dellonda Deluxe DG111 User manual

Model No. DG111
Thank you for purchasing a Dellonda product. Manufactured to a high standard, this product will,
if used according to these instructions, and properly maintained, give you years of trouble free performance.
DG111 Issue:1 29/03/21
www.dellonda.co.uk
Dellonda 30” Deluxe Traditional Style Fire
Pit, Fireplace and Outdoor Heater - Slate

About the Product
30” Deluxe re pit is perfect for socialising with family and friends providing warmth on cool
evenings. Manufactured from durable steel with a high temperature nish. Features safety mesh
screen to prevent embers and sparks ying out. Suitable for use with untreated wood and logs.
Supplied with re poker. Assembled Dimensions (W x D x H): 760 x 760 x 490mm. Some simple
assembly required.
Safety Instructions
• GENERAL SAFETY
• WARNING! The warnings, cautions and instructions in this manual cannot cover all possible conditions and situations that may occur. It must
be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be applied by the
operator.
• WARNING! For outdoor use only, never burn in vehicles, tents or indoors.
• Risk assess the area where the re pit is to be used.
• DO NOT use the re bowl to cook food, the re bowl is not designed for grilling food.
• This re bowl is intended to burn wood logs only. DO NOT use on wooden decks. DO NOT burn coal, leaves, or other combustible materials in the
re bowl.
• Add fuel gradually, a bit at a time.
• A gusty day can make a re burn more ercely, causing it to are up unexpectedly.
• DO NOT use ammable liquids to start res.
• Ensure there is a garden hose nearby, in case of emergency.
• Consider neighbours, ensure the smoke generated will not affect them.
• Keep away from combustible materials. Site away from fences, shrubs, trees, garden structures and buildings. A gusty day can make a re burn
more ercely, causing it to are up unexpectedly.
• Not for use by children. Keep children and pets away from the re bowl.
• The re bowl is hot. Use with caution. DO NOT touch the hot re bowl with bare hands.
• Never leave the burning re bowl unattended, and always extinguish the re completely.
• Ensure that the re is fully extinguished, with no hot embers, before it is left.
• DO NOT use re bowl near ammable or combustible objects or materials.
• When the re bowl is in use, the handle on the mesh screen can reach extreme temperatures that can cause serious injury to an unprotected
hand. Use a poker or an appropriate heat resistant glove or pad when handling.
• The poker handle may become hot during and after use.
• Check local re regulations and municipal by-laws for safe use.
• Check tightness of xings periodically.
Refer to
instruction
manual
Wear
Gloves
Warning:
Hot
Surface
Important Information
Please read these instructions carefully. Note the safe operational requirements, warnings & cautions. Use the product correctly and with care
for the purpose for which it is intended. Failure to do so may cause damage and/or personal injury and will invalidate the warranty. Keep these
instructions safe for future use.
No. Description. Qty.
A Handle 1
B Safety Mesh Screen Cover 1
C Wood Grate 1
D Fire Bowl 1
E Slate Top 1
F Legs 4
G Leg Support Ring 1
H Poker 1
AA M6 Nut 1
BB M6x10mm bolt 12
• Only use on level ground.
• DO NOT move whilst lit.
• WARNING Although we take every effort to ensure that the assembly
process is as easy as possible, it is inherent with fabricated steel
parts that corners and edges can cause cuts if improperly handled
during assembly procedures. Be careful whilst handling parts during
assembly. It is strongly recommended that hands are protected with a
pair of work gloves.
• Keep children and pets away from the area.
Contents
1
www.dellonda.co.uk

Assembly
Before essembly ensure there is enough space to work on the re pit, lay a sheet of card down to assemble the unit onto to avoid damage.
Step 1: Insert handle for the cover (A) into the safety mesh screen cover and secure in place with M6 nut (AA)
Step 2: Position the legs (F) onto the xing holes on the underside of the Slate Top (E) and loosely bolt on with M6 x 10mm bolts (fully tighten
after Step 3).
Step 3: Offer in the Leg Support Ring (G) as shown and loosely screw it in place with M6 x 10mm bolts, once the assembly is together and all
bolts are in position, tighten all xings.
AA
B
B
AA
AA
F
BB
E
2
www.dellonda.co.uk
BB
E
F
E
BB
F
G
GF
BB

Maintenance
• Clean with a non abrasive, non solvent based, mild detergent.
Storage
• Store in a dry place.
Environment Protection and Waste Protection and Electrical Equipment Regulations (WEEE)
Recycle unwanted packaging materials. When this product is no longer required, or has reached the end of it’s useful life, please dispose of it
in an environmentally friendly way. Drain any fluids (if applicable) into approved containers, in accordance with local waste regulations. It is our
policy to continually improve products and we reserve the right to alter data, specifications and parts without prior notice. No liability is accepted
for incorrect use of this product. Guarantee is 12 months from purchase date, proof of which is required for any claim.
Dellonda Limited
Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757575 [email protected] www.dellonda.co.uk
Once the base section is assembled carefully turn it onto it’s feet. Set into the Slate Top (E) the Fire Bowl (D) and Wood Grate (C) and nally put
in place the Safety Mesh Screen Cover (B)
B
C
D
E