DeLonghi ETAM29.666.S User manual

De’Longhi Appliances via Seitz, 47 31100 Treviso Italia www.delonghi.com 5713223481/02.16

ETAM29.66X
BEAN TO CUP ESPRESSO
AND CAPPUCCINO
MACHINE
Instruction for Use

2
EN
page 6
B1 B5
B4
B6
B7
B3
B8B9B10
B11
B
C
D
C1 C2
C5 C6
C4*
C3
C7
D1
D2
D3
D4
D5
D6
B2

3
A14
A1
A
A4
A17
A5
A6
A2
B
A21
A9
A10
A8
A3
A7
A11 A12
A18
A13
A19
A20
A16
A15
B1 B5
B4
B6
B7
B3
B8B9B10
B11
B
C
D
C1 C2
C5 C6
C4*
C3
C7
D1
D2
D3
D4
D5
D6
B2

4
3
45
2
1
6
11
14 15
14
13
16 17
12
789
10
29
27 29
31 34
3028
18 19
26
25
26 28
30 32
31
PUSH
PUSH
B
A
0,5 L
20 21
2422 23

5
345
2
1
6
11
14 15
14
13
16 17
12
789
10
29
27 29
31 34
3028
18 19
26
25
26 28
30 32
31
PUSH
PUSH
B
A
0,5 L
20 21
2422 23

6
CONTENTS
FUNDAMENTAL SAFETY WARNINGS....................7
IMPORTANT SAFEGUARDS.................................8
Symbols used in these instructions ..........................8
Designated use ........................................................8
Instruction for Use....................................................8
INTRODUCTION ................................................ 8
Letters in brackets....................................................8
Troubleshooting and repairs ....................................8
DESCRIPTION ...................................................9
Description of the appliance ....................................9
Description of the touch screen................................9
Description of the accessories ..................................9
Description of the milk container.............................9
BEFORE USE .....................................................9
Checking the appliance............................................9
Installing the appliance ...........................................9
Connecting the appliance ........................................9
Setting up the appliance........................................10
TURNING THE APPLIANCE ON .......................... 10
TURNING THE APPLIANCE OFF......................... 10
MENU SETTINGS ............................................. 10
Rinsing...................................................................11
Descaling ...............................................................11
Install lter ............................................................11
Replacing the limescale lter (if installed).............11
Adjust time ............................................................11
Auto-start..............................................................11
Auto-o (standby).................................................11
Energy saving.........................................................11
Setting the temperature ........................................12
Setting water hardness..........................................12
Setting the language .............................................12
Beep ......................................................................12
Default values (reset).............................................12
Statistics function ..................................................12
MAKING COFFEE ............................................. 12
Selecting the coee taste.......................................12
Selecting the quantity of coee in the cup.............13
Customising the“my coee”quantity ....................13
Adjusting the coee mill........................................13
Tips for a hotter coee ...........................................13
Making coee using coee beans..........................13
Making coee using pre-ground coee .................14
Making DOPPIO+ coee using coee beans ..........14
Customising the DOPPIO+ coee quantity ............14
Making LONG coee using coee beans.................14
Making LONG coee using pre-ground coee........14
Customising the“LONG coee”quantity.................14
MAKING CAPPUCCINOS AND MILK BASED
COFFEES........................................................15
Filling and attaching the milk container ................15
Adjusting the amount of froth ...............................15
Making cappuccino................................................15
Preparing“MILK MENU”drinks...............................15
Cleaning the milk container after use ....................15
Programming the quantity of coee and milk in the
cup for the CAPPUCCINO icon.................................16
Programming the quantity of coee and milk in the
cup for MILK MENU icon drinks ..............................16
DELIVERING HOT WATER ................................. 16
Changing the quantity of water delivered
automatically.........................................................16
CLEANING ...................................................... 16
Cleaning the machine............................................16
Cleaning the coee grounds container...................17
Cleaning the drip tray and condensate tray............17
Cleaning the inside of the coee machine .............17
Cleaning the water tank.........................................17
Cleaning the coee spouts.....................................17
Cleaning the pre-ground coee funnel..................17
Cleaning the infuser...............................................17
Cleaning the milk container...................................18
Cleaning the hot water/steam connection nozzle..18
DESCALING..................................................... 18
SETTING WATER HARDNESS............................. 19
Measuring water hardness.....................................19
Setting water hardness..........................................20
WATER SOFTENER FILTER *CERTAIN MODELS
ONLY............................................................. 20
Installing the lter.................................................20
Replacing the lter ................................................20
Removing the lter................................................21
TECHNICAL DATA............................................. 21
DISPOSAL....................................................... 21
DISPLAYED MESSAGES .................................... 21
TROUBLESHOOTING........................................ 23
ELECTRICAL REQUIREMENTS ........................... 24
FUNDAMENTAL SAFETY WARNINGS
• This appliance can be used by persons with reduced physical, sensory or mental ca-
pabilities or lack of experience and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way and understand the hazards
involved.
• Children shall not play with the appliance.
• Never clean by immersing the appliance in water.
• This is an household appliance only. It is not intended to be used in: sta kitchen
areas in shops, oces and other working environments; farm houses; by clients in
hotels, motels and other residential type environments; bed and breakfast type
environments.
• If the plug or cord is damaged, it must be replaced by Customer Services only to avoid
all risk.
FOR EUROPEAN MARKETS ONLY:
• Always unplug the appliance when left unattended and before assembly, taking apart
or cleaning.
• This appliance shall not be used by children. Keep the appliance and its cord out of
reach of children.
• Appliances can be used by persons with reduced physical, sensory or mental capa-
bilities or lack of experience and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way and if they understand the
hazards involved.
• Children shall not play with the appliance.
Surfaces marked with this symbol become hot during use (the symbol is present in
certain models only).

7
Making LONG coee using pre-ground coee........14
Customising the“LONG coee”quantity.................14
MAKING CAPPUCCINOS AND MILK BASED
COFFEES........................................................15
Filling and attaching the milk container ................15
Adjusting the amount of froth ...............................15
Making cappuccino................................................15
Preparing“MILK MENU”drinks...............................15
Cleaning the milk container after use ....................15
Programming the quantity of coee and milk in the
cup for the CAPPUCCINO icon.................................16
Programming the quantity of coee and milk in the
cup for MILK MENU icon drinks ..............................16
DELIVERING HOT WATER ................................. 16
Changing the quantity of water delivered
automatically.........................................................16
CLEANING ...................................................... 16
Cleaning the machine............................................16
Cleaning the coee grounds container...................17
Cleaning the drip tray and condensate tray............17
Cleaning the inside of the coee machine .............17
Cleaning the water tank.........................................17
Cleaning the coee spouts.....................................17
Cleaning the pre-ground coee funnel..................17
Cleaning the infuser...............................................17
Cleaning the milk container...................................18
Cleaning the hot water/steam connection nozzle..18
DESCALING..................................................... 18
SETTING WATER HARDNESS............................. 19
Measuring water hardness.....................................19
Setting water hardness..........................................20
WATER SOFTENER FILTER *CERTAIN MODELS
ONLY............................................................. 20
Installing the lter.................................................20
Replacing the lter ................................................20
Removing the lter................................................21
TECHNICAL DATA............................................. 21
DISPOSAL....................................................... 21
DISPLAYED MESSAGES .................................... 21
TROUBLESHOOTING........................................ 23
ELECTRICAL REQUIREMENTS ........................... 24
FUNDAMENTAL SAFETY WARNINGS
• This appliance can be used by persons with reduced physical, sensory or mental ca-
pabilities or lack of experience and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way and understand the hazards
involved.
• Children shall not play with the appliance.
• Never clean by immersing the appliance in water.
• This is an household appliance only. It is not intended to be used in: sta kitchen
areas in shops, oces and other working environments; farm houses; by clients in
hotels, motels and other residential type environments; bed and breakfast type
environments.
• If the plug or cord is damaged, it must be replaced by Customer Services only to avoid
all risk.
FOR EUROPEAN MARKETS ONLY:
• Always unplug the appliance when left unattended and before assembly, taking apart
or cleaning.
• This appliance shall not be used by children. Keep the appliance and its cord out of
reach of children.
• Appliances can be used by persons with reduced physical, sensory or mental capa-
bilities or lack of experience and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way and if they understand the
hazards involved.
• Children shall not play with the appliance.
Surfaces marked with this symbol become hot during use (the symbol is present in
certain models only).

8
DESCRIPTION
Description of the appliance
(page 3 - A )
A1. Beans container lid
A2. Pre-ground coee funnel lid
A3. Beans container
A4. Pre-ground coee funnel
A5. button: turns the appliance on and o (standby)
A6. Cup shelf
A7. Hot water and steam connection nozzle
A8. Coee spout (adjustable height)
A9. Condensate tray
A10. Cup tray
A11. Drip tray water level indicator
A12. Drip tray
A13. Coee grounds container
A14. Main switch (ON/OFF)
A15. Socket for power cable connector
A16. Infuser door
A17. Infuser
A18. Water tank
A19. Water softener lter housing
A20. Water tank lid
A21. Grinding adjustment dial
Description of the touch screen
(page 2 - B )
A number of icons on the touch screen have a double function. This
is indicated in brackets in the description.
B1. icon: to deliver hot water (When in the settings menu,
press to conrm the selection)
B2. icon: to access or exit the settings menu.
B3. Display
B4. icon: to select the coee quantity (When in the set-
tings menu, press to scroll through the menu items)
B5. aroma selection icon: to select the coee taste
(When in the settings menu, press to scroll through the menu
items)
B6. icon: to make 2 cups of coee with the settings
displayed
B7. icon: to make 1 cup of coee with the settings
displayed
B8. MILK MENU icon: to select one of the available milk
based drinks (CAFFELATTE, MACCHIATO, FLAT WHITE, MILK)
B9. CAPPUCCINO icon: to deliver a cappuccino
B10. icon: to make one LONG coee
B11. icon: to make one DOPPIO+ coee
IMPORTANT SAFEGUARDS
Symbols used in these instructions
Important warnings are identied by these symbols. It is vital to
respect these warnings.
Danger!
Failure to observe the warning may result in life threatening
injury by electric shock.
Important!
Failure to observe the warning could result in injury or damage
to the appliance.
Danger of burns!
Failure to observe the warning could result in scalds or burns.
Please note:
This symbol identies important advice or information for the
user.
Danger!
This is an electrical appliance and may cause electric shock.
You should therefore follow these safety warnings:
• Never touch the appliance with damp hands or feet.
• Never touch the plug with damp hands.
• Make sure the socket used is freely accessible at all times,
enabling the appliance to be unplugged when necessary.
• Unplug directly from the plug only. Never pull the cord as
you could damage it.
• To disconnect the appliance completely you must unplug it
from the mains socket.
• If the appliance is faulty, do not attempt to repair. Turn it
o, unplug from the mains socket and contact Customer
Services.
• Before cleaning the appliance, turn it o, unplug from the
mains socket and allow to cool.
Important:
Keep all packaging (plastic bags, polystyrene foam) away from
children.
Danger of burns!
This appliance produces hot water and steam may form while
it is in operation.
Avoid contact with splashes of water or hot steam.
When the appliance is in operation, the cup shelf (A6) could
become very hot.
Designated use
This appliance is designed and made to prepare coee and heat
drinks.
Any other use is considered improper and thus dangerous. The
manufacturer is not liable for damage deriving from improper
use of the appliance.
Instruction for Use
Read this Instruction for Use carefully before using the appli-
ance. Failure to follow this Instruction for Use may result in
burns or damage to the appliance.
The manufacturer is not liable for damage deriving from failure
to respect this Instruction for Use.
Please note:
Keep this Instruction for Use. If the appliance is passed to other
persons, they must also be provided with this Instruction for
Use.
INTRODUCTION
Thank you for choosing this bean to cup espresso and cappuc-
cino machine.
We hope you enjoy using your new appliance. Take a few min-
utes to read this Instruction for Use. This will avoid all risks and
damage to the appliance.
Letters in brackets
The letters in brackets refer to the legend in the description of
the appliance on page 2-3.
Troubleshooting and repairs
In the event of problems, rst try and resolve them following
the information given in the sections “Displayed messages” on
page 21 and“Troubleshooting”on page 23.
If this does not resolve the problem or you require further in-
formation, you should consult Customer Services by calling the
number given on the annexed“Customer Service”sheet.
If your country is not among those listed on the sheet, call the
number given in the guarantee. If repairs are required, contact
De’Longhi Customer Services only. The addresses are given in
the guarantee certicate provided with the machine.

9
DESCRIPTION
Description of the appliance
(page 3 - A )
A1. Beans container lid
A2. Pre-ground coee funnel lid
A3. Beans container
A4. Pre-ground coee funnel
A5. button: turns the appliance on and o (standby)
A6. Cup shelf
A7. Hot water and steam connection nozzle
A8. Coee spout (adjustable height)
A9. Condensate tray
A10. Cup tray
A11. Drip tray water level indicator
A12. Drip tray
A13. Coee grounds container
A14. Main switch (ON/OFF)
A15. Socket for power cable connector
A16. Infuser door
A17. Infuser
A18. Water tank
A19. Water softener lter housing
A20. Water tank lid
A21. Grinding adjustment dial
Description of the touch screen
(page 2 - B )
A number of icons on the touch screen have a double function. This
is indicated in brackets in the description.
B1. icon: to deliver hot water (When in the settings menu,
press to conrm the selection)
B2. icon: to access or exit the settings menu.
B3. Display
B4. icon: to select the coee quantity (When in the set-
tings menu, press to scroll through the menu items)
B5. aroma selection icon: to select the coee taste
(When in the settings menu, press to scroll through the menu
items)
B6. icon: to make 2 cups of coee with the settings
displayed
B7. icon: to make 1 cup of coee with the settings
displayed
B8. MILK MENU icon: to select one of the available milk
based drinks (CAFFELATTE, MACCHIATO, FLAT WHITE, MILK)
B9. CAPPUCCINO icon: to deliver a cappuccino
B10. icon: to make one LONG coee
B11. icon: to make one DOPPIO+ coee
Description of the accessories
(page 2 - C )
C1. Pre-ground coee measure
C2. Cleaning brush
C3. Hot water spout
C4. Water softener lter (*certain models only)
C5. “Total Hardness Test”indicator paper
C6. Descaler
C7. Power cord
Description of the milk container
(page 2 - D )
D1. Milk container lid
D2. Froth adjustment and CLEAN dial
D3. Milk container
D4. Lid extraction button
D5. Frothed milk spout (adjustable)
D6. Milk intake tube
BEFORE USE
Checking the appliance
After removing the packaging, make sure the product is com-
plete and undamaged and that all accessories are present. Do
not use the appliance if it is visibly damaged. Contact De’Longhi
Customer Services.
Installing the appliance
Important!
When you install the appliance, you should respect the follow-
ing safety warnings:
• The appliance gives o heat. After positioning the appli-
ance on the worktop, leave a space of at least 3 cm be-
tween the surfaces of the appliance and the side and rear
walls and at least 15 cm above the appliance.
• Water penetrating the coee machine could cause dam-
age. Do not place the appliance near taps or sinks.
• The appliance could be damaged if the water it contains
freezes. Do not install the appliance in a room where the
temperature could drop below freezing point.
• Arrange the cord in such a way that it cannot be damaged
by sharp edges or contact with hot surfaces (e.g. electric
hot plates).
Connecting the appliance
Important!
Check that the mains power supply voltage corresponds to
the value indicated on the rating plate on the bottom of the
appliance.
Any other use is considered improper and thus dangerous. The
manufacturer is not liable for damage deriving from improper
use of the appliance.
Instruction for Use
Read this Instruction for Use carefully before using the appli-
ance. Failure to follow this Instruction for Use may result in
burns or damage to the appliance.
The manufacturer is not liable for damage deriving from failure
to respect this Instruction for Use.
Please note:
Keep this Instruction for Use. If the appliance is passed to other
persons, they must also be provided with this Instruction for
Use.
INTRODUCTION
Thank you for choosing this bean to cup espresso and cappuc-
cino machine.
We hope you enjoy using your new appliance. Take a few min-
utes to read this Instruction for Use. This will avoid all risks and
damage to the appliance.
Letters in brackets
The letters in brackets refer to the legend in the description of
the appliance on page 2-3.
Troubleshooting and repairs
In the event of problems, rst try and resolve them following
the information given in the sections “Displayed messages” on
page 21 and“Troubleshooting”on page 23.
If this does not resolve the problem or you require further in-
formation, you should consult Customer Services by calling the
number given on the annexed“Customer Service”sheet.
If your country is not among those listed on the sheet, call the
number given in the guarantee. If repairs are required, contact
De’Longhi Customer Services only. The addresses are given in
the guarantee certicate provided with the machine.

10
Rinsing
Use this function to deliver hot water from the coee spout (A8)
and from the hot water spout (C3), if inserted, to clean and heat
the appliance’s internal circuit. Place a container with a mini-
mum capacity of 100ml under the coee and hot water spout.
To enable the function, proceed as follows:
1. Press the icon (B2) to enter the menu;
2. Press or (g. 5) until“Rinsing”is displayed;
3. Press the icon (g.6),“Conrm?”is displayed;
Important! Danger of burns.
Do not leave the appliance unattended while hot water is being
delivered.
4. Press the icon: after a few seconds, hot water is deliv-
ered rst from the coee spout and then from the hot water
spout (if inserted) which cleans and heats the appliance’s
internal circuit.
Please note!
• To stop delivery at any time, press any icon.
• If the appliance is not used for more than 3-4 days, we strong-
ly recommend, when switching on the appliance, performing
2/3 rinses before using it.
Descaling
For instructions on descaling, see page 18.
Install lter
For Instruction for use on how to install the lter, see the section
“Water softener lter”(page 20).
Replacing the limescale lter (if installed)
For Instruction for use on how to replace the lter, see the sec-
tion“Replacing the lter”(page 20).
Adjust time
To adjust the time on the display, proceed as follows:
1. Press the icon (B2) to enter the menu;
2. Press or (g. 5) until“Adjust time”is displayed;
3. Press the icon (g. 3). The hours ash on the display;
4. Press or to change the hour;
5. Press the icon to conrm.The minutes ash;
6. Press or to change the minutes;
7. Press the icon to conrm.
This sets the time. Press the icon to exit the menu.
Connect the appliance to an eciently earthed and correctly
installed socket with a minimum current rating of 10A only.
If the power socket does not match the plug on the appliance,
have the socket replaced with a suitable type by a qualied
professional.
Setting up the appliance
Please note :
• Coee has been used to factory test the appliance and it is
therefore completely normal for there to be traces of cof-
fee in the mill. The machine is, however, guaranteed to be
new.
• You should customise water hardness as soon as possible
following the instructions in the section “Setting water
hardness”on page 19.
1. Insert the power cable connector into the socket at the back
of the appliance and connect the appliance to the mains
electricity supply (g. 1). Make sure the main switch is
pressed (g. 2).
2. Remove the water tank (g. 3), open the lid (g. 4), ll to
the MAX line with fresh water, replace the lid and put the
tank back in the appliance.
You must rst choose the language by moving backwards and
forwards with the or arrows (g. 5), or waiting
until the languages scroll through on the display at intervals of
about 3 seconds:
3. When “English”appears, press and hold the icon (g.
6) for a few seconds until “ENGLISH set”is displayed.
Follow the instructions indicated on the appliance display:
4. “INSERT WATER SPOUT”: Check that the hot water spout
is inserted on the connection nozzle and place a container
holding a minimum of 100 ml underneath (g. 7).
5. “HOTWATER Press OK”is displayed;
6. Press the icon to conrm (g. 6). The appliance deliv-
ers water from the spout then goes o automatically.
The coee machine is now ready for normal use.
Please note :
• When setting up the appliance, you need to make 4-5 cups
of coee or 4-5 cappuccinos before the appliance starts to
give satisfactory results.
• When making the rst 5-6 cappuccinos, it is normal to hear
the noise of boiling water. After this, the noise becomes
less.
• To enjoy your coee even more and improve the perfor-
mance of your appliance, we recommend installing a water
softener lter as described in the section “Water softener
lter” (page 20). If your model is not provided with a l-
ter, you can request one from De’Longhi Customer Services.
TURNING THE APPLIANCE ON
Please note!
• Before turning the appliance on, make sure the main
switch is pressed (g. 2).
• Each time the appliance is turned on, it performs an auto-
matic preheat and rinse cycle which cannot be interrupted.
The appliance is ready for use only after completion of this
cycle.
Danger of burns!
During rinsing, a little hot water comes out of the coee spouts
and is collected in the drip tray underneath. Avoid contact with
splashes of water.
• To turn the appliance on, press the button (g. 8).
The message“Heating up, Please wait”is displayed.
When heating is complete, the message changes to“Rinsing”. As
well as heating the boiler, this also heats the internal circuits by
circulating hot water.
The appliance is at temperature when the message indicating
the taste and quantity of coee appears.
TURNING THE APPLIANCE OFF
Whenever the coee machine is turned o after being used to
make coee, it performs an automatic rinse cycle.
Danger of burns!
During rinsing, a little hot water ows from the coee spouts.
Avoid contact with splashes of water.
• To turn the appliance o, press the button (g. 8).
• The appliance performs a rinse cycle, then the message
“Turning o Please wait” is displayed and the appliance
goes o (standby).
Please note!
If you will not be using the appliance for some time, unplug
from the mains socket:
• rst turn the appliance o by pressing the button
(g. 8);
• press the main switch on the side of the appliance (g. 2).
Important!
Never press the main switch while the appliance is on.
MENU SETTINGS
To access the settings menu, press the icon (B2). Scroll
through the menu by pressing or (g. 5).

11
Rinsing
Use this function to deliver hot water from the coee spout (A8)
and from the hot water spout (C3), if inserted, to clean and heat
the appliance’s internal circuit. Place a container with a mini-
mum capacity of 100ml under the coee and hot water spout.
To enable the function, proceed as follows:
1. Press the icon (B2) to enter the menu;
2. Press or (g. 5) until“Rinsing”is displayed;
3. Press the icon (g.6),“Conrm?”is displayed;
Important! Danger of burns.
Do not leave the appliance unattended while hot water is being
delivered.
4. Press the icon: after a few seconds, hot water is deliv-
ered rst from the coee spout and then from the hot water
spout (if inserted) which cleans and heats the appliance’s
internal circuit.
Please note!
• To stop delivery at any time, press any icon.
• If the appliance is not used for more than 3-4 days, we strong-
ly recommend, when switching on the appliance, performing
2/3 rinses before using it.
Descaling
For instructions on descaling, see page 18.
Install lter
For Instruction for use on how to install the lter, see the section
“Water softener lter”(page 20).
Replacing the limescale lter (if installed)
For Instruction for use on how to replace the lter, see the sec-
tion“Replacing the lter”(page 20).
Adjust time
To adjust the time on the display, proceed as follows:
1. Press the icon (B2) to enter the menu;
2. Press or (g. 5) until“Adjust time”is displayed;
3. Press the icon (g. 3). The hours ash on the display;
4. Press or to change the hour;
5. Press the icon to conrm.The minutes ash;
6. Press or to change the minutes;
7. Press the icon to conrm.
This sets the time. Press the icon to exit the menu.
Auto-start
You can set the auto-start time in order to have the appliance
ready at a certain time (for example in the morning) so you can
make coee immediately.
Please note!
To enable this function, the time must already be set correctly.
To enable auto-start, proceed as follows:
1. Press the icon (B2) to enter the menu;
2. Press or (g. 5) until“Auto-start”is displayed;
3. Press the button (g. 3).“Enable?”is displayed;
4. Press the icon to conrm;
5. Press or to choose the hour;
6. Press the icon to conrm;
7. Press or to change the minutes;
8. Press the icon to conrm;
9. Press the icon to exit the menu.
Once the time has been conrmed, activation of auto-start is
indicated by the symbol displayed alongside the time.
To disable the function:
1. Select auto-start from the menu;
2. Press the icon.“Disable?”is displayed;
3. Press the icon to conrm.
The symbol is no longer displayed.
Auto-o (standby)
Auto-o can be set so that the appliance goes o after 15 or
30 minutes, or 1, 2 or 3 hours. To programme Auto-o, proceed
as follows:
1. Press the (B2) icon (B2) to enter the menu;
2. Press or (g. 5) until“Auto-o”is displayed;
3. Press the icon (g. 6);
4. Press or until the required operating time (15
or 30 minutes, or 1, 2 or 3 hours) is displayed;
5. Press the icon to conrm;
6. Press the icon to exit the menu.
Auto-o is programmed.
Energy saving
Use this function to enable or disable energy saving. When en-
abled, the function reduces energy consumption in compliance
with European regulations.
To disable (or enable) energy saving, proceed as follows:
1. Press the icon (B2) to enter the menu;
2. Press or (g. 5) until “Energy Saving” is
displayed;
TURNING THE APPLIANCE ON
Please note!
• Before turning the appliance on, make sure the main
switch is pressed (g. 2).
• Each time the appliance is turned on, it performs an auto-
matic preheat and rinse cycle which cannot be interrupted.
The appliance is ready for use only after completion of this
cycle.
Danger of burns!
During rinsing, a little hot water comes out of the coee spouts
and is collected in the drip tray underneath. Avoid contact with
splashes of water.
• To turn the appliance on, press the button (g. 8).
The message“Heating up, Please wait”is displayed.
When heating is complete, the message changes to“Rinsing”. As
well as heating the boiler, this also heats the internal circuits by
circulating hot water.
The appliance is at temperature when the message indicating
the taste and quantity of coee appears.
TURNING THE APPLIANCE OFF
Whenever the coee machine is turned o after being used to
make coee, it performs an automatic rinse cycle.
Danger of burns!
During rinsing, a little hot water ows from the coee spouts.
Avoid contact with splashes of water.
• To turn the appliance o, press the button (g. 8).
• The appliance performs a rinse cycle, then the message
“Turning o Please wait” is displayed and the appliance
goes o (standby).
Please note!
If you will not be using the appliance for some time, unplug
from the mains socket:
• rst turn the appliance o by pressing the button
(g. 8);
• press the main switch on the side of the appliance (g. 2).
Important!
Never press the main switch while the appliance is on.
MENU SETTINGS
To access the settings menu, press the icon (B2). Scroll
through the menu by pressing or (g. 5).

12
Strong taste
Extra-strong taste
To change the taste, press the icon (g. 9) repeatedly until
the required taste is displayed.
Selecting the quantity of coee in the cup
The appliance is set by default to make a standard quantity of
coee. To select the quantity of coee, press the icon
(g. 10) until the message corresponding to the required quan-
tity of coee is displayed:
Coee selected Quantity in cup (ml)
MY COFFEE Programmable:
from ≃20 to ≃180
SHORT ≃40
STANDARD ≃60
LONG ≃90
EXTRA LONG COFFEE ≃120
Customising the “my coee”quantity
The appliance is set by default to automatically deliver 30 ml of
“MY COFFEE”. To modify this quantity, proceed as follows:
1. Place a cup under the coee spouts ( g. 13).
2. Press the icon (g. 10) until “MY COFFEE” is
displayed.
3. Keep the icon (B7) pressed until the message “1 MY
COFFEE Program quantity” is displayed and coee delivery
begins. Release the icon.
4. As soon as the coee in the cup reaches the required level,
press the icon again.
The quantity of coee in the cup has now been programmed.
Adjusting the coee mill
The coee mill is set by default to prepare coee correctly and
should not require regulating initially.
However, if after making the rst few coees you nd that the
coee is either too weak and not creamy enough or delivery is
too slow (a drop at a time), this can be corrected by adjusting
the grinding adjustment dial (g. 11).
Please note!
The grinding adjustment dial must only be turned when the
coee mill is in operation.
3. Press the icon (g. 6).“Disable?”is displayed (or“Ena-
ble?”if the function has been disabled);
4. Press the icon to disable (or enable) energy saving
mode;
5. Press the icon to exit the menu.
When the function is active, if the machine is not used for some
time,“Energy saving”is displayed.
Please note!
• When in energy saving mode, a few seconds elapse before
the rst coee, cappuccino or milk based coee is delivered
as the appliance must heat up again.
• To prepare any drink, press any icon to exit energy saving,
then press the icon corresponding to the drink you want to
make.
• If the milk container is inserted, “Energy saving” is not
activated.
Setting the temperature
To modify the temperature of the water used to make the coee,
proceed as follows:
1. Press the icon (B2) to enter the menu;
2. Press or (g. 5) until “Set temperature” is
displayed;
3. Press the icon (g. 6);
4. Press or until the required temperature is dis-
played (●=low; ●●●●=maximum);
5. Press the icon to conrm;
6. Press the icon to exit the menu.
Setting water hardness
For instructions on setting water hardness, see page 19.
Setting the language
To modify the language of the display, proceed as follows:
1. Press the icon (B2) to enter the menu;
2. Press or (g. 5) until “Set language” is
displayed;
3. Press the icon (g. 6);
4. Press the or button until the required lan-
guage is displayed ;
5. Press the icon to conrm;
6. A message conrming the language installed is displayed;
7. Press the icon to exit the menu.
Beep
This enables or disables the buzzer emitted by the machine each
time an icon or button is pressed or an accessory is inserted/
removed.To disable or re-enable the beep, proceed as follows:
1. Press the icon (B2) to enter the menu;
2. Press or (g. 5) until“Beep”is displayed;
3. Press the icon (g.6),“Disable?” is displayed; (or“Ena-
ble?”if the function has been disabled);
4. Press the icon to enable or disable the beep;
5. Press the icon to exit the menu.
Default values (reset)
This resets all menu settings and programmed quantities back
to the default values (with the exception of the language which
remains as set).
To reset the default values, proceed as follows:
1. Press the icon (B2) to enter the menu;
2. Press or (g. 5) until “Default values” is
displayed;
3. Press the icon (g. 6);
4. The message“Conrm?”is now displayed;
5. Press the icon to conrm and exit.
Statistics function
This displays statistics relating to the machine. To display, pro-
ceed as follows:
1. Press the icon (B2) to enter the menu;
2. Press or (g. 5) until“Statistics”is displayed;
3. Press the icon (g. 6);
4. By pressing or you can check:
- how many coees have been made;
- the total number of cappuccinos and milk based coees
made;
- the total number of litres of water delivered;
- how many times the machine has been descaled;
- how many times the water softener lter has been
replaced.
5. Press the icon twice to exit the menu.
MAKING COFFEE
Selecting the coee taste
The appliance is set by default to make coee with a standard
taste.
You can also choose one of these tastes:
Extra-mild taste
Mild taste
Standard taste

13
Strong taste
Extra-strong taste
To change the taste, press the icon (g. 9) repeatedly until
the required taste is displayed.
Selecting the quantity of coee in the cup
The appliance is set by default to make a standard quantity of
coee. To select the quantity of coee, press the icon
(g. 10) until the message corresponding to the required quan-
tity of coee is displayed:
Coee selected Quantity in cup (ml)
MY COFFEE Programmable:
from ≃20 to ≃180
SHORT ≃40
STANDARD ≃60
LONG ≃90
EXTRA LONG COFFEE ≃120
Customising the “my coee”quantity
The appliance is set by default to automatically deliver 30 ml of
“MY COFFEE”. To modify this quantity, proceed as follows:
1. Place a cup under the coee spouts ( g. 13).
2. Press the icon (g. 10) until “MY COFFEE” is
displayed.
3. Keep the icon (B7) pressed until the message “1 MY
COFFEE Program quantity” is displayed and coee delivery
begins. Release the icon.
4. As soon as the coee in the cup reaches the required level,
press the icon again.
The quantity of coee in the cup has now been programmed.
Adjusting the coee mill
The coee mill is set by default to prepare coee correctly and
should not require regulating initially.
However, if after making the rst few coees you nd that the
coee is either too weak and not creamy enough or delivery is
too slow (a drop at a time), this can be corrected by adjusting
the grinding adjustment dial (g. 11).
Please note!
The grinding adjustment dial must only be turned when the
coee mill is in operation.
If the coee is delivered too slowly or
not at all, turn one click clockwise to-
wards“7”.
For fuller bodied creamier coee, turn
one click anticlockwise towards “1” (do
not turn more than one click at a time
otherwise the coee could be delivered
a drop at a time). These adjustments will only be evident after
at least 2 cups of coee have been delivered. If this adjustment
does not obtain the desired result, turn the dial another click.
Tips for a hotter coee
For hotter coee, you should:
• perform a rinse cycle by selecting the“Rinsing”function in
the settings menu (page 10).
• warm the cups with hot water (using the hot water
function);
• increase the coee temperature in the settings menu
(page 12).
Making coee using coee beans
Important!
Do not use caramelised or candied coee beans as they could
stick to the coee mill and make it unusable.
1. Fill the container with coee beans (g. 12).
2. Place under the coee spouts:
- 1 cup, if you want to make 1 coee (g. 13);
- 2 cups, if you want 2 coees (g. 14).
3. Lower the spouts as near as possible to the cup. This makes
a creamier coee (g. 15).
4. Press the icon corresponding to the number of coees re-
quired (one cup or two cups ).
5. Preparation begins. The amount of coee selected is dis-
played together with a progress bar which gradually lls as
preparation progresses.
Please note:
• While the machine is making coee, delivery can be inter-
rupted at any moment by pressing any icon.
• At the end of delivery, to increase the quantity of coee in
the cup, just press one of the coee icons (B6 or B7) (within
3 seconds).
Once the coee has been made, the appliance is ready to make
the next drink.
Important!
• Various alarm messages could be displayed while using
the machine (FILL TANK, EMPTY GROUNDS CONTAINER,
Beep
This enables or disables the buzzer emitted by the machine each
time an icon or button is pressed or an accessory is inserted/
removed.To disable or re-enable the beep, proceed as follows:
1. Press the icon (B2) to enter the menu;
2. Press or (g. 5) until“Beep”is displayed;
3. Press the icon (g.6),“Disable?” is displayed; (or“Ena-
ble?”if the function has been disabled);
4. Press the icon to enable or disable the beep;
5. Press the icon to exit the menu.
Default values (reset)
This resets all menu settings and programmed quantities back
to the default values (with the exception of the language which
remains as set).
To reset the default values, proceed as follows:
1. Press the icon (B2) to enter the menu;
2. Press or (g. 5) until “Default values” is
displayed;
3. Press the icon (g. 6);
4. The message“Conrm?”is now displayed;
5. Press the icon to conrm and exit.
Statistics function
This displays statistics relating to the machine. To display, pro-
ceed as follows:
1. Press the icon (B2) to enter the menu;
2. Press or (g. 5) until“Statistics”is displayed;
3. Press the icon (g. 6);
4. By pressing or you can check:
- how many coees have been made;
- the total number of cappuccinos and milk based coees
made;
- the total number of litres of water delivered;
- how many times the machine has been descaled;
- how many times the water softener lter has been
replaced.
5. Press the icon twice to exit the menu.
MAKING COFFEE
Selecting the coee taste
The appliance is set by default to make coee with a standard
taste.
You can also choose one of these tastes:
Extra-mild taste
Mild taste
Standard taste

14
MAKING CAPPUCCINOS AND MILK BASED COFFEES
Please note!
• To avoid producing milk with poor froth or large bubbles,
always clean the milk container lid and hot water nozzle as
described in the section “Cleaning the milk container” on
pages 15 and 18.
Filling and attaching the milk container
1. Remove the lid (g. 17);
2. Fill the milk container with a sucient quantity of milk,
not exceeding the MAX level marked on the handle (g.
18). Each mark on the side of the container corresponds to
about 100 ml of milk.
Please note!
• For a denser more even froth, you must use skimmed or
partially skimmed milk at refrigerator temperature (about
5°C).
• If“Energy saving”mode is enabled, you may have to wait a
few seconds before the drink is delivered.
3. Make sure the milk intake tube is correctly inserted in the
bottom of the milk container lid (g. 19).
4. Place the lid back on the milk container.
5. Remove the hot water spout (C3) (g. 20).
6. Attach the milk container to the connection nozzle and
push as far as it will go (g. 21).The machine emits a beep
(if the beep function is enabled).
7. Place a suciently large cup under the coee spouts
and the frothed milk spout. Adjust the length of the milk
spout (g. 22). To move it nearer the cup, simply pull it
downwards.
8. Follow the Instruction for use below for each function.
Adjusting the amount of froth
Turn the froth adjustment dial (D2) to adjust the amount of froth
on the milk delivered while making cappuccino and milk based
coees.
Dial
position
Description Recommended for...
No froth CAFFELATTE /
MILK (hot milk)
Min. froth LATTE MACCHIATO/
FLAT WHITE
Max. froth CAPPUCCINO /
MILK (frothed milk)
etc.). Their meaning is explained in the section “Displayed
messages” (page 23).
• For hotter coee, see the section “Tips for a hotter coee”
(page 13).
• If the coee is delivered a drop at a time, too weak and not
creamy enough or too cold, read the tips in the “Trouble-
shooting”section (page 23).
Making coee using pre-ground coee
Important!
• Never place coee beans in the pre-ground coee funnel
as this could damage the appliance.
• Never add pre-ground coee when the machine is o or it
could spread through the inside of the machine and dirty
it.This could damage the appliance.
• Never use more than 1 level measure or it could dirty the
inside of the coee machine or block the funnel.
Please note!
When you use pre-ground coee, you can only make one cup of
coee at a time.
1. Press the icon repeatedly (g. 9) until“Pre-ground”is
displayed.
2. Open the pre-ground coee funnel lid (A2).
3. Make sure the funnel is not blocked, then add one level
measure of pre-ground coee (g. 16).
4. Place a cup under the coee spouts (g. 13).
5. Press the 1 cup coee icon (B7).
6. Preparation begins. The amount of coee selected is dis-
played together with a progress bar which gradually lls as
preparation progresses.
Please note!
If “Energy Saving” mode is active, you may have to wait a few
seconds before the rst coee is delivered.
Making DOPPIO+ coee using coee beans
Prepare the appliance following the instructions in the section
“Making coee using coee beans”, then press the icon
(B11).
Customising the DOPPIO+ coee quantity
The appliance is set by default to deliver about 120 ml of
DOPPIO+ coee.To modify these settings, proceed as follows:
1. Place a suciently large cup or glass under the coee
spouts (g. 13);
2. Press and hold the icon (B11) until“Program quanti-
ty”is displayed;
3. Release the icon. The appliance starts delivering
coee;
4. As soon as the coee in the cup reaches the required level,
press the icon again.
The quantity of coee in the cup has now been programmed.
Please note!
You can programme a minimum quantity of about 80ml.
You can programme a maximum quantity of about 160ml.
Making LONG coee using coee beans
Prepare the appliance following the instructions in the section
“Making coee using coee beans”, then press the icon
(B10).
Making LONG coee using pre-ground coee
1. Follow the instructions in points 1, 2, 3 and 4 of the section
“Making coee using pre-ground coee”, then press the
icon (B10).
2. The appliance starts making coee and displays a progress
bar. Halfway through preparation, the message“ADD PRE-
GROUND COFFEE, Press OK”appears.
3. Add one level measure of pre-ground coee and press
(g. 6).
4. Preparation resumes and the appliance displays a progress
bar which lls gradually as preparation proceeds.
Customising the “LONG coee”quantity
The appliance is set by default to automatically deliver about
200ml of LONG coee. To modify these settings, proceed as
follows:
1. Place a suciently large cup or glass under the coee
spouts (g. 13).
2. Press and hold the icon (B10) until “Program quanti-
ty”is displayed.
3. Release the icon. The appliance starts delivering
coee.
4. As soon as the coee in the cup reaches the required level,
press the icon again.
The quantity of coee in the cup has now been programmed.
Please note!
If the programme uses pre-ground coee, the appliance will
prompt you to add a second level measure of coee.

15
MAKING CAPPUCCINOS AND MILK BASED COFFEES
Please note!
• To avoid producing milk with poor froth or large bubbles,
always clean the milk container lid and hot water nozzle as
described in the section “Cleaning the milk container” on
pages 15 and 18.
Filling and attaching the milk container
1. Remove the lid (g. 17);
2. Fill the milk container with a sucient quantity of milk,
not exceeding the MAX level marked on the handle (g.
18). Each mark on the side of the container corresponds to
about 100 ml of milk.
Please note!
• For a denser more even froth, you must use skimmed or
partially skimmed milk at refrigerator temperature (about
5°C).
• If“Energy saving”mode is enabled, you may have to wait a
few seconds before the drink is delivered.
3. Make sure the milk intake tube is correctly inserted in the
bottom of the milk container lid (g. 19).
4. Place the lid back on the milk container.
5. Remove the hot water spout (C3) (g. 20).
6. Attach the milk container to the connection nozzle and
push as far as it will go (g. 21).The machine emits a beep
(if the beep function is enabled).
7. Place a suciently large cup under the coee spouts
and the frothed milk spout. Adjust the length of the milk
spout (g. 22). To move it nearer the cup, simply pull it
downwards.
8. Follow the Instruction for use below for each function.
Adjusting the amount of froth
Turn the froth adjustment dial (D2) to adjust the amount of froth
on the milk delivered while making cappuccino and milk based
coees.
Dial
position
Description Recommended for...
No froth CAFFELATTE /
MILK (hot milk)
Min. froth LATTE MACCHIATO/
FLAT WHITE
Max. froth CAPPUCCINO /
MILK (frothed milk)
Making cappuccino
The icon (B9) on the control panel enables CAPPUCCINO to be
prepared automatically. Proceed as follows:
1. Fill the milk container and attach it as described above.
2. Turn the froth adjustment dial on the milk container lid to
the position corresponding to the required froth (see previ-
ous table).
3. Press the CAPPUCCINO icon (B9). The name of the
drink selected is displayed together with a progress bar
which gradually lls as preparation progresses.
4. After a few seconds, frothed milk is delivered from the milk
spout into the cup below. Then the machine automatically
makes the coee after delivering the milk.
Preparing “MILK MENU” drinks
Besides the drinks described above, the appliance automatically
prepares CAFFELATTE, MACCHIATO, FLAT WHITE and MILK.
To prepare one of these drinks, simply proceed as follows:
1. Fill the milk container and attach it as described above.
2. Turn the froth adjustment dial on the milk container lid to
the position corresponding to the required froth.
3. Press the MILK MENU icon (B8).
4. Press or (g. 5) until the required drink is dis-
played (CAFFELATTE, MACCHIATO, FLAT WHITE, MILK).
5. Press the icon (g. 6) to start delivery.
6. After a few seconds, frothed milk is delivered from the milk
spout into the cup below. For drinks with coee, the ma-
chine automatically makes the coee after delivering the
milk.
Please note: general indications when preparing all
milk based drinks
• If you want to interrupt preparation during delivery, press
the corresponding icon.
• At the end of delivery, to increase the quantity of milk or
coee in the cup, just press and hold (within 3 seconds) the
icon corresponding to the drink being made.
• Do not leave the milk container out of the refrigerator for
long periods.The warmer the milk (5°C is ideal), the poorer
the quality of froth produced.
Cleaning the milk container after use
Important! Danger of burns
When cleaning the internal tubes of the milk container, a little
hot water and steam leak out of the frothed milk spout. Avoid
contact with splashes of water.
“SET DIAL TO CLEAN”ashes on the display each time you use a
milk function. To eliminate all milk residues, proceed as follows:
1. Leave the milk container in the machine (you do not need
to empty it);
3. Release the icon. The appliance starts delivering
coee;
4. As soon as the coee in the cup reaches the required level,
press the icon again.
The quantity of coee in the cup has now been programmed.
Please note!
You can programme a minimum quantity of about 80ml.
You can programme a maximum quantity of about 160ml.
Making LONG coee using coee beans
Prepare the appliance following the instructions in the section
“Making coee using coee beans”, then press the icon
(B10).
Making LONG coee using pre-ground coee
1. Follow the instructions in points 1, 2, 3 and 4 of the section
“Making coee using pre-ground coee”, then press the
icon (B10).
2. The appliance starts making coee and displays a progress
bar. Halfway through preparation, the message“ADD PRE-
GROUND COFFEE, Press OK”appears.
3. Add one level measure of pre-ground coee and press
(g. 6).
4. Preparation resumes and the appliance displays a progress
bar which lls gradually as preparation proceeds.
Customising the “LONG coee”quantity
The appliance is set by default to automatically deliver about
200ml of LONG coee. To modify these settings, proceed as
follows:
1. Place a suciently large cup or glass under the coee
spouts (g. 13).
2. Press and hold the icon (B10) until “Program quanti-
ty”is displayed.
3. Release the icon. The appliance starts delivering
coee.
4. As soon as the coee in the cup reaches the required level,
press the icon again.
The quantity of coee in the cup has now been programmed.
Please note!
If the programme uses pre-ground coee, the appliance will
prompt you to add a second level measure of coee.

16
Important!
• Do not use solvents, abrasive detergents or alcohol to clean
the coee machine.With De’Longhi superautomatic coee
machines, you need not use chemical products to clean the
machine.
• None of the components of the appliance can be washed in
a dishwasher with the exception of the milk container (D).
• Do not use metal objects to remove encrustations or coee
deposits as they could scratch metal or plastic surfaces.
Cleaning the coee grounds container
When “EMPTY GROUNDS CONTAINER” is displayed, the grounds
container must be emptied and cleaned. The appliance cannot
be used to make coee until you have cleaned the grounds con-
tainer. Even if not full, the empty grounds container message is
displayed 72 hours after the rst coee has been prepared. For
the 72 hours to be calculated correctly, the machine must never
be turned o with the main switch.
Important! Danger of burns
If you make a number of cappuccinos one after the other, the
metal cup tray becomes hot. Wait for it to cool down before
touching it and handle it from the front only.
To clean (with the machine on):
• Remove the drip tray (g. 25), empty and clean.
• Empty the grounds container (A13) and clean thoroughly
to remove all residues left on the bottom.This can be done
using the spatula on the brush (C2) provided.
• Check the condensate tray (A9) and empty if necessary
(g. 26).
Important!
When removing the drip tray, the grounds container must be
emptied, even if it contains few grounds. If this is not done,
when you make the next coees, the grounds container may ll
up more than expected and clog the machine.
Cleaning the drip tray and condensate tray
Important!
The drip tray (A12) is tted with a level indicator (red) (A11)
showing the level of water it contains (g. 27). Before the indi-
cator protrudes from the cup tray, the drip tray must be emptied
and cleaned, otherwise the water may overow the edge and
damage the appliance, the surface it rests on or the surrounding
area.
To remove the drip tray:
1. Remove the drip tray and the grounds container (g. 25);
2. Empty and wash the drip tray (A12) and grounds container
(A13);
2. Place a cup or other recipient under the milk spout (g.
22).
3. Turn the froth adjustment dial to “CLEAN”(g. 23). A pro-
gress bar appears and gradually lls as the operation pro-
ceeds together with “Cleaning underway”. Cleaning stops
automatically.
4. Turn the dial back to one of the froth selections.
5. Remove the milk container and always clean the steam
connection nozzle with a sponge (g. 24).
Please note!
• To prepare a number of cappuccinos or milk based coees,
clean the milk container after you have prepared the last
drink only.
• The milk container can be kept in the refrigerator.
• In some cases, to clean you must wait for the appliance to
heat up.
Programming the quantity of coee and milk in
the cup for the CAPPUCCINO icon
The appliance is set by default to automatically deliver standard
quantities.To change these quantities, proceed as follows:
1. Place a cup under the coee spouts and milk spout (g.
22).
2. Press and hold the CAPPUCCINO icon (B9) until and the
name of the drink and“PROGRAM MILK”are displayed.
3. Release the icon. The appliance starts delivering milk.
4. Once the required quantity of milk has been delivered into
the cup, press the icon again.
5. The appliance stops delivering milk and, if required for the
drink being prepared, after a few seconds the coee is de-
livered into the cup. The name of the drink and“PROGRAM
COFFEE”are displayed.
6. As soon as the coee in the cup reaches the required level,
press the icon again. Coee delivery stops.
The machine is now reprogrammed with the new milk and cof-
fee quantities.
Programming the quantity of coee and milk in
the cup for MILK MENU icon drinks
The appliance is set by default to automatically deliver standard
quantities.To change these quantities, proceed as follows:
1. Press the MILK MENU icon (B8).
2. Press or (g. 5) until the required drink is dis-
played (CAFFELATTE, MACCHIATO, FLAT WHITE, MILK).
3. Press and hold the icon (g. 6) until and the name of
the drink and“PROGRAM MILK”are displayed.
4. Release the icon. The appliance starts delivering milk.
5. When the required quantity of milk has been delivered into
the cup, press the icon .
6. The appliance stops delivering milk and, if required for the
drink being prepared, after a few seconds the coee is de-
livered into the cup. The name of the drink and“PROGRAM
COFFEE”are displayed.
7. As soon as the coee in the cup reaches the required level,
press the icon again. Coee delivery stops.
The machine is now reprogrammed with the new milk and cof-
fee quantities.
DELIVERING HOT WATER
Important! Danger of burns.
Do not leave the appliance unattended while hot water is being
delivered.
Please note!
If “energy saving” mode is active, you may have to wait a few
seconds before the hot water is delivered.
1. Make sure the hot water spout is attached correctly (g. 7).
2. Place a container under the spout (as close as possible to
avoid splashes).
3. Press the icon (B1).“HOTWATER”is displayed, togeth-
er with a progress bar which lls gradually as preparation
proceeds.
4. The machine delivers about 250 ml of hot water, then de-
livery stops automatically. To interrupt delivery of the hot
water manually, press the icon again.
Changing the quantity of water delivered
automatically.
The machine is set by default to automatically deliver 250 ml of
hot water. To modify these quantities, proceed as follows:
1. Position a container under the spout (g. 7).
2. Press the icon (B1) again until“HOT WATER Program
Quantity”is displayed, then release the icon.
3. When the hot water in the cup reaches the required level,
press the icon again.
The machine is now reprogrammed with the new quantity.
CLEANING
Cleaning the machine
The following parts of the machine must be cleaned regularly:
- coee grounds container (A13),
- drip tray (A12),
- water tank (A18),
- coee spouts (A8),
- pre-ground coee funnel (A2),
- infuser (A17), accessible after opening the service door (A16),
- touch screen (B)
- milk container (D)

17
Important!
• Do not use solvents, abrasive detergents or alcohol to clean
the coee machine.With De’Longhi superautomatic coee
machines, you need not use chemical products to clean the
machine.
• None of the components of the appliance can be washed in
a dishwasher with the exception of the milk container (D).
• Do not use metal objects to remove encrustations or coee
deposits as they could scratch metal or plastic surfaces.
Cleaning the coee grounds container
When “EMPTY GROUNDS CONTAINER” is displayed, the grounds
container must be emptied and cleaned. The appliance cannot
be used to make coee until you have cleaned the grounds con-
tainer. Even if not full, the empty grounds container message is
displayed 72 hours after the rst coee has been prepared. For
the 72 hours to be calculated correctly, the machine must never
be turned o with the main switch.
Important! Danger of burns
If you make a number of cappuccinos one after the other, the
metal cup tray becomes hot. Wait for it to cool down before
touching it and handle it from the front only.
To clean (with the machine on):
• Remove the drip tray (g. 25), empty and clean.
• Empty the grounds container (A13) and clean thoroughly
to remove all residues left on the bottom.This can be done
using the spatula on the brush (C2) provided.
• Check the condensate tray (A9) and empty if necessary
(g. 26).
Important!
When removing the drip tray, the grounds container must be
emptied, even if it contains few grounds. If this is not done,
when you make the next coees, the grounds container may ll
up more than expected and clog the machine.
Cleaning the drip tray and condensate tray
Important!
The drip tray (A12) is tted with a level indicator (red) (A11)
showing the level of water it contains (g. 27). Before the indi-
cator protrudes from the cup tray, the drip tray must be emptied
and cleaned, otherwise the water may overow the edge and
damage the appliance, the surface it rests on or the surrounding
area.
To remove the drip tray:
1. Remove the drip tray and the grounds container (g. 25);
2. Empty and wash the drip tray (A12) and grounds container
(A13);
3. Check the condensate tray (A9) and empty if necessary;
4. Replace the drip tray and grounds container.
Cleaning the inside of the coee machine
Danger of electric shock!
Before cleaning internal parts, the machine must be turned
o (see “Turning o”, page 10) and unplugged from the mains
power supply. Never immerse the coee machine in water.
1. Check regularly (about once a week) that the inside of the
appliance (accessible after removing the drip tray (A12))
is not dirty. If necessary, remove coee deposits with the
brush (C2) supplied and a sponge.
2. Remove the residues with a vacuum cleaner (g. 28).
Cleaning the water tank
1. Clean the water tank (A18) regularly (about once a month
and whenever you replace the water softener lter (C4) (if
provided) with a damp cloth and a little mild washing up
liquid.
2. Remove the lter (if present) and rinse with running water.
3. Replace the lter (if present), ll the tank with fresh water
and replace the tank.
4. (Models with water softener lter only) Deliver about
100ml of hot water to reactivate the lter.
Cleaning the coee spouts
1. Clean the coee spouts regularly with a sponge or cloth
(g. 29).
2. Check the holes in the coee spout are not blocked. If nec-
essary, remove coee deposits with a toothpick (g. 29).
Cleaning the pre-ground coee funnel
Check regularly (about once a month ) that the pre-ground
coee funnel (A4) is not blocked. If necessary, remove coee
deposits with the brush (C2) supplied.
Cleaning the infuser
The infuser (A17) must be cleaned at least once a month.
Important!
The infuser may not be extracted when the machine is on.
1. Make sure the machine is correctly turned o (see“Turning
o”, page 10).
2. Open the infuser door (g. 30) on the right side of the
appliance.
3. Press the two red release buttons inwards and at the same
time pull the infuser outwards (g. 31).
4. Soak the infuser in water for about 5 minutes, then rinse
under the tap.
6. The appliance stops delivering milk and, if required for the
drink being prepared, after a few seconds the coee is de-
livered into the cup. The name of the drink and“PROGRAM
COFFEE”are displayed.
7. As soon as the coee in the cup reaches the required level,
press the icon again. Coee delivery stops.
The machine is now reprogrammed with the new milk and cof-
fee quantities.
DELIVERING HOT WATER
Important! Danger of burns.
Do not leave the appliance unattended while hot water is being
delivered.
Please note!
If “energy saving” mode is active, you may have to wait a few
seconds before the hot water is delivered.
1. Make sure the hot water spout is attached correctly (g. 7).
2. Place a container under the spout (as close as possible to
avoid splashes).
3. Press the icon (B1).“HOTWATER”is displayed, togeth-
er with a progress bar which lls gradually as preparation
proceeds.
4. The machine delivers about 250 ml of hot water, then de-
livery stops automatically. To interrupt delivery of the hot
water manually, press the icon again.
Changing the quantity of water delivered
automatically.
The machine is set by default to automatically deliver 250 ml of
hot water. To modify these quantities, proceed as follows:
1. Position a container under the spout (g. 7).
2. Press the icon (B1) again until“HOT WATER Program
Quantity”is displayed, then release the icon.
3. When the hot water in the cup reaches the required level,
press the icon again.
The machine is now reprogrammed with the new quantity.
CLEANING
Cleaning the machine
The following parts of the machine must be cleaned regularly:
- coee grounds container (A13),
- drip tray (A12),
- water tank (A18),
- coee spouts (A8),
- pre-ground coee funnel (A2),
- infuser (A17), accessible after opening the service door (A16),
- touch screen (B)
- milk container (D)

18
Important!
RINSE WITH WATER ONLY
NO WASHING UP LIQUID  NO DISHWASHER
Clean the infuser without using washing up liquid as it
could be damaged.
5. Use the brush (C2) to remove any coee residues left in the
infuser housing, visible through the infuser door.
6. After cleaning, replace the infuser by sliding it onto the
internal support (g. 32), then push the PUSH symbol fully
in until it clicks into place.
Please note!
If the infuser is dicult to insert, before insertion, adapt it to the
right size by pressing the two levers shown in g. 33.
33 .
7. Once inserted, make sure the two red buttons have
snapped out (g. 34).
8. Close the infuser door (A16).
Cleaning the milk container
To keep the frother ecient, clean the milk container as de-
scribed below, every two days:
1. Remove the lid (g. 17).
2. Remove the milk spout and intake tube (g. 35).
3. Turn anticlockwise the froth regulator to the“INSERT”posi-
tion (g. 35) and pull it o outwards.
35
4. Wash all the components thoroughly with hot water and
mild washing-up liquid. All components are dishwasher
safe, placing them in the top basket of the dishwasher.
Make sure there are no milk residues on the hollow and
groove under the dial (g. 36). If necessary, scrape the
groove with a toothpick.
36 37
5. Rinse inside the froth adjustment dial seat with running
water (g. 37).
6. Check that the intake tube and spout are not clogged with
milk residues.
7. Replace the dial (in correspondence to the word“INSERT”),
spout and milk intake tube.
8. Place the lid back on the milk container.
Cleaning the hot water/steam connection nozzle
Each time you prepare milk, clean the connection nozzle with a
sponge to remove milk residues from the gaskets (g. 24).
DESCALING
Descale the machine when the message “DESCALE” ashes on
the display.
Important!
• Descaler contains acids which may irritate the skin and
eyes. It is vital to respect the manufacturer’s safety warn-
ings given on the descaler pack and the warnings relating
to the procedure to follow in the event of contact with the
skin and eyes.
• You should use De’Longhi descaler only. Using unsuitable
descaler and/or performing descaling incorrectly may re-
sult in faults not covered by the manufacturer’s guarantee.
1. Turn the coee machine on.
2. Press the icon (B2)to enter the menu.
3. Press or (g. 5) until“Descaling”is displayed.
4. Press the icon (g.6),“Conrm?”is displayed. Press the
icon to conrm.
5. EMPTY DRIP TRAY”is displayed, alternating with“REMOVE
FILTER”(if the lter is present) and“Add descaler Press OK”.
6. Empty the water tank (A18) completely and remove the
water softener lter (C4) (if present). Empty the drip tray
(g. 25) and grounds container (A13), then put them back
in the appliance.
38
B
A
7. Pour the descaler into the
tank up to level A(corre-
sponding to a 100 ml
pack) marked on the back
of the tank (g. 38), then
add water (1 litre) up to
level B(g. 38) and put
the water tank back.
8. Place an empty container
with a minimum capacity
of 1.5 litres under the hot
water spout (g. 7).
Important! Danger of burns
Hot water containing acid ows out of the hot water spout.
Avoid contact with splashes of water.
9. Press the icon to conrm that you have added the
solution. The descale programme automatically performs
a series of rinses and pauses to remove limescale deposits
from inside the machine.The message“Descale underway”
is displayed.The descale programme starts and the descal-
er liquid comes out of the water spout.
After about 30 minutes, the messages “RINSING” and “FILL
TANK”alternate on the display.
10. The appliance is now ready for rinsing through with clean
water. Remove the water tank, empty, rinse under running
water, ll with fresh water up to the MAX level and put
back in the appliance: the message “RINSING, Press OK”is
displayed.
11. Empty the container used to collect the descaler solution
and replace it empty under the hot water spout.
12. Press the icon to start rinsing. Hot water ows out
of the spout and the message “RINSING, Please wait” is
displayed.
13. When the water tank is completely empty, the messages
“RINSING”, “REPLACE FILTER” (if previously removed) and
“FILL TANK”alternate on the display.
14. Remove the water tank, replace the lter (if previously re-
moved), ll the tank up to the MAX level with fresh water
and insert it in the appliance: the display will show“RINSE
Press OK”.
15. Empty the container used to collect the rinsing water and
replace it, empty, under the hot water spout;

19
4. Wash all the components thoroughly with hot water and
mild washing-up liquid. All components are dishwasher
safe, placing them in the top basket of the dishwasher.
Make sure there are no milk residues on the hollow and
groove under the dial (g. 36). If necessary, scrape the
groove with a toothpick.
36 37
5. Rinse inside the froth adjustment dial seat with running
water (g. 37).
6. Check that the intake tube and spout are not clogged with
milk residues.
7. Replace the dial (in correspondence to the word“INSERT”),
spout and milk intake tube.
8. Place the lid back on the milk container.
Cleaning the hot water/steam connection nozzle
Each time you prepare milk, clean the connection nozzle with a
sponge to remove milk residues from the gaskets (g. 24).
DESCALING
Descale the machine when the message “DESCALE” ashes on
the display.
Important!
• Descaler contains acids which may irritate the skin and
eyes. It is vital to respect the manufacturer’s safety warn-
ings given on the descaler pack and the warnings relating
to the procedure to follow in the event of contact with the
skin and eyes.
• You should use De’Longhi descaler only. Using unsuitable
descaler and/or performing descaling incorrectly may re-
sult in faults not covered by the manufacturer’s guarantee.
1. Turn the coee machine on.
2. Press the icon (B2)to enter the menu.
3. Press or (g. 5) until“Descaling”is displayed.
4. Press the icon (g.6),“Conrm?”is displayed. Press the
icon to conrm.
5. EMPTY DRIP TRAY”is displayed, alternating with“REMOVE
FILTER”(if the lter is present) and“Add descaler Press OK”.
6. Empty the water tank (A18) completely and remove the
water softener lter (C4) (if present). Empty the drip tray
(g. 25) and grounds container (A13), then put them back
in the appliance.
38
B
A
7. Pour the descaler into the
tank up to level A(corre-
sponding to a 100 ml
pack) marked on the back
of the tank (g. 38), then
add water (1 litre) up to
level B(g. 38) and put
the water tank back.
8. Place an empty container
with a minimum capacity
of 1.5 litres under the hot
water spout (g. 7).
Important! Danger of burns
Hot water containing acid ows out of the hot water spout.
Avoid contact with splashes of water.
9. Press the icon to conrm that you have added the
solution. The descale programme automatically performs
a series of rinses and pauses to remove limescale deposits
from inside the machine.The message“Descale underway”
is displayed.The descale programme starts and the descal-
er liquid comes out of the water spout.
After about 30 minutes, the messages “RINSING” and “FILL
TANK”alternate on the display.
10. The appliance is now ready for rinsing through with clean
water. Remove the water tank, empty, rinse under running
water, ll with fresh water up to the MAX level and put
back in the appliance: the message “RINSING, Press OK”is
displayed.
11. Empty the container used to collect the descaler solution
and replace it empty under the hot water spout.
12. Press the icon to start rinsing. Hot water ows out
of the spout and the message “RINSING, Please wait” is
displayed.
13. When the water tank is completely empty, the messages
“RINSING”, “REPLACE FILTER” (if previously removed) and
“FILL TANK”alternate on the display.
14. Remove the water tank, replace the lter (if previously re-
moved), ll the tank up to the MAX level with fresh water
and insert it in the appliance: the display will show“RINSE
Press OK”.
15. Empty the container used to collect the rinsing water and
replace it, empty, under the hot water spout;
16. Press the icon to restart rinsing: the message ”RINS-
ING Please wait”appears on the display, water is delivered
from the hot water spout and the rinsing cycle nishes
when water is delivered from the coee spout (A8).
Important! Danger of burns.
Do not leave the appliance unattended while hot water is being
delivered.
17. When the water tank is completely empty, the message
“Rinsing Complete, Press OK”is displayed.
18. Press the icon.
19. The message“FILL TANK”appears on the display; when the
tank is lled and replaced the message “Heating please
wait” appears on the display, after which the machine is
ready to use.
Please note!
If the descaling cycle is not completed correctly (e.g. lack of elec-
tricity) we recommend repeating the cycle.
SETTING WATER HARDNESS
The DESCALE message is displayed after a period of time estab-
lished according to water hardness.
The machine is set by default for a hardness value of 4. The ma-
chine can also be programmed according to the hardness of the
mains water in the various regions so that the machine needs to
be descaled less often.
Measuring water hardness
1. Remove the “TOTAL HARDNESS TEST” indicator paper from
its pack (attached to the English instructions).
2. Immerse the paper completely in a glass of water for one
second.
3. Remove the paper from the water and shake lightly. After
about a minute, 1, 2, 3, or 4 red squares form, depending
on the hardness of the water. Each square corresponds to
one level.
soft water
slightly hard
water
hard water
very hard
water
●
● ●
● ● ●
● ● ● ●