DeLonghi PrimaDonna Elite ECAM65 55 Series User manual

De’Longhi Appliances via Seitz, 47 31100 Treviso Italia www.delonghi.com 5713228481/04.16

ECAM65X.55
BEAN TO CUP ESPRESSO
AND CAPPUCCINO
MACHINE
Instruction for use
Instructions videos available at:
http://ecam65055.delonghi.com

2
EN
page 6
D1
B1 B4
D2
D4
B
D
D5
D3
C2
C8
C1
C3
C6
C7
C4
C
C5
10:00
SELECT BEVERAGE
QUANTITY AROMA
B2 B3
B5
B2
B8 B6B7B9
B10
B11
B12
B13
B14
B15
B16
B17
PROFILE 1
A
A5
A2
A1
A4
A7
A3
B
A6
A9
A8
A19
A10
A11
A13
A12
A15
A16
A17
A21
A20
A18
A14

3
D1
B1 B4
D2
D4
B
D
D5
D3
C2
C8
C1
C3
C6
C7
C4
C
C5
10:00
SELECT BEVERAGE
QUANTITY AROMA
B2 B3
B5
B2
B8 B6B7B9
B10
B11
B12
B13
B14
B15
B16
B17
PROFILE 1
A
A5
A2
A1
A4
A7
A3
B
A6
A9
A8
A19
A10
A11
A13
A12
A15
A16
A17
A21
A20
A18
A14

4
43321
8
765
12
1615
9
14
201817
2423
3231
MILK
21 22
19
CLEAN
1110
13
25 26 27 28B
28A
29
PUSH
30
PUSH

5
4
3321
8
765
12
1615
9
14
201817
2423
3231
MILK
21 22
19
CLEAN
1110
13
25 26 27 28B
28A
29
PUSH
30
PUSH

6
1. FUNDAMENTAL SAFETY WARNINGS
• The appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Cleaning and user maintenance shall not be made by children without supervision.
• Never clean by immersing the appliance in water.
• This is an household appliance only.
It is not intended to be used in: sta kitchen areas in shops, oces and other working
environments; farm houses; by clients in hotels, motels and other residential type en-
vironments; bed and breakfast type environments.
• If the plug or cord is damaged, it must be replaced by Customer Services only to avoid
all risk.
FOR EUROPEAN MARKETS ONLY:
• This appliance can be used by children aged from 8 years and above if they have been
given supervision or instruction concerning use of the appliance in a safe way and
understand the hazards involved. User cleaning and maintenance shall not be made
by children unless they are above 8 years old and supervised.
Keep the appliance and power cord away from children under 8 years of age.
• Appliances can be used by persons with reduced physical, sensory or mental capabil-
ities or lack of experience and knowledge if they are supervised or have been given
instruction concerning use of the appliance in a safe way and if they understand the
hazards involved.
• Children shall not play with the appliance.
• Always unplug the appliance when left unattended and before assembly, taking apart
or cleaning.
Surfaces marked with this symbol become hot during use (the symbol is present in
certain models only).
CONTENTS
1. FUNDAMENTAL SAFETY WARNINGS.............7
2. SAFETY WARNINGS ....................................8
2.1 Symbols used in these instructions ...............8
2.2 Designated use..............................................8
2.3 Instruction for Use.........................................8
3. INTRODUCTION..........................................8
3.1 Letters in brackets.........................................8
3.2 Troubleshooting and repairs..........................8
3.3 Download the App! .......................................8
4. DESCRIPTION.............................................9
4.1 Description of the appliance .........................9
4.2 Description of the homepage (main screen)
(page 2 - B )..............................................9
4.3 Description of the accessories........................9
4.4 Description of the milk container ..................9
5. BEFORE USE...............................................9
5.1 Checking the appliance.................................9
5.2 Installing the appliance.................................9
5.3 Connecting the appliance............................10
5.4 Setting up the appliance.............................10
6. TURNING THE APPLIANCE ON.................... 10
7. TURNING THE APPLIANCE OFF .................. 10
8. MENU SETTINGS ...................................... 11
8.1 Rinsing ......................................................11
8.2 Descaling ...................................................11
8.3 Water lter ...............................................11
8.4 Beverages settings ....................................11
8.5 Set time .....................................................11
8.6 Auto-start ..................................................11
8.7 Auto-o (standby) ..................................... 12
8.8 Cup warmer.................................................12
8.9 Energy saving ...........................................12
8.10 Coee temperature ....................................12
8.11 Water hardness ..........................................12
8.12 Selecting the language ..............................13
8.13 Beep ..........................................................13
8.14 Cup lighting ................................................13
8.15 Bluetooth ...................................................13
8.16 Demo mode ..............................................13
8.17 Default values ...........................................13
8.18 Statistics ....................................................14
9. MAKING COFFEE....................................... 14
9.1 Selecting the coee aroma..........................14
9.2 Selecting the coee quantity ......................14
9.3 Adjusting the coee mill.............................14
9.4 Tips for a hotter coee.................................14
9.5 Making coee using coee beans ...............14
9.6 Making coee using ground coee .............15
10. MAKING CAPPUCCINOS AND MILKBASED
COFFEES.................................................. 15
10.1 Filling and attaching the milk container......15
10.2 Adjusting the amount of froth.....................16
10.3 Making cappuccino and milk based.............16
10.4 Cleaning the milk container after use..........16
11. DELIVERING HOT WATER .......................... 17
12. STEAM DELIVERY ..................................... 17
12.1 Tips for using steam to froth milk................17
12.2 Clean the hot water/steam spout after use .17
13. CUSTOMISING THE BEVERAGES ................ 17
14. MEMORISING YOUR PERSONAL PROFILE.... 18
15. CLEANING................................................ 18
15.1 Cleaning the machine .................................18
15.2 Cleaning the machine’s internal circuit........18
15.3 Cleaning the coee grounds container........18
15.4 Cleaning the drip tray..................................19
15.5 Cleaning the inside of the coee machine..19
15.6 Cleaning the water tank..............................19
15.7 Cleaning the coee spouts..........................19
15.8 Cleaning the ground coee funnel..............19
15.9 Cleaning the infuser....................................19
15.10Cleaning the milk container ........................20
15.11Cleaning the hot water/steam connection
nozzle..........................................................20
16. DESCALING.............................................. 20
17. SETTING WATER HARDNESS...................... 22
17.1 Measuring water hardness..........................22
17.2 Setting water hardness .............................22
18. WATER SOFTENER FILTER ......................... 22
18.1 Installing the lter ......................................22
18.2 Replacing the lter......................................23
18.3 Removing the lter.....................................23
19. TECHNICAL DATA...................................... 23
20. DISPOSING OF THE APPLIANCE ................. 23
21. DISPLAYED MESSAGES.............................. 24
22. TROUBLESHOOTING ................................. 28
23. ELECTRICAL REQUIREMENTS UK ONLY..... 29

7
1. FUNDAMENTAL SAFETY WARNINGS
• The appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Cleaning and user maintenance shall not be made by children without supervision.
• Never clean by immersing the appliance in water.
• This is an household appliance only.
It is not intended to be used in: sta kitchen areas in shops, oces and other working
environments; farm houses; by clients in hotels, motels and other residential type en-
vironments; bed and breakfast type environments.
• If the plug or cord is damaged, it must be replaced by Customer Services only to avoid
all risk.
FOR EUROPEAN MARKETS ONLY:
• This appliance can be used by children aged from 8 years and above if they have been
given supervision or instruction concerning use of the appliance in a safe way and
understand the hazards involved. User cleaning and maintenance shall not be made
by children unless they are above 8 years old and supervised.
Keep the appliance and power cord away from children under 8 years of age.
• Appliances can be used by persons with reduced physical, sensory or mental capabil-
ities or lack of experience and knowledge if they are supervised or have been given
instruction concerning use of the appliance in a safe way and if they understand the
hazards involved.
• Children shall not play with the appliance.
• Always unplug the appliance when left unattended and before assembly, taking apart
or cleaning.
Surfaces marked with this symbol become hot during use (the symbol is present in
certain models only).
10. MAKING CAPPUCCINOS AND MILKBASED
COFFEES.................................................. 15
10.1 Filling and attaching the milk container......15
10.2 Adjusting the amount of froth.....................16
10.3 Making cappuccino and milk based.............16
10.4 Cleaning the milk container after use..........16
11. DELIVERING HOT WATER .......................... 17
12. STEAM DELIVERY ..................................... 17
12.1 Tips for using steam to froth milk................17
12.2 Clean the hot water/steam spout after use .17
13. CUSTOMISING THE BEVERAGES ................ 17
14. MEMORISING YOUR PERSONAL PROFILE.... 18
15. CLEANING................................................ 18
15.1 Cleaning the machine .................................18
15.2 Cleaning the machine’s internal circuit........18
15.3 Cleaning the coee grounds container........18
15.4 Cleaning the drip tray..................................19
15.5 Cleaning the inside of the coee machine..19
15.6 Cleaning the water tank..............................19
15.7 Cleaning the coee spouts..........................19
15.8 Cleaning the ground coee funnel..............19
15.9 Cleaning the infuser....................................19
15.10Cleaning the milk container ........................20
15.11Cleaning the hot water/steam connection
nozzle..........................................................20
16. DESCALING.............................................. 20
17. SETTING WATER HARDNESS...................... 22
17.1 Measuring water hardness..........................22
17.2 Setting water hardness .............................22
18. WATER SOFTENER FILTER ......................... 22
18.1 Installing the lter ......................................22
18.2 Replacing the lter......................................23
18.3 Removing the lter.....................................23
19. TECHNICAL DATA...................................... 23
20. DISPOSING OF THE APPLIANCE ................. 23
21. DISPLAYED MESSAGES.............................. 24
22. TROUBLESHOOTING ................................. 28
23. ELECTRICAL REQUIREMENTS UK ONLY..... 29

8
In the App, you can also nd information, tips and curious facts
about the world of coee, together with information on your
machine at your ngertips.
This symbol highlights the functions you can control or
consult using the App.
You can also create up to 6 new beverages and save them in your
appliance.
Please note:
Check compatible devices on“PrimaDonnaElite.delonghi.com”.
4. DESCRIPTION
4.1 Description of the appliance
(page 3 - A )
A1. Beans container lid
A2. Ground coee funnel lid
A3. Beans container
A4. Ground coee funnel
A5. Grinding adjustment dial
A6. Cup warmer shelf
A7. button: to turn the appliance on and o (standby)
A8. Coee spouts (adjustable height)
A9. Hot water and steam connection nozzle
A10. Coee grounds container
A11. Cup tray
A12. Drip tray water level indicator
A13. Drip tray grille
A14. Drip tray
A15. Water tank lid
A16. Water tank
A17. Water softener lter housing
A18. Infuser door
A19. Infuser
A20. Power cord connector socket
A21. Main switch (ON/OFF)
4.2 Description of the homepage (main screen)
(page 2 - B )
B1. Display
B2. Selection arrows
B3. Beverage selection menu (other than directly selected
beverages): CAPPUCCINO+, FLATWHITE, CAPPUCCINO MIX,
ESPRESSO MACCHIATO, HOT WATER, X2 ESPRESSO, STEAM;
B4. Customisable proles (see )
B5. Aroma selection
B6. : menu to customise the beverages settings
B7. Default settings selected
B8. : appliance settings menu
B9. Quantity selection
2. SAFETY WARNINGS
2.1 Symbols used in these instructions
Important warnings are identied by these symbols.
It is vital to respect these warnings.
Danger!
Failure to observe the warning may result in life threatening
injury by electric shock.
Important!
Failure to observe the warning could result in injury or damage
to the appliance.
Danger of burns!
Failure to observe the warning could result in scalds or burns.
Please note:
This symbol identies important advice or information for the
user.
Danger!
This is an electrical appliance and may cause electric shock.
You should therefore follow these safety warnings:
• Never touch the appliance with damp hands or feet.
• Never touch the plug with damp hands.
• Make sure the socket used is freely accessible at all times,
enabling the appliance to be unplugged when necessary.
• Unplug directly from the plug only.
Never pull the cord as you could damage it.
• To disconnect the appliance completely you must unplug it
from the mains socket.
• If the appliance is faulty, do not attempt to repair.
Turn it o, unplug from the mains socket and contact Cus-
tomer Services.
• Before cleaning the appliance, turn it o, unplug from the
mains socket and allow to cool.
Important:
Keep all packaging (plastic bags, polystyrene foam) away from
children.
Danger of burns!
This appliance produces hot water and steam may form while
it is in operation.
Avoid contact with splashes of water or hot steam.
When the appliance is in operation, the cup shelf could become
very hot.
2.2 Designated use
This appliance is designed and made to prepare coee and milk
and heat beverages.
Any other use is considered improper and thus dangerous.
The manufacturer is not liable for damage deriving from im-
proper use of the appliance.
2.3 Instruction for Use
ReadthisInstructionforUsecarefullybeforeusing theappliance.
Failure to follow this Instruction for Use may result in burns or
damage to the appliance.
The manufacturer is not liable for damage deriving from failure
to respect this Instruction for Use.
Please note:
Keep this Instruction for Use.
If the appliance is passed to other persons, they must also be
provided with this Instruction for Use.
3. INTRODUCTION
Thank you for choosing this bean to cup espresso and cappuc-
cino machine.
Take a few minutes to read this Instruction for Use.
This will avoid all risks and damage to the appliance.
3.1 Letters in brackets
The letters in brackets refer to the legend in the description of
the appliance on pages 2-3.
3.2 Troubleshooting and repairs
In the event of problems, rst try and resolve them by reading
the information given in sections “21. Displayed messages” and
“22. Troubleshooting”.
If this does not resolve the problem or you require further in-
formation, you should consult Customer Services by calling the
number given on the annexed“Customer Service”sheet.
If your country is not among those listed on the sheet, call the
number given in the guarantee.
If repairs are required, contact De’Longhi Customer Services
only.
The addresses are given in the guarantee certicate provided
with the machine
3.3 Download the App!
A number of functions can be controlled remotely using the
De’Longhi Coee Link App.

9
In the App, you can also nd information, tips and curious facts
about the world of coee, together with information on your
machine at your ngertips.
This symbol highlights the functions you can control or
consult using the App.
You can also create up to 6 new beverages and save them in your
appliance.
Please note:
Check compatible devices on“PrimaDonnaElite.delonghi.com”.
4. DESCRIPTION
4.1 Description of the appliance
(page 3 - A )
A1. Beans container lid
A2. Ground coee funnel lid
A3. Beans container
A4. Ground coee funnel
A5. Grinding adjustment dial
A6. Cup warmer shelf
A7. button: to turn the appliance on and o (standby)
A8. Coee spouts (adjustable height)
A9. Hot water and steam connection nozzle
A10. Coee grounds container
A11. Cup tray
A12. Drip tray water level indicator
A13. Drip tray grille
A14. Drip tray
A15. Water tank lid
A16. Water tank
A17. Water softener lter housing
A18. Infuser door
A19. Infuser
A20. Power cord connector socket
A21. Main switch (ON/OFF)
4.2 Description of the homepage (main screen)
(page 2 - B )
B1. Display
B2. Selection arrows
B3. Beverage selection menu (other than directly selected
beverages): CAPPUCCINO+, FLATWHITE, CAPPUCCINO MIX,
ESPRESSO MACCHIATO, HOT WATER, X2 ESPRESSO, STEAM;
B4. Customisable proles (see )
B5. Aroma selection
B6. : menu to customise the beverages settings
B7. Default settings selected
B8. : appliance settings menu
B9. Quantity selection
Directly selected beverages:
B10. CAPPUCCINO
B11. LATTE MACCHIATO
B12. CAFFELATTE
B13. HOT MILK
B14. ESPRESSO
B15. COFFEE
B16. LONG
B17. DOPPIO+
4.3 Description of the accessories
(page 2 - C )
C1. “Total Hardness Test”indicator paper
C2. Ground coee measure
C3. Descaler
C4. Water softener lter (certain models only)
C5. Cleaning brush
C6. Hot water/steam spout
C7. Spout release button
C8. Power cord
4.4 Description of the milk container
(page 2 - D )
D1. Froth adjustment and CLEAN dial
D2. Milk container lid
D3. Milk container
D4. Milk intake tube
D5. Frothed milk spout (adjustable)
5. BEFORE USE
5.1 Checking the appliance
After removing the packaging, make sure the product is com-
plete and undamaged and that all accessories are present.
Do not use the appliance if it is visibly damaged.
Contact De’Longhi Customer Services.
5.2 Installing the appliance
Important!
When you install the appliance, you should respect the follow-
ing safety warnings:
• The appliance gives o heat.
After positioning the appliance on the worktop, leave a
space of at least 3 cm between the surfaces of the appli-
ance and the side and rear walls and at least 15 cm above
the coee maker.
• Water penetrating the coee machine could cause
damage.
Do not place the appliance near taps or sinks.
The manufacturer is not liable for damage deriving from im-
proper use of the appliance.
2.3 Instruction for Use
ReadthisInstructionforUsecarefullybeforeusing theappliance.
Failure to follow this Instruction for Use may result in burns or
damage to the appliance.
The manufacturer is not liable for damage deriving from failure
to respect this Instruction for Use.
Please note:
Keep this Instruction for Use.
If the appliance is passed to other persons, they must also be
provided with this Instruction for Use.
3. INTRODUCTION
Thank you for choosing this bean to cup espresso and cappuc-
cino machine.
Take a few minutes to read this Instruction for Use.
This will avoid all risks and damage to the appliance.
3.1 Letters in brackets
The letters in brackets refer to the legend in the description of
the appliance on pages 2-3.
3.2 Troubleshooting and repairs
In the event of problems, rst try and resolve them by reading
the information given in sections “21. Displayed messages” and
“22. Troubleshooting”.
If this does not resolve the problem or you require further in-
formation, you should consult Customer Services by calling the
number given on the annexed“Customer Service”sheet.
If your country is not among those listed on the sheet, call the
number given in the guarantee.
If repairs are required, contact De’Longhi Customer Services
only.
The addresses are given in the guarantee certicate provided
with the machine
3.3 Download the App!
A number of functions can be controlled remotely using the
De’Longhi Coee Link App.

10
• The appliance could be damaged if the water it contains
freezes.
Do not install the appliance in a room where the tempera-
ture could drop below freezing point.
• Arrange the cord in such a way that it cannot be damaged
by sharp edges or contact with hot surfaces (e.g. electric
hot plates).
5.3 Connecting the appliance
Important!
Check that the mains power supply voltage corresponds to that
indicated on the rating plate on the bottom of the appliance.
Connect the appliance to a correctly installed and eciently
earthed socket with a minimum current rating of 10A only.
If the power socket does not match the plug on the appliance,
have the socket replaced with a suitable type by a qualied
electrician.
5.4 Setting up the appliance
Please note!
• Coee has been used to factory test the appliance and it is
therefore completely normal for there to be traces of coee
in the mill.
The machine is, however, guaranteed to be new.
• You should customise water hardness as soon as possible
following the instructions in section “17. Setting water
hardness”.
1. Plug the power cord (C8) connector into the socket (A20) at
the back of the appliance and connect the appliance to the
mains electricity supply (g. 1). Make sure the main switch
(A21) at the back of the appliance is pressed (g. 2);
2. “SELECT LANGUAGE”: Press the selection arrow (B2) corre-
sponding to the required language;
Follow the instructions indicated on the appliance display:
3. “FILL TANK WITH FRESH WATER”: remove the water tank
(A16) (g. 3), open the lid (A15) (g. 4), ll to the MAX line
with fresh water (g. 5), close the lid and put the tank back
in the appliance (g. 6);
4. “INSERT WATER SPOUT”: Check that the hot water/steam
spout (C6) is inserted on the connection nozzle (A9) (g. 7)
and place a container holding a minimum of 100 ml under-
neath (g. 8);
5. “WATER CIRCUIT EMPTY PRESS OK TO START” appears on
the display;
6. Press the“OK ”button to conrm. The appliance deliv-
ers hot water from the hot water spout (g. 8) then goes
o automatically.
The coee machine is now ready for normal use.
Please note!
• The rst time you use the coee maker, you need to make
4/5 cups of coee or 4/5 cappuccinos before it starts to give
satisfactory results.
• When making the rst 5-6 cappuccinos, it is normal to hear
the noise of boiling water. After this, the noise becomes
less.
• To improve the performance of your appliance, we recom-
mend installing a water softener lter (C4) as described in
section .
If your model is not provided with a lter, you can request
one from De’Longhi Customer Services.
6. TURNING THE APPLIANCE ON
Please note!
Before turning the appliance on, make sure the main switch
(A21) is pressed (g. 2).
Each time the appliance is turned on, it performs an automatic
preheat and rinse cycle which cannot be interrupted.
The appliance is ready for use only after completion of this cycle.
Danger of burns!
During rinsing, a little hot water comes out of the coee spouts
(A8) and is collected in the drip tray (A14) underneath.
Avoid contact with splashes of water.
• To turn the appliance on, press the button (A7-g.
9). The message “HEATING UP UNDERWAY PLEASE WAIT”
appears on the display.
As well as heating the boiler, this also heats the internal circuits
by circulating hot water.
The appliance is at temperature when the main screen (home-
page) appears.
7. TURNING THE APPLIANCE OFF
Whenever the coee machine is turned o after being used to
make coee, it performs an automatic rinse cycle.
Danger of burns!
During rinsing, a little hot water ows from the coee spouts
(A8). Avoid contact with splashes of water.
• To turn the appliance o, press the button (A7-g.
9).
• The message “TURNING OFF UNDERWAY, PLEASE WAIT”
is displayed, then the appliance performs a rinse cycle and
goes o (standby).
Please note!
If you will not be using the appliance for some time, unplug
from the mains socket:
• rst turn the appliance o by pressing the button
(g. 9);
• release the main switch (A21) at the back of the appliance
(g. 2).
Important!
Never press the main switch while the appliance is on.
8. MENU SETTINGS
8.1 Rinsing
Use this function to deliver hot water from the coee spouts
(A8) and hot water/steam spout (C6), if inserted, to clean and
heat the appliance’s internal circuit.
Place a container with a minimum capacity of 100ml under the
coee and hot water spouts (g. 8).
To enable the function, proceed as follows:
1. Press the selection arrow (B2) corresponding to the“ ”
symbol (B8) to enter the menu;
2. Press the selection arrow corresponding to“ RINSING”;
Important! Danger of burns.
Do not leave the appliance unattended while hot water is being
delivered.
3. After a few seconds, hot water is delivered rst from the
coee spouts, then from the hot water/steam spout (if
inserted) to clean and heat the appliance’s internal circuit.
“RINSING underway”appears on the display, together with
a progress bar which lls gradually as preparation proceeds;
4. To interrupt rinsing, press the selection arrow corresponding
to “STOP ”or wait for rinsing to stop automatically.
Please note!
• If the appliance is not used for more than 3-4 days, when
switched on again, we strongly recommend performing
2/3 rinses before use;
• After cleaning, it is normal for the coee grounds container
(A10) to contain water.
8.2 Descaling
For instructions on descaling, see section“16. Descaling”.
8.3 Water lter
For instructions on how to install the lter (C4), see section “18.
Water softener lter”.
8.4 Beverages settings
In this section, you can consult your customised settings and, if
you wish, reset the default values for each beverage.

11
Please note!
• The rst time you use the coee maker, you need to make
4/5 cups of coee or 4/5 cappuccinos before it starts to give
satisfactory results.
• When making the rst 5-6 cappuccinos, it is normal to hear
the noise of boiling water. After this, the noise becomes
less.
• To improve the performance of your appliance, we recom-
mend installing a water softener lter (C4) as described in
section .
If your model is not provided with a lter, you can request
one from De’Longhi Customer Services.
6. TURNING THE APPLIANCE ON
Please note!
Before turning the appliance on, make sure the main switch
(A21) is pressed (g. 2).
Each time the appliance is turned on, it performs an automatic
preheat and rinse cycle which cannot be interrupted.
The appliance is ready for use only after completion of this cycle.
Danger of burns!
During rinsing, a little hot water comes out of the coee spouts
(A8) and is collected in the drip tray (A14) underneath.
Avoid contact with splashes of water.
• To turn the appliance on, press the button (A7-g.
9). The message “HEATING UP UNDERWAY PLEASE WAIT”
appears on the display.
As well as heating the boiler, this also heats the internal circuits
by circulating hot water.
The appliance is at temperature when the main screen (home-
page) appears.
7. TURNING THE APPLIANCE OFF
Whenever the coee machine is turned o after being used to
make coee, it performs an automatic rinse cycle.
Danger of burns!
During rinsing, a little hot water ows from the coee spouts
(A8). Avoid contact with splashes of water.
• To turn the appliance o, press the button (A7-g.
9).
• The message “TURNING OFF UNDERWAY, PLEASE WAIT”
is displayed, then the appliance performs a rinse cycle and
goes o (standby).
Please note!
If you will not be using the appliance for some time, unplug
from the mains socket:
• rst turn the appliance o by pressing the button
(g. 9);
• release the main switch (A21) at the back of the appliance
(g. 2).
Important!
Never press the main switch while the appliance is on.
8. MENU SETTINGS
8.1 Rinsing
Use this function to deliver hot water from the coee spouts
(A8) and hot water/steam spout (C6), if inserted, to clean and
heat the appliance’s internal circuit.
Place a container with a minimum capacity of 100ml under the
coee and hot water spouts (g. 8).
To enable the function, proceed as follows:
1. Press the selection arrow (B2) corresponding to the“ ”
symbol (B8) to enter the menu;
2. Press the selection arrow corresponding to“ RINSING”;
Important! Danger of burns.
Do not leave the appliance unattended while hot water is being
delivered.
3. After a few seconds, hot water is delivered rst from the
coee spouts, then from the hot water/steam spout (if
inserted) to clean and heat the appliance’s internal circuit.
“RINSING underway”appears on the display, together with
a progress bar which lls gradually as preparation proceeds;
4. To interrupt rinsing, press the selection arrow corresponding
to “STOP ”or wait for rinsing to stop automatically.
Please note!
• If the appliance is not used for more than 3-4 days, when
switched on again, we strongly recommend performing
2/3 rinses before use;
• After cleaning, it is normal for the coee grounds container
(A10) to contain water.
8.2 Descaling
For instructions on descaling, see section“16. Descaling”.
8.3 Water lter
For instructions on how to install the lter (C4), see section “18.
Water softener lter”.
8.4 Beverages settings
In this section, you can consult your customised settings and, if
you wish, reset the default values for each beverage.
1. Press the selection arrow (B2) corresponding to the “
” symbol (B8) to enter the menu;
2. Scroll through the menu items by pressing the selection
arrow corresponding to “NEXT>” until “ BEVERAGES
SETTINGS”appears on the display;
3. The values for the rst beverage appear on the display;
4. The reference user prole is highlighted on the display. The
values are displayed on vertical bars. The default value is
indicated by the symbol, while the current value is
highlighted by the solid part of the vertical bar;
5. To go back to the settings menu, press the selection arrow
corresponding to “ESC”. To scroll through and display
the beverages, press the selection arrow corresponding to
“NEXT>”;
6. To reset the default values for the beverage displayed,
press the selection arrow corresponding to “ RESET”;
7. “CONFIRM RESET?”: to conrm press the selection arrow
corresponding to “ OK ” (to cancel, press the selection
arrow corresponding to“ ESC”);
8. “DEFAULT VALUES SET”: press“ OK ” .
The beverage has been reset to the default values. Proceed with
the other beverages or go back to the homepage by pressing the
arrow corresponding to “ ESC”twice.
8.5 Set time
To adjust the time on the display (B1), proceed as follows:
1. Press the selection arrow (B2) corresponding to the “
” symbol (B8) to enter the menu
2. Scroll through the menu items by pressing the selection
arrow corresponding to “NEXT>” until “ SET TIME”
appears on the display;
3. Press the selection arrow corresponding to“ SET TIME”.
The time setting panel appears on the display;
4. Adjust the time by pressing the selection arrows corre-
sponding to (increase) or (decrease) for the
hours (H) and minutes (MIN);
5. To conrm, press the selection arrow corresponding to “OK ”
(to cancel, press the selection arrow corresponding to “
ESC”) and press the selection arrow corresponding to “
ESC”to go back to the homepage.
The time is now set.
8.6 Auto-start
You can set the auto-start time in order to have the appliance
ready at a certain time (for example in the morning) so you can
make coee immediately.
Please note!
To enable this function, the time must already be set correctly
(see section“8.5 Set time ”).

12
To enable auto-start, proceed as follows:
1. Press the selection arrow (B2) corresponding to the“ ”
symbol (B8) to enter the menu;
2. Scroll through the menu items by pressing the selection
arrow corresponding to “NEXT>” until “AUTOSTART
”appears on the display;
3. Press the selection arrow corresponding to “AUTOSTART
”. Disable (or enable) the function by pressing the se-
lection arrow corresponding to (or );
4. Press the selection arrow corresponding to“SETTIME ”.
The time setting panel appears on the display (B1);
5. Adjust the time by pressing the selection arrows corre-
sponding to (increase) or (decrease) for the
hours (H) and minutes (MIN);
6. To conrm, press the selection arrow corresponding to “OK
”;
7. Press the selection arrow corresponding to “ ESC”twice
to go back to the homepage.
The auto-start time is now set and the corresponding symbol is
displayed to indicate that the function has been enabled.
Please note!
When the appliance is turned o using the main switch, the au-
to-start setting (if enabled) is lost.
8.7 Auto-o (standby)
Auto-o can be set so that the appliance goes o after 15 or 30
minutes, or 1, 2 or 3 hours.
To programme Auto-o, proceed as follows:
1. Press the selection arrow (B2) corresponding to the“ ”
symbol (B8) to enter the menu;
2. Scroll through the menu items by pressing the selection
arrow corresponding to “NEXT>” until “AUTO-OFF ”
appears on the display;
3. Press the selection arrow corresponding to “AUTO-OFF
”;
4. Select the required time interval by pressing the selection
arrows corresponding to (increase) or decrease)
the value;
5. To conrm, press the selection arrow corresponding to “OK
”;
6. Press the selection arrow corresponding to “ ESC”to go
back to the homepage.
Auto-o is now programmed.
8.8 Cup warmer
To warm the cups before making coee, you can enable the cup
warmer (A6) and rest the cups on the shelf.
1. Press the selection arrow (B2) corresponding to the “
”symbol (B8) to enter the menu;
2. Scroll through the menu items by pressing the selection
arrow corresponding to “NEXT>” until “CUP WARMER”
appears on the display;
3. Press the selection arrow corresponding to “CUP WARMER”
to disable ( ) or enable ( ) the function.
4. Press the selection arrow corresponding to“ ESC”to go
back to the homepage.
8.9 Energy saving
Use this function to enable or disable energy saving.
When enabled, the function reduces energy consumption in
compliance with European regulations.
To disable or enable“Energy Saving”, proceed as follows:
1. Press the selection arrow (B2) corresponding to the“ ”
symbol (B8) to enter the menu;
2. Scroll through the menu items by pressing the selection
arrow corresponding to “NEXT>” until “ENERGY SAVING”
appears on the display;
3. Press the selection arrow corresponding to“ENERGY SAVING”
to disable ( ) or enable ( ) the function.
4. Press the selection arrow corresponding to “ ESC”to go
back to the homepage.
8.10 Coee temperature
To modify the temperature of the water used to make the coee,
proceed as follows:
1. Press the selection arrow (B2) corresponding to the“ ”
symbol (B8) to enter the menu;
2. Scroll through the menu items by pressing the selection
arrow corresponding to“NEXT>”until “COFFEE TEMPER-
ATURE“ appears on the display;
3. Press the selection arrow corresponding to “COFFEE TEM-
PERATURE“. The selectable values appear on the display (B1)
(the current value is underlined);
4. Press the selection arrow corresponding to the value you want
to set (LOW, MEDIUM, HIGH, MAXIMUM);
5. Press the selection arrow corresponding to“ ESC”twice
to go back to the homepage.
Please note!
A dierent temperature can be set for each prole (see section
“14. Memorising your personal prole”).
8.11 Water hardness
For instructions on setting water hardness, see section “17. Set-
ting water hardness”.
8.12 Selecting the language
To modify the language of the display (B1), proceed as follows:
1. Press the selection arrow (B2) corresponding to the“ ”
symbol (B8) to enter the menu;
2. Scroll through the menu items by pressing the selection
arrow corresponding to“NEXT>”until“SET LANGUAGE
”appears on the display;
3. Press the selection arrow corresponding to “SET LAN-
GUAGE ”;
4. Press the selection arrow corresponding to the language re-
quired (press the selection arrow corresponding to“>NEXT”
to display all the languages available);
5. Press the selection arrow corresponding to“ ESC”twice
to go back to the homepage.
8.13 Beep
This enables or disables the beep emitted by the machine each
time an icon is pressed or an accessory is inserted/removed.
To disable or enable the beep, proceed as follows:
1. Press the selection arrow (B2) corresponding to the“ ”
symbol (B8) to enter the menu;
2. Scroll through the menu items by pressing the selection
arrow corresponding to “NEXT>” until “BEEP” appears on
the display;
3. Press the selection arrow corresponding to“BEEP”to disable
( ) or enable ( ) the function;
4. Press the selection arrow corresponding to “ ESC”to go
back to the homepage.
8.14 Cup lighting
This function enables or disables the cup lights. The lighting is
enabled by default.
The lights come on each time a coee or milk-based beverage is
made and during each rinsing cycle.
To disable or enable this function, proceed as follows:
1. Press the selection arrow (B2) corresponding to the“ ”
symbol (B8) to enter the menu;
2. Scroll through the menu items by pressing the selection
arrow corresponding to “NEXT>” until “CUP LIGHTING”
appears on the display;
3. Press the selection arrow corresponding to“CUP LIGHTING”
to disable ( ) or enable ( ) the function;
4. Press the selection arrow corresponding to “ ESC”to go
back to the homepage.
8.15 Bluetooth
This function enables or disables the protection PIN to connect to
the appliance from a device.

13
1. Press the selection arrow (B2) corresponding to the “
”symbol (B8) to enter the menu;
2. Scroll through the menu items by pressing the selection
arrow corresponding to “NEXT>” until “CUP WARMER”
appears on the display;
3. Press the selection arrow corresponding to “CUP WARMER”
to disable ( ) or enable ( ) the function.
4. Press the selection arrow corresponding to“ ESC”to go
back to the homepage.
8.9 Energy saving
Use this function to enable or disable energy saving.
When enabled, the function reduces energy consumption in
compliance with European regulations.
To disable or enable“Energy Saving”, proceed as follows:
1. Press the selection arrow (B2) corresponding to the“ ”
symbol (B8) to enter the menu;
2. Scroll through the menu items by pressing the selection
arrow corresponding to “NEXT>” until “ENERGY SAVING”
appears on the display;
3. Press the selection arrow corresponding to“ENERGY SAVING”
to disable ( ) or enable ( ) the function.
4. Press the selection arrow corresponding to “ ESC”to go
back to the homepage.
8.10 Coee temperature
To modify the temperature of the water used to make the coee,
proceed as follows:
1. Press the selection arrow (B2) corresponding to the“ ”
symbol (B8) to enter the menu;
2. Scroll through the menu items by pressing the selection
arrow corresponding to“NEXT>”until “COFFEE TEMPER-
ATURE“ appears on the display;
3. Press the selection arrow corresponding to “COFFEE TEM-
PERATURE“. The selectable values appear on the display (B1)
(the current value is underlined);
4. Press the selection arrow corresponding to the value you want
to set (LOW, MEDIUM, HIGH, MAXIMUM);
5. Press the selection arrow corresponding to“ ESC”twice
to go back to the homepage.
Please note!
A dierent temperature can be set for each prole (see section
“14. Memorising your personal prole”).
8.11 Water hardness
For instructions on setting water hardness, see section “17. Set-
ting water hardness”.
8.12 Selecting the language
To modify the language of the display (B1), proceed as follows:
1. Press the selection arrow (B2) corresponding to the“ ”
symbol (B8) to enter the menu;
2. Scroll through the menu items by pressing the selection
arrow corresponding to“NEXT>”until“SET LANGUAGE
”appears on the display;
3. Press the selection arrow corresponding to “SET LAN-
GUAGE ”;
4. Press the selection arrow corresponding to the language re-
quired (press the selection arrow corresponding to“>NEXT”
to display all the languages available);
5. Press the selection arrow corresponding to“ ESC”twice
to go back to the homepage.
8.13 Beep
This enables or disables the beep emitted by the machine each
time an icon is pressed or an accessory is inserted/removed.
To disable or enable the beep, proceed as follows:
1. Press the selection arrow (B2) corresponding to the“ ”
symbol (B8) to enter the menu;
2. Scroll through the menu items by pressing the selection
arrow corresponding to “NEXT>” until “BEEP” appears on
the display;
3. Press the selection arrow corresponding to“BEEP”to disable
( ) or enable ( ) the function;
4. Press the selection arrow corresponding to “ ESC”to go
back to the homepage.
8.14 Cup lighting
This function enables or disables the cup lights. The lighting is
enabled by default.
The lights come on each time a coee or milk-based beverage is
made and during each rinsing cycle.
To disable or enable this function, proceed as follows:
1. Press the selection arrow (B2) corresponding to the“ ”
symbol (B8) to enter the menu;
2. Scroll through the menu items by pressing the selection
arrow corresponding to “NEXT>” until “CUP LIGHTING”
appears on the display;
3. Press the selection arrow corresponding to“CUP LIGHTING”
to disable ( ) or enable ( ) the function;
4. Press the selection arrow corresponding to “ ESC”to go
back to the homepage.
8.15 Bluetooth
This function enables or disables the protection PIN to connect to
the appliance from a device.
1. Press the selection arrow (B2) corresponding to the“ ”
symbol (B8) to enter the menu;
2. Scroll through the menu items by pressing the selection
arrow corresponding to “NEXT>” until “ BLUETOOTH”
appears on the display;
3. Press the selection arrow corresponding to “ BLUETOOTH” .
The serial number of the machine (19 digits) and a 4 digit
number (PIN) appear on the display (B1);
4. Press the selection arrow to disable ( ) or enable ( )
the request for the PIN when you connect via the APP;
5. Press the selection arrow corresponding to“ ESC”twice
to go back to the homepage.
The preset PIN is“0000”. You are recommended to customise the
PIN directly from the APP.
Please note!
The serial number of the appliance enables it to be identied un-
ambiguously when an association is created with the APP.
8.16 Demo mode
When this mode is enabled, the appliance’s main functions are
illustrated on the display:
1. Press the selection arrow (B2) corresponding to the“ ”
symbol (B8) to enter the menu;
2. Scroll through the menu items by pressing the selection
arrow corresponding to “NEXT>” until “ DEMO
MODE”appears on the display;
3. Press the selection arrow corresponding to “ DEMO
MODE”. The demo begins;
4. Press the selection arrow corresponding to “ ESC”twice
to go back to the homepage.
8.17 Default values
This resets all menu settings and programmed quantities back
to the default values (with the exception of the language which
remains as set).
To reset the default values, proceed as follows:
1. Press the selection arrow (B2) corresponding to the“ ”
symbol (B8) to enter the menu;
2. Scroll through the menu items by pressing the selection
arrow corresponding to“NEXT>”until“ DEFAULT VAL-
UES”appears on the display;
3. “RESET DEFAULT VALUES?”: to conrm press the selection
arrow corresponding to “OK ”(to cancel, press the selec-
tion arrow corresponding to“ ESC”);
4. “DEFAULT VALUES SET”: Press the selection arrow corre-
sponding to “OK ” to conrm;
5. Press the selection arrow corresponding to“ESC”to go
back to the homepage.

14
8.18 Statistics
This displays statistics relating to the machine.
To display the statistics, proceed as follows:
1. Press the selection arrow (B2) corresponding to the“ ”
symbol (B8) to enter the menu;
2. Scroll through the menu items by pressing the selection
arrow corresponding to “NEXT>” until “ STATISTICS”
appears on the display;
3. Press the selection arrow corresponding to “ STATIS-
TICS” and check all the statistics by scrolling through the
items using the selection arrow corresponding to “NEXT>”;
4. Press“ ESC”twice to go back to the homepage.
9. MAKING COFFEE
9.1 Selecting the coee aroma
Select the required coee aroma by pressing the selection arrow
(B2) corresponding to“AROMA”(B5):
(see “9.6 Making coee
using ground coee”)
X-LIGHT
LIGHT
MEDIUM
STRONG
X-STRONG
Custom (if programmed) /
Standard
9.2 Selecting the coee quantity
Select the required quantity by pressing the selection arrow (B2)
corresponding to“QUANTITY”(B9):
SMALL SIZE
MEDIUM SIZE
LARGE SIZE
EXTRA LARGE SIZE
Custom quantity (if pro-
grammed) / Standard
quantity
9.3 Adjusting the coee mill
The coee mill is set by default to prepare coee correctly and
should not require regulating initially.
However, if after making the rst few coees you nd that the
coee is either too weak and not creamy enough or delivery is
too slow (a drop at a time), this can be corrected by adjusting
the grinding adjustment dial (A5 - g. 10).
Please note!
The grinding adjustment dial must only be turned when the
coee mill is in operation.
If the coee is delivered too slowly or not
at all, turn one click clockwise towards 7.
For fuller bodied creamier coee, turn
one click anticlockwise towards 1 (do
not turn more than one click at a time
otherwise the coee could be delivered
a drop at a time).
These adjustments will only be evident after at least 2 cups of
coee have been delivered.
If this adjustment does not obtain the desired result, turn the
dial another click.
9.4 Tips for a hotter coee
For hotter coee, you should:
• perform a rinse cycle by selecting the“Rinsing”function in
the settings menu (section “8.1 Rinsing ”);
• warm the cups with hot water using the hot water function
(see section“11. Delivering hot water”);
• increase the coee temperature in the settings menu (see
section“8.10 Coee temperature ”).
9.5 Making coee using coee beans
Important!
Do not use caramelised or candied coee beans as they could
stick to the coee mill and make it unusable.
1. Fill the container (A3) (g. 11) with coee beans;
2. Place a cup under the coee spouts (A8);
3. Lower the spouts as near as possible to the cup (g. 12).
This makes a creamier coee;
4. Then select your required coee:
- ESPRESSO B14)
 COFFEE B15
 LONG B16
 DOPPIO+ B17;
6. Preparation begins. An image of the selected beverage
appears on the display (B1) together with a progress bar
which gradually lls as preparation progresses.
Please note:
• You can prepare 2 cups of ESPRESSO coee at the same
time by pressing “2X “ (the image is displayed for
a few seconds whenever you start preparing 1 ESPRESSO)
or selecting “2X ESPRESSO” from the beverage selection
menu (B3);
• While the machine is making coee, delivery can be in-
terrupted at any moment by pressing the selection arrow
corresponding to “STOP “.
• As soon as delivery has ended, to increase the quantity of
coee in the cup, just press the selection arrow correspond-
ing to “EXTRA ”. When the required quantity is reached,
press the selection arrow corresponding to“STOP “.
Once the coee has been made, the appliance is ready to make
the next beverage.
Please note!
• Various alarm messages could be displayed while using
the appliance (FILL TANK, EMPTY GROUNDS CONTAINER,
etc.). Their meaning is explained in section “21. Displayed
messages”.
• For hotter coee, see section“9.4 Tips for a hotter coee”.
• If the coee is delivered a drop at a time, too weak and not
creamy enough or too cold, read the tips in section“9.3 Ad-
justing the coee mill”and section “22. Troubleshooting”.
• Preparation of each coee can be customised (see sections
“13. Customising the beverages”and“14. Memorising your
personal prole”).
9.6 Making coee using ground coee
Important!
• Never add ground coee when the machine is o or it
could spread through the inside of the machine and dirty
it.This could damage the appliance.
• Never use more than 1 level measure (C2) or it could dirty
the inside of the coee machine or block the funnel (A4).
Please note!
If you use ground coee, you can only make one cup of coee
at a time.
1. Press the selection arrow (B2) corresponding to “AROMA”
(B5) until “ ”(ground) appears on the display (B1).
2. Open the ground coee funnel lid (A2).
3. Make sure the funnel (A4) is not blocked, then add one
level measure of ground coee (g. 13).
4. Posizionare una tazza sotto i beccucci dell’erogatore caè
(A8) (g. 12).
5. Place a cup under the coee spouts (A8) (g. 12).
- ESPRESSO B14)
 COFFEE B15
 LONG B16

15
9.3 Adjusting the coee mill
The coee mill is set by default to prepare coee correctly and
should not require regulating initially.
However, if after making the rst few coees you nd that the
coee is either too weak and not creamy enough or delivery is
too slow (a drop at a time), this can be corrected by adjusting
the grinding adjustment dial (A5 - g. 10).
Please note!
The grinding adjustment dial must only be turned when the
coee mill is in operation.
If the coee is delivered too slowly or not
at all, turn one click clockwise towards 7.
For fuller bodied creamier coee, turn
one click anticlockwise towards 1 (do
not turn more than one click at a time
otherwise the coee could be delivered
a drop at a time).
These adjustments will only be evident after at least 2 cups of
coee have been delivered.
If this adjustment does not obtain the desired result, turn the
dial another click.
9.4 Tips for a hotter coee
For hotter coee, you should:
• perform a rinse cycle by selecting the“Rinsing”function in
the settings menu (section “8.1 Rinsing ”);
• warm the cups with hot water using the hot water function
(see section“11. Delivering hot water”);
• increase the coee temperature in the settings menu (see
section“8.10 Coee temperature ”).
9.5 Making coee using coee beans
Important!
Do not use caramelised or candied coee beans as they could
stick to the coee mill and make it unusable.
1. Fill the container (A3) (g. 11) with coee beans;
2. Place a cup under the coee spouts (A8);
3. Lower the spouts as near as possible to the cup (g. 12).
This makes a creamier coee;
4. Then select your required coee:
- ESPRESSO B14)
 COFFEE B15
 LONG B16
 DOPPIO+ B17;
6. Preparation begins. An image of the selected beverage
appears on the display (B1) together with a progress bar
which gradually lls as preparation progresses.
Please note:
• You can prepare 2 cups of ESPRESSO coee at the same
time by pressing “2X “ (the image is displayed for
a few seconds whenever you start preparing 1 ESPRESSO)
or selecting “2X ESPRESSO” from the beverage selection
menu (B3);
• While the machine is making coee, delivery can be in-
terrupted at any moment by pressing the selection arrow
corresponding to “STOP “.
• As soon as delivery has ended, to increase the quantity of
coee in the cup, just press the selection arrow correspond-
ing to “EXTRA ”. When the required quantity is reached,
press the selection arrow corresponding to“STOP “.
Once the coee has been made, the appliance is ready to make
the next beverage.
Please note!
• Various alarm messages could be displayed while using
the appliance (FILL TANK, EMPTY GROUNDS CONTAINER,
etc.). Their meaning is explained in section “21. Displayed
messages”.
• For hotter coee, see section“9.4 Tips for a hotter coee”.
• If the coee is delivered a drop at a time, too weak and not
creamy enough or too cold, read the tips in section“9.3 Ad-
justing the coee mill”and section “22. Troubleshooting”.
• Preparation of each coee can be customised (see sections
“13. Customising the beverages”and“14. Memorising your
personal prole”).
9.6 Making coee using ground coee
Important!
• Never add ground coee when the machine is o or it
could spread through the inside of the machine and dirty
it.This could damage the appliance.
• Never use more than 1 level measure (C2) or it could dirty
the inside of the coee machine or block the funnel (A4).
Please note!
If you use ground coee, you can only make one cup of coee
at a time.
1. Press the selection arrow (B2) corresponding to “AROMA”
(B5) until “ ”(ground) appears on the display (B1).
2. Open the ground coee funnel lid (A2).
3. Make sure the funnel (A4) is not blocked, then add one
level measure of ground coee (g. 13).
4. Posizionare una tazza sotto i beccucci dell’erogatore caè
(A8) (g. 12).
5. Place a cup under the coee spouts (A8) (g. 12).
- ESPRESSO B14)
 COFFEE B15
 LONG B16
6. Preparation begins. An image of the selected beverage
appears on the display, together with a progress bar which
gradually lls as preparation progresses.
Important! Making LONG coee:
Halfway through preparation, the message “ADD Ground COF-
FEE” is displayed. Add one level measure of ground coee and
press“OK ” .
Please note!
If “Energy Saving” mode is active, you may have to wait a few
seconds before the rst coee is delivered
10. MAKING CAPPUCCINOS AND MILKBASED
COFFEES
Please note!
• To avoid milk with poor froth or large bubbles, always clean
the milk container lid (D2) and hot water connection noz-
zle (A9) as described in sections “10.4 Cleaning the milk
container after use”, “15.10 Cleaning the milk container”
and “15.11 Cleaning the hot water/steam connection
nozzle”.
10.1 Filling and attaching the milk container
1. Remove the lid (D2) (g. 14);
2. Fill the milk container (D3) with a sucient quantity of
milk, not exceeding the MAX level marked on the contain-
er (g. 15). Each mark on the side of the container corre-
sponds to about 100 ml of milk;
Please note!
• For a denser more even froth, you must use skimmed or
partially skimmed milk at refrigerator temperature (about
5°C).
• If“Energy Saving”mode is enabled, you may have to wait a
few seconds before the beverage is delivered.
3. Make sure the milk intake tube (D4) is correctly inserted in
the bottom of the milk container lid (g. 16);
4. Place the lid back on the milk container;
5. If present, extract the hot water/steam spout (C6) by press-
ing the release button (C7) (g. 17);
6. Attach the milk container (D) to the connection nozzle (A9)
(g. 18) and push as far as it will go. The machine emits a
beep (if the beep function is enabled);
7. Place a suciently large cup under the coee spouts (A8)
and frothed milk spout (D5). Adjust the length of the milk
spout.To move it nearer the cup, simply pull it downwards
(g. 19).
8. Follow the instructions below for each function.

16
10.2 Adjusting the amount of froth
Turn the froth adjustment dial (D1) to adjust the amount of froth
on the milk delivered while making cappuccinos and milk-based
coees.
Dial
position
Description Recommended for…
NO FROTH HOT MILK NOT FROTHED /
CAFFELATTE
MIN. FROTH LATTE MACCHIATO /
FLAT WHITE
MAX. FROTH CAPPUCCINO / CAPPUCCI
NO+ / CAPPUCCINO MIX /
ESPRESSO MACCHIATO / HOT
MILK FROTHED
10.3 Making cappuccino and milk based
coees automatically
1. Fill the milk container (D) and attach it as described above.
2. Select the required beverage:
Directly selected beverages:
• CAPPUCCINO (B10)
• LATTE MACCHIATO B11)
• CAFFELATTE B12)
• HOT MILK (B13)
Selectable from the beverage selection menu (B3):
• CAPPUCCINO+
• ESPRESSO MACCHIATO
• FLAT WHITE
• CAPPUCCINO MIX
3. A message on the display (B1) instructs you to turn the
froth adjustment dial (D1) according to the froth required
by the original recipe. Turn the dial on the milk container
lid (D2) and conrm the selection by pressing the selection
arrow corresponding to“OK ”.
4. After a few seconds, preparation begins automatically and
an image of the selected beverage appears on the display,
together with a progress bar which gradually lls as prepa-
ration progresses.
Please note: general indications when preparing all
milk-based beverages
• To interrupt preparation and go back to the main screen,
press the selection arrow corresponding to“STOP”.
• As soon as delivery has ended (within 3 seconds), to in-
crease the quantity of milk or coee in the cup, just press
one of the beverage selection symbols.
• Preparation of each coee can be customised (see sections
and ).
• Do not leave the milk container out of the refrigerator for
long periods.The warmer the milk (5°C is ideal), the poorer
the quality of froth produced.
Once the coee has been made, the appliance is ready to make
the next beverage.
10.4 Cleaning the milk container after use
Important! Danger of burns
When cleaning the internal tubes of the milk container, a little
hot water and steam leak out of the frothed milk spout (D5).
Avoid contact with splashes of water.
Each time you use a milk function, “TURN DIAL TO CLEAN POSI-
TION” appears on the display and the milk frother lid must be
cleaned:
1. Leave the milk container (D) in the machine (you do not
need to empty it);
2. Place a cup or other recipient under the frothed milk spout
(g. 21);
3. Turn the froth adjustment dial (D1) to “CLEAN” (g. 20).
“CLEANING UNDERWAY RECIPIENT UNDER SPOUT” appears
on the display (B1) together with a bar which gradually
lls as cleaning progresses. Cleaning stops automatically;
4. Turn the dial back to one of the froth selections;
5. Remove the milk container and always clean the steam
connection nozzle (A9) with a sponge (g. 22).
Please note!
• To prepare a number of cappuccinos or milk-based coees,
clean the milk container after you have prepared the last
beverage only. To proceed with making the next beverag-
es, press “ ESC”.
• If you do not clean the milk container, the sym-
bol appears on the display to remind you that it needs
cleaning.
• The milk container can be kept in the refrigerator.
• In some cases, before cleaning you must wait for the appli-
ance to heat up.
11. DELIVERING HOT WATER
Important! Danger of burns.
Do not leave the appliance unattended while hot water is being
delivered.
1. Make sure the hot water/steam spout (C6) is attached cor-
rectly to the hot water/steam connection nozzle (A9);
2. Place a container under the spout (as close as possible to
avoid splashes);
3. Press the selection arrow (B2) corresponding to the“ ”
symbol (B3) to enter the menu;
4. Press the selection arrow (B2) corresponding to the
“NEXT>”symbol to display“HOT WATER”;
5. Press the selection arrow corresponding to “HOT WATER”.
The corresponding image appears on the display (B1),
together with a progress bar which lls gradually as prepa-
ration proceeds;
6. The machine delivers about 250 ml of hot water, then
delivery stops automatically. To interrupt hot water deliv-
ery manually, press the selection arrow corresponding to
“STOP ”.
Please note!
• If “Energy Saving”mode is active, you may have to wait a
few seconds before hot water is delivered.
• Preparation of each coee can be customised (see sections
“13. Customising the beverages”and“14. Memorising your
personal prole”).
12. STEAM DELIVERY
Important! Danger of burns.
Do not leave the appliance unattended while steam is being
delivered.
1. Make sure the hot water/steam spout (C6) is attached cor-
rectly to the hot water/steam connection nozzle (A9);
2. Fill a container with the liquid to be heated or frothed and
immerse the hot water/steam spout in the liquid;
3. Press the selection arrow (B2) corresponding to the“ ”
symbol (B3) to enter the menu;
4. Press the selection arrow (B2) corresponding to the
“NEXT>”symbol to display“STEAM”;
5. Press the selection arrow corresponding to “ STEAM”. The
corresponding image appears on the display (B1), togeth-
er with a progress bar which lls gradually as preparation
proceeds and after a few seconds, steam to heat the liquid
is delivered from the cappuccino maker;

17
• Preparation of each coee can be customised (see sections
and ).
• Do not leave the milk container out of the refrigerator for
long periods.The warmer the milk (5°C is ideal), the poorer
the quality of froth produced.
Once the coee has been made, the appliance is ready to make
the next beverage.
10.4 Cleaning the milk container after use
Important! Danger of burns
When cleaning the internal tubes of the milk container, a little
hot water and steam leak out of the frothed milk spout (D5).
Avoid contact with splashes of water.
Each time you use a milk function, “TURN DIAL TO CLEAN POSI-
TION” appears on the display and the milk frother lid must be
cleaned:
1. Leave the milk container (D) in the machine (you do not
need to empty it);
2. Place a cup or other recipient under the frothed milk spout
(g. 21);
3. Turn the froth adjustment dial (D1) to “CLEAN” (g. 20).
“CLEANING UNDERWAY RECIPIENT UNDER SPOUT” appears
on the display (B1) together with a bar which gradually
lls as cleaning progresses. Cleaning stops automatically;
4. Turn the dial back to one of the froth selections;
5. Remove the milk container and always clean the steam
connection nozzle (A9) with a sponge (g. 22).
Please note!
• To prepare a number of cappuccinos or milk-based coees,
clean the milk container after you have prepared the last
beverage only. To proceed with making the next beverag-
es, press “ ESC”.
• If you do not clean the milk container, the sym-
bol appears on the display to remind you that it needs
cleaning.
• The milk container can be kept in the refrigerator.
• In some cases, before cleaning you must wait for the appli-
ance to heat up.
11. DELIVERING HOT WATER
Important! Danger of burns.
Do not leave the appliance unattended while hot water is being
delivered.
1. Make sure the hot water/steam spout (C6) is attached cor-
rectly to the hot water/steam connection nozzle (A9);
2. Place a container under the spout (as close as possible to
avoid splashes);
3. Press the selection arrow (B2) corresponding to the“ ”
symbol (B3) to enter the menu;
4. Press the selection arrow (B2) corresponding to the
“NEXT>”symbol to display“HOT WATER”;
5. Press the selection arrow corresponding to “HOT WATER”.
The corresponding image appears on the display (B1),
together with a progress bar which lls gradually as prepa-
ration proceeds;
6. The machine delivers about 250 ml of hot water, then
delivery stops automatically. To interrupt hot water deliv-
ery manually, press the selection arrow corresponding to
“STOP ”.
Please note!
• If “Energy Saving”mode is active, you may have to wait a
few seconds before hot water is delivered.
• Preparation of each coee can be customised (see sections
“13. Customising the beverages”and“14. Memorising your
personal prole”).
12. STEAM DELIVERY
Important! Danger of burns.
Do not leave the appliance unattended while steam is being
delivered.
1. Make sure the hot water/steam spout (C6) is attached cor-
rectly to the hot water/steam connection nozzle (A9);
2. Fill a container with the liquid to be heated or frothed and
immerse the hot water/steam spout in the liquid;
3. Press the selection arrow (B2) corresponding to the“ ”
symbol (B3) to enter the menu;
4. Press the selection arrow (B2) corresponding to the
“NEXT>”symbol to display“STEAM”;
5. Press the selection arrow corresponding to “ STEAM”. The
corresponding image appears on the display (B1), togeth-
er with a progress bar which lls gradually as preparation
proceeds and after a few seconds, steam to heat the liquid
is delivered from the cappuccino maker;
6. When the required temperature is obtained, interrupt
steam delivery by pressing the selection arrow correspond-
ing to “STOP ”.(You should not deliver steam for more
than 3 minutes at a time);
Important!
Always stop steam delivery before extracting the container con-
taining the liquid to avoid burns from splashes.
Please note!
If “Energy Saving” mode is active, you may have to wait a few
seconds before the hot water is delivered.
12.1 Tips for using steam to froth milk
• When choosing the size of the container, bear in mind that
the liquid doubles or triples in volume.
• Fora richer denser froth,useskimmedorpartially skimmed
milk at refrigerator temperature (about 5°C).
• For a creamier froth, rotate the container with slow move-
ments in an upward direction.
• To avoid milk with poor froth or large bubbles, always clean
the spout (C6) as described in the following section.
12.2 Clean the hot water/steam spout after use
Always clean the hot water/steam spout (C6) after use to avoid
the build-up of milk residues and prevent it from clogging.
1. Place a container under the hot water/steam spout and de-
liver a little water (see section “11. Delivering hot water”).
To interrupt hot water delivery manually, press the selection
arrow corresponding to “STOP ”.
2. Wait a few minutes for the hot water/steam spout to cool
down, then extract (g. 17) by pressing the release button
(C7). Hold the spout with one hand and with the other,
turn the cappuccino maker and pull it downwards (g. 23).
3. Also remove the steam connection nozzle by pulling it
downwards (g. 24).
4. Check the hole in the connection nozzle is not blocked. If
necessary, clean using a toothpick.
5. Wash all parts of the spout thoroughly with a sponge and
warm water.
6. Insert the nozzle and cappuccino maker on the connection
nozzle by pushing them upwards and turning them clock-
wise until they are attached.
13. CUSTOMISING THE BEVERAGES
The aroma and quantity of the beverages can be customised.
1. Make sure the prole (B4) including the beverage you
want to customise is active;

18
2. From the homepage, press the selection arrow (B2) corre-
sponding to (B6);
3. Select the beverage you want to customise (a directly se-
lected beverage or from the beverage selection menu - B3)
to enter the customising screen;
4. “CHOOSE COFFEE AROMA”: Select the required aroma by
pressing the selection arrows corresponding to “-” or “+”
and press the selection arrow corresponding to “OK ” ;
5. “CUSTOMISING COFFEE QUANTITY, STOP TO SAVE”: Prepa-
ration begins and the appliance displays the quantity
customising screen in the form of a vertical bar. The star
alongside the bar represents the current quantity.
6. When the quantity reaches the minimum quantity you can
set,“STOP ”appears on the display (B1).
7. When the required quantity is reached, press the selection
arrow corresponding to “STOP ”.
8. “SAVE NEW SETTINGS?”: Press the selection arrow corre-
sponding to “OK ” to save (or the selection arrow cor-
responding to ESC to cancel).
The appliance conrms if the values have been saved or not
(depending on the previous selection). Press the selection arrow
corresponding to“OK ”.
The appliance goes back to the homepage.
Please note!
• Cappuccinos and milk-based coees: the coee aroma
is saved rst, followed by the quantity of rst milk, then
coee;
• Hot water: the appliance delivers hot water. Press the
selection arrow corresponding to “STOP ” to save the
required quantity.
• You can also customise the beverages by connecting with
the DeLonghi Coee Link App.
14. MEMORISING YOUR PERSONAL
PROFILE
The appliance allows you to memorise 6 dierent proles, each
associated with a dierent icon.
The prole displays the beverages most frequently selected
from that prole and the aroma and quantity selections for each
beverage are memorised.
To select your personal prole, from the homepage press the
selection arrow corresponding to “ UT 1”(User 1) (B4), then
select another numbered prole.
Please note!
• “ “GST” (GUEST) prole: select this prole to deliver
beverages with the default settings. The function is not
active.
• You can rename your personal prole by connecting with
the DeLonghi Coee Link App (only the rst three charac-
ters will be displayed).
15. CLEANING
15.1 Cleaning the machine
The following parts of the machine must be cleaned regularly:
- the appliance’s internal circuit;
- coee grounds container (A10);
- drip tray (A14);
- water tank (A16);
- coee spouts (A8);
- ground coee funnel (A4);
- infuser (A19), accessible after opening the infuser door
(A18);
- milk container (D);
- the hot water/steam connection nozzle (A9);
- control panel (B).
Important!
• Do not use solvents, abrasive detergents or alcohol to clean
the coee machine.
With De’Longhi superautomatic coee machines, you need
not use chemical products to clean the machine.
• None of the components of the appliance can be washed in
a dishwasher with the exception of the milk container (D).
• Do not use metal objects to remove encrustations or coee
deposits as they could scratch metal or plastic surfaces.
15.2 Cleaning the machine’s internal circuit
If the appliance is not used for more than 3/4 days, before using
it again, we strongly recommend switching it on and:
• performing 2/3 rinse cycles by selecting the “Rinse”func-
tion (section“8.1 Rinsing ”);
• delivering hot water for a few seconds (section “11. Deliv-
ering hot water”).
Please note!
After cleaning, it is normal for the grounds container (A10) to
contain water.
15.3 Cleaning the coee grounds container
When “empty grounds container” appears on the display (B1),
the grounds container must be emptied and cleaned.The appli-
ance cannot be used to make coee until you have cleaned the
grounds container (A10).
Even if not full, the empty grounds container message is dis-
played 72 hours after the rst coee has been prepared. For the
72 hours to be calculated correctly, the machine must never be
turned o with the main switch.
Important! Danger of burns
If you make a number of cappuccinos one after the other, the
metal cup tray (A11) becomes hot.
Wait for it to cool down before touching it and handle it from
the front only.
To clean (with the machine on):
• Remove the drip tray (A14) (g. 25), empty and clean.
• Empty the grounds container (A10) and clean thoroughly
to remove all residues left on the bottom.This can be done
using the spatula on the brush (C5) provided.
Important!
When removing the drip tray, the grounds container must be
emptied, even if it contains few grounds.
If this is not done, when you make the next coees, the grounds
container may ll up more than expected and clog the machine.
15.4 Cleaning the drip tray
Important!
The drip tray (A14) is tted with a level indicator (A12) (red)
showing the level of water it contains (g. 34).
Before the indicator protrudes from the cup tray (A11), the drip
tray must be emptied and cleaned otherwise
the water may overow the edge and damage the appliance,
the surface it rests on or the surrounding area.
To remove the drip tray:
1. Remove the drip tray and the coee grounds container
(A10) (g. 25);
2. Empty the drip tray and grounds container and wash them;
3. Replace the drip tray and grounds container.
15.5 Cleaning the inside of the coee machine
Danger of electric shock!
Before cleaning internal parts, the machine must be turned o
(see section ) and unplugged from the mains power supply.
Never immerse the coee machine in water.
1. Check regularly (about once a month) that the inside of the
appliance (accessible after removing the drip tray (A14) )
is not dirty. If necessary, remove coee deposits with the
brush (C5) supplied and a sponge.
2. Remove all the residues with a vacuum cleaner (g. 27).
15.6 Cleaning the water tank
1. Clean the water tank (A16) regularly (about once a month)
and whenever you replace the water softener lter (C4) (if
provided) with a damp cloth and a little mild washing up
liquid;

19
• You can rename your personal prole by connecting with
the DeLonghi Coee Link App (only the rst three charac-
ters will be displayed).
15. CLEANING
15.1 Cleaning the machine
The following parts of the machine must be cleaned regularly:
- the appliance’s internal circuit;
- coee grounds container (A10);
- drip tray (A14);
- water tank (A16);
- coee spouts (A8);
- ground coee funnel (A4);
- infuser (A19), accessible after opening the infuser door
(A18);
- milk container (D);
- the hot water/steam connection nozzle (A9);
- control panel (B).
Important!
• Do not use solvents, abrasive detergents or alcohol to clean
the coee machine.
With De’Longhi superautomatic coee machines, you need
not use chemical products to clean the machine.
• None of the components of the appliance can be washed in
a dishwasher with the exception of the milk container (D).
• Do not use metal objects to remove encrustations or coee
deposits as they could scratch metal or plastic surfaces.
15.2 Cleaning the machine’s internal circuit
If the appliance is not used for more than 3/4 days, before using
it again, we strongly recommend switching it on and:
• performing 2/3 rinse cycles by selecting the “Rinse”func-
tion (section“8.1 Rinsing ”);
• delivering hot water for a few seconds (section “11. Deliv-
ering hot water”).
Please note!
After cleaning, it is normal for the grounds container (A10) to
contain water.
15.3 Cleaning the coee grounds container
When “empty grounds container” appears on the display (B1),
the grounds container must be emptied and cleaned.The appli-
ance cannot be used to make coee until you have cleaned the
grounds container (A10).
Even if not full, the empty grounds container message is dis-
played 72 hours after the rst coee has been prepared. For the
72 hours to be calculated correctly, the machine must never be
turned o with the main switch.
Important! Danger of burns
If you make a number of cappuccinos one after the other, the
metal cup tray (A11) becomes hot.
Wait for it to cool down before touching it and handle it from
the front only.
To clean (with the machine on):
• Remove the drip tray (A14) (g. 25), empty and clean.
• Empty the grounds container (A10) and clean thoroughly
to remove all residues left on the bottom.This can be done
using the spatula on the brush (C5) provided.
Important!
When removing the drip tray, the grounds container must be
emptied, even if it contains few grounds.
If this is not done, when you make the next coees, the grounds
container may ll up more than expected and clog the machine.
15.4 Cleaning the drip tray
Important!
The drip tray (A14) is tted with a level indicator (A12) (red)
showing the level of water it contains (g. 34).
Before the indicator protrudes from the cup tray (A11), the drip
tray must be emptied and cleaned otherwise
the water may overow the edge and damage the appliance,
the surface it rests on or the surrounding area.
To remove the drip tray:
1. Remove the drip tray and the coee grounds container
(A10) (g. 25);
2. Empty the drip tray and grounds container and wash them;
3. Replace the drip tray and grounds container.
15.5 Cleaning the inside of the coee machine
Danger of electric shock!
Before cleaning internal parts, the machine must be turned o
(see section ) and unplugged from the mains power supply.
Never immerse the coee machine in water.
1. Check regularly (about once a month) that the inside of the
appliance (accessible after removing the drip tray (A14) )
is not dirty. If necessary, remove coee deposits with the
brush (C5) supplied and a sponge.
2. Remove all the residues with a vacuum cleaner (g. 27).
15.6 Cleaning the water tank
1. Clean the water tank (A16) regularly (about once a month)
and whenever you replace the water softener lter (C4) (if
provided) with a damp cloth and a little mild washing up
liquid;
2. Remove the lter (if present) and rinse with running water;
3. Replace the lter (if provided), ll the tank with fresh
water and replace the tank;
4. (Models with water softener lter only) Deliver about
100ml of hot water to reactivate the lter.
15.7 Cleaning the coee spouts
1. Clean the coee spouts (A8) regularly with a sponge or
cloth (g. 28A);
2. Check that the holes in the coee spouts are not blocked.
If necessary, remove coee deposits with a toothpick (g.
28B).
15.8 Cleaning the ground coee funnel
Check regularly (about once a month) that the ground coee
funnel (A4) is not blocked.
If necessary, remove coee deposits with the brush (C5)
supplied.
15.9 Cleaning the infuser
The infuser (A19) must be cleaned at least once a month.
Important!
The infuser may not be extracted when the machine is on.
1. Make sure the machine is correctly turned o (see“7. Turn-
ing the appliance o”);
2. Remove the water tank (A16) (g. 3);
3. Open the infuser door (A18) (g. 29) on the right side of
the appliance;
4. Press the two coloured release buttons inwards and at the
same time pull the infuser outwards (g. 30);
5. Soak the infuser in water for about 5 minutes, then rinse
under the tap;
Important!
RINSE WITH WATER ONLY
NO WASHING UP LIQUID  NO DISH WASHER
Clean the infuser without using washing up liquid as it
could be damaged.
6. Use the brush (C5) to remove any coee residues left in the
infuser housing, visible through the infuser door;
7. After cleaning, replace the infuser by sliding it onto the
internal support (g. 31), then push the PUSH symbol fully
in until it clicks into place;
Please note!
If the infuser is dicult to insert, before insertion, adapt it to the
right size by pressing the two levers shown in g. 32.