboard flat flex cable.
10. Peel away the keyboard flat flex cable from the keyboard and remove it from the computer.
Figure 13.
Installing the Keyboard
1. Attach the keyboard flat flex cable to the keyboard.
2. Affix the adhesive tape securing the keyboard flat flex cable to the keyboard.
3. Slide the keyboard into its compartment until all the metal tabs fit into their positions.
4. Fasten the keyboard cable clip.
17

5. Press down on the keyboard to the left and right side ensuring that all the snaps are fully engaged with the
computer.
6. Install the screws that secure the keyboard to the palm rest.
7. Install the screw at the back of the computer.
8. Install :
a) keyboard trim
b) battery
9. Follow the procedures in After Working Inside Your Computer .
Removing the Bottom Door
1. Follow the procedures in Before Working Inside Your Computer .
2. Remove the battery.
3. Remove the screws that secure the bottom door.
Figure 14.
4. Slide and then lift the bottom door upwards and remove it from the computer.
18

Figure 15.
Installing the Bottom Door
1. Slide the bottom door into its slot until it clicks into place.
2. Install the screws that secure the bottom door to the computer.
3. Install the battery.
4. Follow the procedures in After Working Inside Your Computer .
Removing the Optical Drive
1. Follow the procedures in Before Working Inside Your Computer .
2. Remove:
a) battery
b) bottom door
3. Remove the screw that secures the optical drive.
19

Figure 16.
4. Push the screw tab away from the computer to release the optical drive from the drive bay.
Figure 17.
5. Remove the optical drive from the computer.
20