Delmhorst BDX-20 User manual

BDX-20 / BDX-30
Quick Start Guide
51 Indian Lane East
Towaco, NJ 07082
877-335-6467
Support: inf[email protected]
Visit: delmhorst.com
Meter Features
• Bluetooth® app for customizing device
and exporting data*
• English, Spanish, French, German, Italian
and Russian*
• Customizable*, color-coded LED’s
• Built in material, temperature and
pin-type correction
• Adjustable alarm
• Built in calibration check
• Compatible with all existing Delmhorst
Electrodes
• Powered by 2 x AA batteries
• 2 year warranty
Delmhorst EDGE App*
Quick Start
Turn Meter On and Off
• Remove tab from inside battery compartment
• Press any key to wake meter
• Long press center button to timeout
Take a Reading
• Press Read button from any screen to enter
live reading mode
Hold a Reading
• Read button toggles between held and live
reading
• Held readings will blink
Save and Export a Reading
• Press center button to save reading
from live or held reading
• Saved readings will export to Edge App
when app and meter are connected*
• Upload readings from meter to app
• Access to expanded material/species selections,
including foreign species sets
• View all readings on a single screen
• Adds timestamp and geotags to readings
• Exclude outlier readings from statistics
• Generates plot of all readings
• Customize LED ranges
• Multi-language support for app and meter
• Export readings to Excel® for additional
analysis and report generation
Download the App
Support and FAQ
Navigator Series
*BDX-30 only
Copyright 2021 Delmhorst Instrument Co.
510QSG-0001, Rev 06/2021

Your BDX Meter
Components
1) Display
• Large, easy to read under all conditions
2) Read Button
• Press from any screen to enter live
reading mode
• Press again to toggle between live
and held reading
3) Navigation Buttons
• Move between and down into the
READ, SET and STATS menus
• Center button to save readings or
changes to settings
4) Easy-grip Handle
• Easily push pins into material
1
2
3
4
5
6
78
Display
Read
Button
Navigation
Buttons
Easy-grip
handle
LEDs
Light
Sensor
Pins & Pin Cap Electrode Connector
& Electrode Cap
5) Colored LEDs
• Red, yellow, and green LEDs show the
relative moisture status
• Adjustable within the Delmhorst Edge App
6) Ambient Light Sensor
• Turns backlight on and off in Auto
Backlight mode
7) Pins
• Insert integral pins up to 5/16”into
material to take reading
8) Electrode Connector
• Connect with any Delmhorst
electrode to extend functionality
Read Functions
Stats Functions
Set Functions
Read
Set
Stats
• Calibration Check: 12% MC
• Temperature Units: °F/°C
• Meter Timeout: 1/4/10 minutes
• Bluetooth®: ON/OFF
• Display Brightness: 1-10
• Backlight: ON/OFF/AUTO
• Display Contrast: 1-10
• View, hold and save readings
• Change material/species
• Adjust alarm set point
• Set material temperature
• Set insulated vs. non-insulated pins
• Save up to 100 readings
• Saved readings contain material type,
reading value, material temp, and pin type
• View average, high and low values
• View last 10 readings
Selection Arrows
Bluetooth® Indicator *
• Solid
- On and connected
• Blinking
- On and seeking connection
• None
- Off
Read Adjustments
• Up/down to move between
Read screen settings settings
• Left/right buttons to adjust value
• Left/right to adjust when
blinking
• Center/down to enter current
selection