Dell PowerEdge UPS 500T User manual

DellMultiUPSManagementConsole
UserGuide



















Dell.com


DellMUMC–UserGuide
P164000119Rev0.03

TABLEOFCONTENTS
i

TABLEOFCONTENTS
1. INTRODUCTION ................................................................................................................................................1
2. INSTALLATION ..................................................................................................................................................1
2.1. InstallationPrerequisites................................................................................................................... 1
2.1.1. OntheSystemHosting«DellMultiUPSManagementConsole».................................................... 1
2.1.2. OntheSystemthatDisplaysWebbasedGraphicalUserInterface .................................................. 1
2.2. QuickStart&Installation .................................................................................................................. 2
2.3. InstallationResult.............................................................................................................................. 4
2.4. UninstallingtheProduct.................................................................................................................... 5
2.5. UpgradingtheProduct ...................................................................................................................... 5
3. CONFIGURATION..............................................................................................................................................5
3.1. ConfiguretheNodes.......................................................................................................................... 5
3.2. DellMultiUPSManagementConsoleSettings..................................................................................6
3.2.1. DiscoverthenodesConnectedontheNetwork ...............................................................................6
3.2.2. ConfigureActions .............................................................................................................................. 7
3.2.3. ConfigureUserAccounts................................................................................................................. 10
3.2.4. Systemsettings................................................................................................................................ 11
4. SUPERVISION..................................................................................................................................................11
4.1. Accesstothemonitoringinterface ................................................................................................. 11
4.1.1. Localaccess ..................................................................................................................................... 11
4.1.2. Remoteaccess................................................................................................................................. 11
4.2. NodeListview ................................................................................................................................. 12
4.3. FlexiblePanelsview......................................................................................................................... 14
4.4. Panelslist......................................................................................................................................... 14
4.4.1. Information ..................................................................................................................................... 14
4.4.2. Status............................................................................................................................................... 15
4.4.3. Measures......................................................................................................................................... 16
4.4.4. Environment.................................................................................................................................... 16
4.4.5. Graph............................................................................................................................................... 16
4.4.6. Synoptic........................................................................................................................................... 17
4.4.7. PowerSource .................................................................................................................................. 18
4.4.8. Poweredapplications...................................................................................................................... 19
4.4.9. Events .............................................................................................................................................. 19
4.4.10. Statistics .......................................................................................................................................... 19

TABLEOFCONTENTS



DellMUMC–UserGuide
P164000119Rev0.03
TABLEOFCONTENTS
ii

4.5. ApplicationsListView...................................................................................................................... 20
4.6. MapView ........................................................................................................................................ 21
4.6.1. CreateacustomizedMapView....................................................................................................... 21
4.6.2. Mapsexamples................................................................................................................................ 22
4.7. Events .............................................................................................................................................. 23
4.7.1. Listrepresentation .......................................................................................................................... 23
4.7.2. Calendarrepresentation ................................................................................................................. 24
4.7.3. NodesEventslist ............................................................................................................................. 25
4.8. LaunchingDeviceorapplicationWebinterface.............................................................................. 26
4.9. Definingsubviews........................................................................................................................... 27
4.10. Sharingsubviews ............................................................................................................................ 28
5. SHUTDOWN....................................................................................................................................................29
5.1. Introduction..................................................................................................................................... 29
5.2. ShutdownConfiguration ................................................................................................................. 29
5.3. PowerSourceView.......................................................................................................................... 31
5.4. ShutdownSequence........................................................................................................................ 32
6. ADVANCEDMANAGEMENT............................................................................................................................32
6.1. NodesSettings................................................................................................................................. 32
6.1.1. SinglenodeConfigurationDisplay................................................................................................... 32
6.1.2. SingleCardsettings ......................................................................................................................... 33
6.1.3. MultipleCardsConfigurationsSynchronisation.............................................................................. 33
6.2. NodesUpgrade................................................................................................................................ 34
6.2.1. UploadDeviceFirmware ................................................................................................................. 34
6.2.2. Upgradeapplications ...................................................................................................................... 36
7. VIRTUALIZATIONMODULE.............................................................................................................................36
7.1. Introduction..................................................................................................................................... 36
7.2. DellMultiUPSManagementConsoleVirtualizationconfigurationsforVMwareandMicrosoft... 37
7.3. Testedenvironments ...................................................................................................................... 38
7.3.1. VMware........................................................................................................................................... 38
7.3.2. Microsoft ......................................................................................................................................... 39
7.4. EnablingtheVirtualizationModule................................................................................................. 39
7.5. VMwareSupervisorsPrerequisites ................................................................................................. 39
7.6. MicrosoftSupervisorsPrerequisites ............................................................................................... 39
7.7. AddingavCenterServerSupervisor................................................................................................ 40
7.8. AddingaSCVMMSupervisor........................................................................................................... 41




TABLEOFCONTENTS



DellMUMC–UserGuide
P164000119Rev0.03
TABLEOFCONTENTS
iii

7.9. ConfiguringaVMHost(ESX/ESXiServerorHypervServer) ........................................................... 42
7.9.1. Firsttypeofnodes(theVMhosthasNoDELLULNM)..................................................................... 42
7.9.2. Secondtypeofnodes(DELLMUMCdetectsDELLULNMrunningontheVMHost) ....................... 43
8. COMPATIBILITYLIST .......................................................................................................................................45
8.1. DellDevices ..................................................................................................................................... 45
8.2. ApplicationsonComputers ............................................................................................................. 45
8.3. DELLSeriallineDeviceS................................................................................................................... 45
8.4. OtherDevices .................................................................................................................................. 46
8.5. Performances .................................................................................................................................. 47
9. FAQANDERRORMESSAGES ..........................................................................................................................47
10. GLOSSARY..................................................................................................................................................47
11. ACKNOwLEDGEMENTs ..............................................................................................................................48
12. APPENDIX1:ConfiguringtheMUMCvCenterPlugin................................................................................49
12.1. Introduction..................................................................................................................................... 49
12.2. CheckingthatDELLMUMCPluginisregisteredinvCenter............................................................ 49
12.3. UsingDELLMUMCthroughvCenter ............................................................................................... 49
13. APPENDIX2:ConfiguringmaintenanceMODEandvMOTIONwithvcenter ............................................50
13.1. Prerequisites.................................................................................................................................... 50
13.2. Introduction..................................................................................................................................... 50
13.3. ConceptofMaintenanceMode ...................................................................................................... 50
13.4. ConfiguringmaintenancemodebehaviorinvCenter ..................................................................... 51
13.5. ConfigurationTest........................................................................................................................... 51
14. APPENDIX3:Configuringmaintenancemodeandlivemigrationwithscvmm.........................................52
14.1. MaintenanceMode......................................................................................................................... 52
14.2. WhatisLiveMigration?................................................................................................................... 52
14.3. ConfigurationTest........................................................................................................................... 52
15. APPENDIX4:WMwarereferences ............................................................................................................53
15.1. VMwareESXconfiguration.............................................................................................................. 53
15.2. vCenterServer(VMwareSupervisor).............................................................................................. 53
15.3. vSphereSDKforPerl........................................................................................................................ 53
16. APPENDIX5:microsofthypervreferences ..............................................................................................54
16.1. MicrosoftTechNetLibrary............................................................................................................... 54
16.2. AboutMaintenanceMode .............................................................................................................. 54
16.3. Requirementsforusinglivemigration ............................................................................................ 54









DellMultiUPSManagementConsole
USERGUIDE
Dell.com


DellMUMC–UserGuide
P164000119Rev0.03


0BINTRODUCTION
1

1. INTRODUCTION

TheDellITsupervisiontooliscalled"DellMultiUPSManagementConsole"

DellMultiUPSManagementConsole:
xDiscoversandsupervisesDellUPSsconnectedtothenetwork(eitherbymeansofacardora
proxy).Forthedetailedlistofcompatiblesolutions,pleaserefertotheparagraph
(EquipmentCompatibilityList)hereafter.
xSupervisestheremoteservershostingtheDellUPSLocalNodeManagerapplication.
xProvidesadvancedmanagementfeature(massconfiguration/massupload/…)withDell
NetworkManagementcards(H910P)
xProvideslocalcomputergracefulshutdownthroughDellNetworkManagementCards.

2. INSTALLATION
2.1. INSTALLATIONPREREQUISITES
2.1.1. ONTHESYSTEMHOSTING«DELLMULTIUPSMANAGEMENTCONSOLE»

DellMultiUPSManagementConsolecanbeinstalledonWindows2000/XP/2003/Vista/2008/
Windows7

Notes:
Toavoidnetworkaccessconflicts,weadviseyouagainstinstallingtheDellMultiUPSManagement
Consoleonamachinethatalsohosts:
xDellUPSManagementSoftware
xaNetworkManagementSystem(e.g.DellManagementConsole,…)
xDellUPSLocalNodeManager
xNetworkManagementProxy


2.1.2. ONTHESYSTEMTHATDISPLAYSWEBBASEDGRAPHICALUSERINTERFACE

TheDellMultiUPSManagementConsolegraphicalinterfacecanbeaccessedremotelyusingasimple
Webbrowser.AccesstothisinterfaceissecuredthroughSSLconnection(defaultconfiguration)and
isalsosecuredthroughLogin&password.

TheDellMultiUPSManagementConsolegraphicalinterfacehasbeentestedwith:
xGoogleChrome
xMozillaFirefox3.0,3.5
xMicrosoftInternetExplorer6(*),7,8,9
(*)IE6shouldworkbuttheperformanceisnotoptimal



DellMultiUPSManagementConsole
USERGUIDE
Dell.com


DellMUMC–UserGuide
P164000119Rev0.03


1BINSTALLATION
2


2.2. QUICKSTART&INSTALLATION

Tostartin5minutes,pleaseperformthefollowingsteps:

Step1(Installation)
OnaWindows2000/XP/2003/Vista/2008/7machine,runthe“DellMultiUPSManagementConsole”
packageunderanadministratoraccount.



AWebbrowserisautomaticallydisplayed(enteradminasLogin/adminasPasswordandclickonthe
Loginbutton).




DellMultiUPSManagementConsole
USERGUIDE
Dell.com


DellMUMC–UserGuide
P164000119Rev0.03


1BINSTALLATION
3

Step2(Configuration)

Whenstarted,theapplicationautomaticallyperformsaQuickscan:
xUsingtheQuickscanoperation,youwilldiscover,throughbroadcast,withinafewseconds,
allDellUPSManagementCardorDellLocalNodeManageravailable.
xThediscoverednodesaredisplayedinSettings
Æ
AutoDiscovery
Fortheothernodes,pleaseperformthediscoverybasedonIPaddressranges(Rangescan)
xUsingtheRangeScanoperationyouwilldiscoverthenodesthatareoutsideoftheNetwork
segmentandnodesthatarenotcompatiblewiththe”Quickscan”feature.
xRefertotheCompatibilitylisttodetermineifyournodesupports“Quickscan”feature.



[Optional]
xInSettings
Æ
System
Æ
ModuleSettings,activatetheshutdownmodule
xThenintheSettings
Æ
Shutdownpage,assigntheIPaddressoftheUPSthatpowersthe
localComputer.
xIntheSettings
Æ
UserListpage,assigntheaccessrightsthrough“loginandpassword”

Step3(Operation)

TheViewsÆNodeListmenuitemallowsyoutosupervisethecurrentstateofthecompatiblepower
devices&applications(selectalineinthelistandthepanelsareupdatedwithselecteddevice
information)


DellMultiUPSManagementConsole
USERGUIDE
Dell.com


DellMUMC–UserGuide
P164000119Rev0.03


1BINSTALLATION
4



[Optional]
xTheViewsÆPowerSourcemenuitemallowsyoutosupervisethecurrentstateoftheUPS
thatpowerstheserverrunningDellMultiUPSManagementConsole
xTheEventsÆEventListviewallowsyoutoviewthedeviceevents.


2.3. INSTALLATIONRESULT

xIfyouinstallanewDellMultiUPSManagementConsoleReleasewithoutuninstallingtheold
one,youwillkeepyourdatabaseandyourproductinformation.

xAttheendoftheinstallation,thefollowingshortcutsarecreatedinthegroup:
Start
Æ
ProgramsFile
Æ
Dell
Æ
MultiUPSManagementConsole

Name Description
OpenDellMultiUPSManagementConsole Startsthemain"DellMultiUPSManagement
Console"graphicalinterface
StartDellMultiUPSManagementConsole Startstheservice
StopDellMultiUPSManagementConsole Stopstheservice
UninstallDellMultiUPSManagementConsole UninstallstheProgram


DellMultiUPSManagementConsole
USERGUIDE
Dell.com


DellMUMC–UserGuide
P164000119Rev0.03


2BCONFIGURATION
5


xAservicecalled«DellMultiUPSManagementConsole»isalsocreatedfortheDatabase
AcquisitionEngine.
ThisprogramcontinuouslypollsthestatusofDelldevicesandApplicationsconnectedonthe
network.
Thisserviceautomaticallystartsonmachinebootup.
ThisserviceprovidestheWebInterface.

xAsystraydisplaysthealarmsonthelocalcomputer.

2.4. UNINSTALLINGTHEPRODUCT

xFromtheAdd/Removeprogramsitemofthecontrolpanel,executethe"DellMultiUPS
ManagementConsoleVx.xx"package.
xYoucanalsouninstallfromtheshortcuts:
Start
Æ
ProgramsFile
Æ
Dell
Æ
MultiUPSManagementConsole
Æ
UninstallDellMulti
UPSManagementConsole.
Thiswillremovethedatabaseandthecustomfilesifyouconfirmit.

2.5. UPGRADINGTHEPRODUCT

PleaserefertotheCheckingforUpgradesParagraph.

3. CONFIGURATION

3.1. CONFIGURETHENODES




Eachnode(DellUPSManagementCard/ApplicationmusthaveavalidIP
address(oraDNSname)intherangethatyouhaveenteredforauto
discovery.
Refertothecompatibilitylist.

“DellMultiUPSManagementConsole”automaticallyreceivesthealarms
(throughnotificationorpolling)withoutspecificconfigurationonthecard,
proxies,Applications.

ForSNMPacquisition,checkthecommunityname.
DefaultcommunitynameisconfiguredinSettingsÆSystemÆDefault
CommunityName
AspecificcommunitynamecanbedefinedforeachIPrangeinSettingsÆ
AutoDiscoveryÆRangeScanÆPassword


DellMultiUPSManagementConsole
USERGUIDE
Dell.com


DellMUMC–UserGuide
P164000119Rev0.03


2BCONFIGURATION
6

3.2. DELLMULTIUPSMANAGEMENTCONSOLESETTINGS

Startthe"DellMultiUPSManagementConsole"maingraphicalinterfacefromthepreviouslycreated
shortcut,andthenclickontheSettingsmenuitem.

3.2.1. DISCOVERTHENODESCONNECTEDONTHENETWORK

FromtheSettingsÆAutoDiscoveryitem,thefollowingdiscoverymethodsareavailable:
xQuickScan(automaticallyperformedwhenapplicationstarts)
xRangeScan
xAddressScan



Notes:
xTheQuickscanrequestisaBroadcastframeon4679IANAreservedportand69standard
TFTPport.
UsingtheQuickscanoperation,youwilldiscoverthroughbroadcastwithinafewseconds:
NetworkManagementCardsH910P,
xFortheothernodes,pleaseperformthediscoverybasedonIPaddressranges(Rangescan)
UsingtheRangeScanoperationyouwilldiscoverthenodesthatareoutsideoftheNetwork
segmentandnodesthatarenotcompatiblewiththe”Quickscan”feature.
xAddressScanperformsasingleaddressscan


DellMultiUPSManagementConsole
USERGUIDE
Dell.com


DellMUMC–UserGuide
P164000119Rev0.03


2BCONFIGURATION
7


3.2.2. CONFIGUREACTIONS

Youcandefinethewayuserswillbenotifiedwhennodeeventshappen.

FromtheSettingsÆActionsitem,thefollowingchannelsareavailable:
xEmail
xExecutescript/program
xNotificationtoSystray




TheCreatenewactionbuttonwilldisplayfollowinginterface:


Note:The“*”fieldsarerequired.



DellMultiUPSManagementConsole
USERGUIDE
Dell.com


DellMUMC–UserGuide
P164000119Rev0.03


2BCONFIGURATION
8

Eventsfilter:
Youcanfiltertheemailnotificationaccordingto:
xTheeventcriticality.(Critical,Warning,Normal,CommunicationLost).
xTheeventcategory(AllEvents,Alarms,Shutdownevents,Powerevents,Measures).
xTheviewthattriggerstheevent.

NoteonEventCriticalityparameter:
Withthisparameter,youcanfilterthenotificationaccordingtotheeventlevel.Refertothe
eventlistprovidedlaterinthisdocument.Ifyouselect“Critical”asfilteryouwillnotreceivethe
associated“Normal”eventinformingthatthedevicestatuschangesfrom“Critical”to“Normal”.

Email:
ToreceiveemailsonUPSevents:
xYouhavetoindicatetheSMTPserveraddressandrecipientemailaddress.
LoginandpasswordareusedwhenSMTPserverrequestsauthentication.
Foradvanceduse:
xYoucanCustomizethesubjecte.g.ifyouuseathirdpartyserviceprovidertotranslatee
mailsintoSMS.
xYoucanspecifythatyouwanttoreceiveaconsolidationofthealarmsthatoccurredduringa
delaythatyoucanchoose(ifyouspecifynodelay,eachalarmwillgenerateanemail.With
thissettingyouwillreceivemoreemailsforthesamenumberofevents)

Executescript/program:
InordertoexecuteaprogramonUPSevents,theprogrampathwillberequired.
Notes:TheprogramisexecutedundertheSYSTEMaccount.
xIfanaction(scriptorprogram)can’tbeexecutedunderSYSTEMaccount,itisnecessaryto
modifytheexecutioncontextbeforeitcanberun.
xToallowausertorunspecifictoolsandprogramswithpermissionsthataredifferentfrom
thoseassignedtotheuser'saccountusetheWindows“RunAs”Commandwhichallowsyou
tosavethepassword(WindowsXPServicePac2andmorerecentversions).
xUsethefollowingMicrosoftcommand:
Îrunas/profile/user:<mylogin>/savecred<my_program.exe>
Onfirstexecutionapasswordisrequired;itissavedforsubsequentexecutions.

Alarmboxnotification:
Thealarmsaredisplayedonthelocalcomputerinanalarmbox.
Thestatuspartofthealarmboxisoptional(ItonlyappearsifaPowerSourcehasbeendeclaredin
theShutdownconfiguration)


DellMultiUPSManagementConsole
USERGUIDE
Dell.com


DellMUMC–UserGuide
P164000119Rev0.03


2BCONFIGURATION
9



TheSystrayprovidesaccesstothealarmbox.

IfnoPowersourcehasbeendeclared,itcanhavefollowingstates:
(black) SystraycorrectlyreceivesalarmsfromDellMultiUPSManagementConsole
(grey) CommunicationislostbetweenSystrayandDellMultiUPSManagement
Console

IfaPowersourcehasbeendeclared,itcanhavefollowingstates:



SystraycorrectlyreceivesalarmsfromDellMultiUPSManagementConsole
(ACispresentonthePowersource)

SystraycorrectlyreceivesalarmsfromDellMultiUPSManagementConsole
(ThePowerSourcerunsinbatterymode)
SystraycorrectlyreceivesalarmsfromDellMultiUPSManagementConsole
(AWarningeventoccurredonPowerSource)
SystraycorrectlyreceivesalarmsfromDellMultiUPSManagementConsole
(AcriticaleventoccurredonPowerSource)
  CommunicationwithPowersourcehasfailed

DellMultiUPSManagementConsole
USERGUIDE
Dell.com


DellMUMC–UserGuide
P164000119Rev0.03


2BCONFIGURATION
10


Advancedeventsandactionscustomization:
InDellMultiUPSManagementConsoleinstallationfolder,youcanseeaconfigs/scriptsfolder
containingasampleuserdefinedactionscript(sample_user_script.js).
Youhavethepossibilitytomodifythisscriptorcreatenewscriptsthatdefineveryspecificeventsand
actions.Thesamplescriptprovidesdetailsabouttheexpectedstructureandsyntaxfordefiningnew
actionsandtriggers.


3.2.3. CONFIGUREUSERACCOUNTS

Multipleuseraccountscanbeconfigured.
FromtheSettingsmenuItem,selecttheUserListitem,thenperformthefollowingsteps:
xClickonAdduser.
xEntertheUserLoginandtheUserpassword.
xSelecttheUser’sProfilelevel.Thefollowinglevelsareavailable:
>admin(theuserwillbeabletoaccessallthefeatures)
>user(theuserwillonlyaccessthevisualizationandisnotabletosetchangestothesystem
ornodes).
xClickonCreatenewuserbutton.



DellMultiUPSManagementConsolecontainsadefaultAdministratorprofilewith
xadminaslogin
xadminaspassword

Itisstronglyrecommendedtochangethesesettingsimmediatelyafterinstallation.



DellMultiUPSManagementConsole
USERGUIDE
Dell.com


DellMUMC–UserGuide
P164000119Rev0.03


3BSUPERVISION
11

3.2.4. SYSTEMSETTINGS




Selectoneoftheitems,andthenclickonthecorrespondingbuttonontheright:
xEditlanguageallowstheusertochangetheuserlanguage.
xEditcommunitynamechangesthedefaultSNMPcommunitynamefordiscovery.
xModulessettingswillEnable/DisabletheoptionalmodulesManagement,Shutdownor
Virtualization).

4. SUPERVISION

4.1. ACCESSTOTHEMONITORINGINTERFACE

TomonitorDelldevicesalreadydiscoveredonthenetwork,startthemain“DellMultiUPS
ManagementConsole”interface.Youcanaccessthesameinterfacelocallyorremotely.
4.1.1. LOCALACCESS

xFromthesystemwherethesupervisorisinstalled,youcanusethefollowingshortcut:
StartÆProgramsFileÆDellÆMultiUPSManagementConsoleÆOpenDellMultiUPS
ManagementConsole

4.1.2. REMOTEACCESS

xFromaremotemachine,youcantypethefollowingURLinaWebbrowser
https://<nameorIPaddressofcomputerhostingDELLMUMC>:4680/
or
http://<nameorIPaddressofcomputerhostingDELLMUMC>:4679/

DellMultiUPSManagementConsole
USERGUIDE
Dell.com


DellMUMC–UserGuide
P164000119Rev0.03


3BSUPERVISION
12


xInSSLmode,acceptthecertificate(byclickingonYes)


AcceptingtheSSLCertificate

ToinstallthecertificateonIE7forVista,you
needtoperformthefollowingsteps:

>RunIEasanadministrator(Rightclickthe
desktopicon)
>VisittheDELLMUMCsite.
>Clickthroughthecertificateerror
>Clickthe"CertificateError"buttoninthe
addressbar.
>ClickViewCertificate
>ClickInstallCertificate
>Clickthe“Placeallcertificatesinthe
followingstore”radiobutton,andchoosethe
“TrustedRootCertificationAuthorities”
store.Ifyoudon’tdothis,thecertificategoes
inyourpersonalstore,anditisn’ttrustedby
IE.
>Entertheloginandpassword.

4.2. NODELISTVIEW




DellMultiUPSManagementConsole
USERGUIDE
Dell.com


DellMUMC–UserGuide
P164000119Rev0.03


3BSUPERVISION
13

Thefollowingdefaultcolumnsaredisplayedinthispage:
xType  graphicalicontodifferentiateUPSandApplications
xStatus  thisiconrepresentstheseverityofthemostcriticaleventactiveonthe
monitoreddevice
xName  theIPaddress,theDNSnameoruserdefinedname
xDescription theproductnameordescription
xLocation thenodelocation
xContact thenodecontact
xLink  linktothedeviceWebsite(ifavailable)

Note:Youcansortyourdevicelistbyclickingonthecolumntitles(Status/Name/Description/
Location/LoadLevel…).
Thefollowingpossibilitiesareavailable:
xSortascending
xSortDescending
xAddcolumns(asillustratedonfollowingscreenshot)







DellMultiUPSManagementConsole
USERGUIDE
Dell.com


DellMUMC–UserGuide
P164000119Rev0.03


3BSUPERVISION
14


4.3. FLEXIBLEPANELSVIEW

xSelectoneofthedevice/applicationsinthelistand“detailedPanels”appearsintheselection
view(ontheright).
xClickingonthebartitleallowsyoutocollapse/extendthepanel.
xThesebuttonswillallowshowing orhiding alltheviewsmenuorSelectionview
menu.
xThisbutton allowsselectingwhichpanelyouwanttoaddintheSelectionview.



Note:Someofthesepanelsareonlyavailableforspecificnodetypes.
4.4. PANELSLIST

4.4.1. INFORMATION





DellMultiUPSManagementConsole
USERGUIDE
Dell.com


DellMUMC–UserGuide
P164000119Rev0.03


3BSUPERVISION
15

Thefollowingnodeinformationisdisplayedinthispanel:
x166.99.xx.yy  theDNSname(orIPaddress)isdisplayednearthe“statusicon”
xDescription  thecommercialproductname
xNominalapparentPower thedeviceloadcapacityinVA
xIPaddress thedeviceIPaddress
xMacaddress thedeviceMACaddress
xSerialNumber thedeviceserialnumber(ifavailable)
xClass  thetypeofthecard
xLocation thedevicelocation(valueofsyslocationobjectorcanalsobeconfiguredin
theDevicepage)
xContact thedevicecontact(valueofsyscontactobjectorcanalsobeconfiguredin
theDevicepage)
xLink  linktothedeviceWebsite(ifavailable)

Note:Theinformationdisplayedinthispaneldependsonthenodecapabilities.

4.4.2. STATUS




xPowersource  ACPower/Battery
xBatterystate  charging/Discharging/Default/Floating/Resting
xLoadLevel  theoutputloadlevelofthedevice
xBatterycapacity batterycapacityofthedevice
xBatteryruntime thedeviceremainingbackuptime
xMasterOutput mainoutputstatus(ON/OFF/InternalFailure/OnAutomatic
Bypass/ManualByPass/Overload)
xOutlet#x  outputoutletstatus(ON/OFF)

Note:Theinformationdisplayedinthispaneldependsonthenodecapabilities.

Outletscolorcodes:

Symbol Color Description
Green Powered(On)
Red Notpowered(Off)


DellMultiUPSManagementConsole
USERGUIDE
Dell.com


DellMUMC–UserGuide
P164000119Rev0.03


3BSUPERVISION
16

4.4.3. MEASURES



Thispaneldisplaystheselecteddeviceelectricalparameters(singlephase)dependingonthenode
capabilities.
4.4.4. ENVIRONMENT



Thispaneldisplaystheselecteddevicesensorinformation:Temperature,Humiditylevel,Drycontact
status(Open/Closed)
xTemperature Sensortemperature(in°C)
xHumidity Humiditylevel
xInput#1 Statusoffirstcontact(open/closed)
xInput#2 Statusofsecondcontact(open/closed)
4.4.5. GRAPH



Thispaneldisplaysthegraphofthemainmeasuresoftheselecteddevice.
xThe buttonallowsyoutozoominthegraph.
xThe buttonallowsyoutoselectthedatayouwanttograph.

