Dell Vostro 1400 Assembly instructions







This document describes how to install the ATI Rage XL video drivers for the Microsoft®
Windows NT®Server 4.0 and Windows®2000 Server operating systems. Once your system’s operat-
ing system is installed, you should install the video drivers by performing the following steps:
1. With the system running, insert the ATI Rage XL video driver CD in the system’s CD-ROM drive.
If your system has the Autorun feature enabled, the CD will automatically load the installation
program.
If your system does not have Autorun enabled, continue the installation process by selecting
the readme.exe file from the list of files on the CD.
2. Instructions for installing the video drivers are displayed.
To install the video drivers, follow the procedure for your particular operating system.
____________________
Information in this document is subject to change without notice.
© 2000 Dell Computer Corporation. All rights reserved. Printed in the U.S.A.
Trademarks used in this text: Dell, the DELL E COM logo, and PowerEdge are trademarks of Dell Computer
Corporation; Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation. Other
trademarks and trade names may be used in this document to refer to either the entities claiming the marks and
names or their products. Dell Computer Corporation disclaims any proprietary interest in trademarks and trade
names other than its own.