DeLonghi PRIMADONNA ELITE User manual

ECAM65055
COFFEE MAKER
Instructions for use. Keep these instructions
Visit www.delonghi.com for a list of service centers
near you.
ELECTRIC CHARACTERISTICS
120 V~ 60 Hz1250 W
MACHINE À CAFÉ
Mode d’emploi . Conservez cette notice
Visitez www.delonghi.com pour y voir une liste des centres
de réparation proches de chez vous.
CARACTÉRISTIQUES ÉLECTRIQUES
120 V~ 60 HZ 1250 W
CAFETERA
Repase y guarde estas instrucciones.
Lea cuidadosamente este instructivo antes de usar su
aparato.
Visite www.delonghi.com para ver la lista de centros de
servicios cercanos a usted.
CARACTERISTICAS ELECTRICAS:
120 V~ 60 HZ 1250 W
Instructions videos available at:
http://ecam65055.delonghi.com

2
A
A5
A2
A1
A4
A7
A3
B
A6
A9
A8
A19
A10
A11
A13
A12
A15
A16
A17
A21
A18
A14
A20

3
D1
B1 B4
D2
D4
B
D
D5
D3
C2
C1
C3
C6
C7
C4
C
C5
10:00
SELECT BEVERAGE
QUANTITY STRENGTH
B2 B3
B5
B2
B8 B6B7B9
B10
B11
B12
B13
B14
B15
B16
B17
PROFILE 1

4
CONTENTS
1. SAFETY WARNINGS ....................................6
1.1 Designated use..............................................6
1.2 Instruction for Use.........................................6
2. INTRODUCTION..........................................6
2.1 Letters in brackets.........................................6
2.2 Troubleshooting and repairs..........................6
2.3 Download the App!.......................................6
3. DESCRIPTION.............................................6
3.1 Description of the appliance (page 2 - A) ......6
3.2 Description of the homepage (main screen)
(page 3 - B ) ..................................................7
3.3 Description of the accessories........................7
3.4 Description of the milk container ..................7
4. BEFORE USE...............................................7
4.1 Checking the appliance.................................7
4.2 Installing the appliance.................................7
4.3 Connecting the appliance..............................7
5. TURNING THE APPLIANCE ON......................8
6. TURNING THE APPLIANCE OFF ....................9
7. MENU SETTINGS................................9
7.1 Rinsing ........................................................9
7.2 Descaling ......................................................9
7.3 Water lter ...................................................9
7.4 Beverages settings .......................................9
7.5 Adjust time .................................................10
7.6 Auto-start ..................................................10
7.7 Auto-o (standby) .....................................10
7.8 Cup warmer ................................................10
7.9 Energy saving ............................................10
7.10 Coee temperature ....................................11
7.11 Water hardness ..........................................11
7.12 Selecting the language ..............................11
7.13 Beep ...........................................................11
7.14 Cup light .....................................................11
7.15 Bluetooth ...................................................11
7.16 Default values ............................................12
7.17 Statistics .....................................................12
8. MAKING COFFEE.............................. 12
8.1 Making coee using coee beans ...............12
8.2 Selecting the coee strength ......................12
8.3 Selecting the coee quantity ......................13
8.4 Making coee using pre-ground coee.......13
8.5 Adjusting the coee grinder........................13
8.6 Tips for a hotter coee.................................14
9. MAKING CAPPUCCINOS AND MILKBASED
COFFEES.................................................. 14
9.1 Filling and attaching the milk container......14
9.2 Adjusting the amount of froth.....................15
9.3 Making cappuccino and milk-based coees
automatically..............................................15
9.4 Cleaning the milk container after use .........15
10. DELIVERING HOT WATER.................. 16
11. STEAM DELIVERY............................. 16
11.1 Tips for using steam to froth milk................16
11.2 Cleaning the hot water/steam spout after use
..................................................................16
12. CUSTOMIZING THE BEVERAGES ....... 17
13. MEMORIZING YOUR PERSONAL PROFILE
17
14. CLEANING............................................... 18
14.1 Cleaning the machine .................................18
14.2 Cleaning the machine's internal circuit .......18
14.3 Cleaning the coee grounds container........18
14.4 Cleaning the drip tray..................................19
14.5 Cleaning the inside of the coee machine..19
14.6 Cleaning the water tank..............................19
14.7 Cleaning the brewing unit...........................19
14.8 Cleaning the pre-ground coee funnel .......19
14.9 Cleaning the infuser....................................20
14.10Cleaning the milk container........................20
14.11Cleaning the hot water/steam connection
nozzle..........................................................21
15. DESCALING..................................... 21
16. SETTING WATER HARDNESS ............. 22
16.1 Measuring water hardness..........................22
16.2 Setting water hardness ..............................23
17. WATER SOFTENER FILTER................. 23
17.1 Installing the lter ......................................23
17.2 Replacing the lter......................................23
17.3 Removing the lter.....................................24
18. REGULATORY COMPLIANCE....................... 24
19. DISPLAYED MESSAGES..................... 25
20. TROUBLESHOOTING......................... 30

5
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed, including the following.
• Read all instructions carefully.
• Make sure the voltage of your electrical system corresponds to the voltage shown on the bottom of the
machine.
• Do not touch hot surfaces. Use handles or knobs.
• To protect against re, electrical shock and personal injury, do not immerse cord, plug or appliance in
water or other liquid.
• Keeptheapplianceout of thereachof childrenand do notleaveappliance unattendedwhilein operation.
• Unplug from the outlet when not in use and before cleaning.
• Do not operate with a damaged cord or plug, or after the appliance malfunctions, or has been damaged
in any manner. Return the appliance to the nearest authorized service facility for examination, repair or
adjustment.
• The use of accessory attachments not recommended by the manufacturer may result in re, electrical
shock, or personal injury.
• Do not use outdoors.
• Make sure the power cord does not hang over the edge of the table or counter-top to avoid getting acci-
dentally caught or entangled.
• Do not place the appliance or its electrical parts on or near electric stoves, cooking surfaces, or gas burners.
• Plug cord into the wall outlet.To disconnect, rst turn machine“o”, then remove plug from wall outlet.
• Do not use the appliance for other than the intended use. This appliance is to be utilized for domestic
use only. The manufacturer declines all responsibility for any damage caused by improper, incorrect, or
irresponsible use.
WARNING: To reduce the risk of re or electric shock, do not remove the cover or the exterior of
the unit. Don’t attempt to repair or modify the machine, doing so will void the warranty. Repair
should be done by authorized service personnel only!
SAVE THESE INSTRUCTIONS
THIS APPLIANCE IS FOR HOUSEHOLD USE ONLY
SHORT CORD INSTRUCTIONS
- A short power cord is provided to reduce risks resulting from becoming entangled in or tripping over a
longer cord.
- Longer, detachable power supply cords or extension cords are available and may be used if care is exer-
cised in their use.
- If an extension cord is used, the marked electrical rating should be at least as great as the electrical rating
of the appliance. If the appliance is provided with 3- wire, grounding type cord, the extension should be
a GROUNDING TYPE 3 - WIRE CORD. The longer cord should be arranged so that it will not drape over the
counter-top or table top where it can be pulled on by children or tripped over.
- Your product is equipped with a polarized alternating current line plug (a plug having one blade wider
than the other). This plug will t into the power outlet only one way. This is a safety feature. If you are
unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to t,
contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized
plug.

6
1. SAFETY WARNINGS
Danger!
This is an electrical appliance and may cause electric shock.
You should therefore follow these safety warnings:
• Never touch the appliance with damp hands or feet.
• Never touch the plug with damp hands.
• Make sure the socket used is freely accessible at all times,
enabling the appliance to be unplugged when necessary.
• Unplug directly from the plug only. Never pull the cord as
you could damage it.
• To disconnect the appliance completely you must unplug it
from the mains socket.
• If the appliance is faulty, do not attempt to repair.
Turn it o, unplug from the mains socket and contact Cus-
tomer Services.
• Before cleaning the appliance, turn it o, unplug from the
mains socket and allow to cool.
Important:
Keep all packaging (plastic bags, polystyrene foam) away from
children.
Danger of burns!
This appliance produces hot water and steam may form while
it is in operation.
Avoid contact with splashes of water or hot steam.
When the appliance is in operation, the cup shelf could become
very hot.
1.1 Designated use
This appliance is designed and made to prepare coee and milk
and heat beverages.
Any other use is considered improper and thus dangerous. The
manufacturer is not liable for damage deriving from improper
use of the appliance.
1.2 Instruction for Use
Read this Instruction for Use carefully before using the appli-
ance. Failure to follow this Instruction for Use may result in inju-
ry or damage to the appliance.
The manufacturer is not liable for damage deriving from failure
to respect this Instruction for Use.
Please note:
Keep this Instruction for Use. If the appliance is passed to other
persons, they must also be provided with this Instruction for
Use.
2. INTRODUCTION
Thank you for choosing this bean to cup espresso and cappuc-
cino machine.
Take a few minutes to read this Instruction for Use. This will
avoid all risks and damage to the appliance.
2.1 Letters in brackets
The letters in brackets refer to the legend in the description of
the appliance on pages 2-3.
2.2 Troubleshooting and repairs
In the event of problems, rst try and resolve them by reading
the information given in sections “19. DISPLAYED MESSAGES”
and“20. Troubleshooting”.
If this does not resolve the problem or you require further in-
formation, you should consult Customer Services by calling the
number given on the annexed "Customer Service" sheet.
If your country is not among those listed on the sheet, call the
number given in the warranty If repairs are required, contact
De’Longhi Customer Services only. The addresses are given in
the warranty certicate provided with the machine.
2.3 Download the App!
A number of functions can be controlled remotely using the
De’Longhi Coee Link App.
In the App, you can also nd information, tips and curious facts
about the world of coee, together with information on your
machine at your ngertips.
This symbol highlights the functions you can control or
consult using the App.
You can also create up to 6 new beverages and save them in your
appliance.
Please note:
Check compatible devices on "compatibledevices.delonghi.
com".
3. DESCRIPTION
3.1 Description of the appliance (page 2 - A)
A1. Beans container lid
A2. Pre-ground coee funnel lid
A3. Beans container
A4. Pre-ground coee funnel
A5. Grinding adjustment dial
A6. Cup warmer shelf
A7. button: to turn the appliance on and o (standby)

7
3.4 Description of the milk container
(page 3 - D )
D1. Froth adjustment and CLEAN dial
D2. Milk container lid
D3. Milk container
D4. Milk intake tube
D5. Frothed milk spout (adjustable)
4. BEFORE USE
4.1 Checking the appliance
After removing the packaging, make sure the product is com-
plete and undamaged and that all accessories are present. Do
not use the appliance if it is visibly damaged. Contact De’Longhi
Customer Services.
4.2 Installing the appliance
Important!
When you install the appliance, you should respect the follow-
ing safety warnings:
• The appliance gives o heat. After positioning the appli-
ance on the worktop, leave a space of at least 1.5 in /3 cm
between the surfaces of the appliance and the side and
rear walls and at least 6 in /15 cm above the coee maker.
• Water penetrating the coee machine could cause
damage.
Do not place the appliance near taps or sinks.
• The appliance could be damaged if the water it contains
freezes.
Do not install the appliance in a room where the tempera-
ture could drop below freezing point.
• Arrange the power cord in such a way that it cannot be
damaged by sharp edges or contact with hot surfaces (e.g.
electric hot plates).
4.3 Connecting the appliance
Important!
Check that the mains power supply voltage corresponds to that
indicated on the rating plate on the bottom of the appliance.
If the power socket does not match the plug on the appliance,
have the socket replaced with a suitable type by a qualied
electrician.
4.4 Setting up the appliance
Please note!
• Coee has been used to factory test the appliance and it is
therefore completely normal for there to be traces of coee
in the grinder. The machine is, however, guaranteed to be
new.
A8. Brewing unit (adjustable height)
A9. Hot water and steam connection nozzle
A10. Coee grounds container
A11. Cup tray
A12. Drip tray water level indicator
A13. Drip tray grille
A14. Drip tray
A15. Water tank lid
A16. Water tank
A17. Water softener lter housing
A18. Infuser door
A19. Infuser
A20. Power cord
A21. Main switch (ON/OFF)
3.2 Description of the homepage (main screen)
(page 3 - B )
B1. Display
B2. Selection arrows
B3. Beverage selection menu (other than directly selected
beverages):CAPPUCCINO+,FLATWHITE, CAPPUCCINOMIX,
ESPRESSO MACCHIATO, HOTWATER, 2X ESPRESSO, STEAM;
B4. Customizable proles (see”13. Memorizing your personal
prole”)
B5. Selected strength
B6. : menu to customize the beverages settings
B7. Standard or Custom strength/quantity
B8. : appliance settings menu
B9. Selected quantity
Directly selected beverages:
B10. CAPPUCCINO
B11. LATTE MACCHIATO
B12. LATTE
B13. HOT MILK
B14. ESPRESSO
B15. COFFEE
B16. LONG
B17. DOPPIO+
3.3 Description of the accessories
(page 3 - C)
C1. "Total Hardness Test" indicator paper (attached to page 2
of the English instructions)
C2. Pre-ground coee measuring spoon
C3. Descaler
C4. Water softener lter (certain models only)
C5. Cleaning brush
C6. Hot water/steam spout
C7. Spout release button

8
• You should customize water hardness as soon as possible
following the instructions in section “16. Setting water
hardness”.
1. Connect the appliance to the mains electricity supply (g.
1). Make sure the main switch (A21) at the back of the ap-
pliance is pressed (g. 2);
2. "SELECT LANGUAGE": Press the selection arrow (B2) corre-
sponding to the required language;
21
Follow the instructions indicated on the appliance display:
433
3. "FILL TANK WITH FRESH WATER": remove the water tank
(A16) (g. 3), open the lid (A15) (g. 4), ll to the MAX line
with fresh water (g. 5), close the lid and put the tank back
in the appliance (g. 6);
6
5
4. "INSERT WATER SPOUT": Check that the hot water/steam
spout (C6) is inserted on the connection nozzle (A9) (g. 7)
and place a container holding a minimum of 3.38 oz /100
ml underneath (g. 8);
5. "WATER CIRCUIT EMPTY PRESS OK TO START" appears on
the display;
87
6. Press the " OK" button to conrm.The appliance deliv-
ers hot water from the hot water spout (g. 8) then goes
o automatically.
The coee machine is now ready for normal use.
Please note!
• The rst time you use the coee maker, you need to make
4-5 cups of coee or 4-5 cappuccinos before it starts to give
satisfactory results.
• The rst time you use the machine, the water circuit is
empty and the appliance could be very noisy. The noise
becomes less as the circuit lls.
• When making the rst 5-6 cappuccinos, it is normal to
hear the noise of boiling water. After this, the noise be-
comes less.
• To improve the performance of your appliance, we recom-
mend installing a water softener lter (C4) as described
in section “17. Water softener lter”. If your model is not
provided with a lter, you can purchase one on delonghi.
com.
5. TURNING THE APPLIANCE ON
Please note!
Before turning the appliance on, make sure the main switch
(A21) is pressed (g. 2).
Each time the appliance is turned on, it performs an automatic
preheat and rinse cycle which cannot be interrupted.The appli-
ance is ready for use only after completion of this cycle.
Danger of burns!
During rinsing, a little hot water comes out of the brewing unit
(A8) and is collected in the drip tray (A14) underneath. Avoid
contact with splashes of water.

9
• To turn the appliance on, press the button (A7-g.
9). The message "HEATING UP UNDERWAY PLEASE WAIT"
appears on the display.
9
• When heating is complete, the message changes to:
"RINSING UNDERWAY, HOT WATER FROM SPOUTS". As
well as heating the boiler, this also heats the internal cir-
cuits by circulating hot water.
The appliance is at temperature when the main screen (home-
page) appears.
6. TURNING THE APPLIANCE OFF
Whenever the coee machine is turned o after being used to
make coee, it performs an automatic rinse cycle.
Danger of burns!
During rinsing, a little hot water ows from the brewing unit
(A8). Avoid contact with splashes of water.
• To turn the appliance o, press the button (A7) (g.
9).
• The message "TURNING OFF UNDERWAY, PLEASE WAIT"
is displayed, then the appliance performs a rinse cycle and
goes o (standby).
Please note!
If you will not be using the appliance for some time, unplug
from the mains socket:
• rst turn the appliance o by pressing the button
(g. 9);
• release the main switch (A21) at the back of the appliance
(g. 2).
Important!
Never press the main switch while the appliance is on.
7. MENU SETTINGS
7.1 Rinsing
Use this function to deliver hot water from the brewing unit (A8)
and hot water/steam spout (C6), if inserted, to clean and heat
the appliance’s internal circuit.
Place a container with a minimum capacity of 3.38 oz /100ml
under the coee and hot water spouts (g. 8).
To enable the function, proceed as follows:
1. Press the selection arrow (B2) corresponding to the " "
symbol (B8) to enter the menu;
2. Press the selection arrow corresponding to " RINSING";
Important! Danger of burns.
Do not leave the appliance unattended while hot water is being
delivered.
3. After a few seconds, hot water is delivered rst from the
brewing unit, then from the hot water/steam spout (if in-
serted) to clean and heat the appliance’s internal circuit.
"RINSING UNDERWAY, HOTWATER FROM SPOUTS"appears
on the display, together with a progress bar which lls
gradually as preparation proceeds;
4. To interrupt rinsing, press the selection arrow correspond-
ing to " STOP" or wait for rinsing to stop automatically.
Please note!
• If the appliance is not used for more than 3-4 days, when
switched on again, we strongly recommend performing
2/3 rinses before use;
• After cleaning, it is normal for the coee grounds container
(A10) to contain water.
7.2 Descaling
For instructions on descaling, see section“15. Descaling”.
7.3 Water lter
For instructions on how to install the lter (C4), see section”17.
Water softener lter”.
7.4 Beverages settings
In this section, you can consult your customised settings and, if
you wish, reset the default values for each beverage.
1. Press the selection arrow (B2) corresponding to the " "
symbol (B8) to enter the menu;
2. Scroll through the menu items by pressing the selection
arrow corresponding to "NEXT>" until " BEVERAGES
SETTINGS" appears on the display;
3. The values for the rst beverage appear on the display;
4. The reference user prole is highlighted on the display. The
values are displayed on vertical bars. The default value is
indicated by the symbol, while the current value is
highlighted by the solid part of the vertical bar;
5. To go back to the settings menu, press the selection arrow
corresponding to " ESC". To scroll through and display
the beverages, press the selection arrow corresponding to
"NEXT>";
6. To reset the default values for the beverage displayed,
press the selection arrow corresponding to " RESET";

10
7. "CONFIRM RESET?": to conrm press the selection arrow
corresponding to " OK " (to cancel, press the selection
arrow corresponding to " ESC");
8. "DEFAULT VALUES SET": press " OK ".
The beverage has been reset to the default values. Proceed with
the other beverages or go back to the homepage by pressing the
arrow corresponding to " ESC" twice.
Please note!
• To change the beverages in another prole, go back to the
homepage, select the required prole (B11) and repeat the
procedure.
• To reset all the beverages in the prole to the default val-
ues, see section“7.16 Default values ”.
7.5 Adjust time
To adjust the time on the display (B1), proceed as follows:
1. Press the selection arrow (B2) corresponding to the " "
symbol (B8) to enter the menu;
2. Scroll through the menu items by pressing the selection
arrow corresponding to "NEXT>" until " SET TIME"
appears on the display;
3. Press the selection arrow corresponding to " SET
TIME":The time setting panel appears on the display;
4. Adjust the time by pressing the selection arrows corre-
sponding to (increase) or (decrease) for the
hours (H) and minutes (MIN);
5. To conrm, press the selection arrow corresponding to " OK"
(to cancel, press the selection arrow corresponding to "
ESC") and press the selection arrow corresponding to "
ESC" to go back to the homepage.
The time is now set.
7.6 Auto-start
You can set the auto-start time in order to have the appliance
ready at a certain time (for example in the morning) so you can
make coee immediately.
Please note!
To enable this function, the time must already be set correctly
(see section“7.5 Adjust time ”).
To enable auto-start, proceed as follows:
1. Press the selection arrow (B2) corresponding to the " "
symbol (B8) to enter the menu;
2. Scroll through the menu items by pressing the selection
arrow corresponding to "NEXT>" until " AUTOSTART"
appears on the display;
3. Press the selection arrow corresponding to " AU
TOSTART". Disable (or enable) the function by pressing
the selection arrow corresponding to (or );
4. Press the selection arrow corresponding to " SETTIME".
The time setting panel appears on the display (B1);
5. Adjust the time by pressing the selection arrows corre-
sponding to (increase) or (decrease) for the
hours (H) and minutes (MIN);
6. To conrm, press the selection arrow corresponding to "
OK";
7. Press the selection arrow corresponding to " ESC" twice
to go back to the homepage.
The auto-start time is now set and the corresponding symbol is
displayed to indicate that the function has been enabled.
Please note!
When the appliance is turned o using the main switch (A21),
the auto-start setting (if enabled) is lost.
7.7 Auto-o (standby)
Auto-o can be set so that the appliance goes o after 15 or 30
minutes, or 1, 2 or 3 hours.
To programme Auto-o, proceed as follows:
1. Press the selection arrow (B2) corresponding to the " "
symbol (B8) to enter the menu;
2. Scroll through the menu items by pressing the selection
arrow corresponding to "NEXT>" until " AUTO-OFF"
appears on the display;
3. Press the selection arrow corresponding to "
AUTO-OFF";
4. Select the required time interval by pressing the selec-
tion arrows corresponding to (increase) or
(decrease);
5. To conrm, press the selection arrow corresponding to "
OK";
6. Press the selection arrow corresponding to " ESC" to go
back to the homepage.
Auto-o is now programmed.
7.8 Cup warmer
To warm the cups before making coee, you can enable the cup
warmer (A6) and rest the cups on the shelf.
1. Press the selection arrow (B2) corresponding to the " "
symbol (B8) to enter the menu;
2. Scroll through the menu items by pressing the selection
arrow corresponding to "NEXT>" until " CUP WARMER"
appears on the display;
3. Press the selection arrow corresponding to "CUPWARMER"
to disable ( ) or enable ( ) the function.
4. Press the selection arrow corresponding to " ESC" to go
back to the homepage.
7.9 Energy saving
Use this function to enable or disable energy saving. When en-
abled, the function reduces energy consumption in compliance
with European regulations.

11
To disable or enable "Energy Saving", proceed as follows:
1. Press the selection arrow (B2) corresponding to the " "
symbol (B8) to enter the menu;
2. Scroll through the menu items by pressing the selection
arrow corresponding to "NEXT>" until " ENERGY SAVING"
appears on the display;
3. Press the selection arrow corresponding to "ENERGY SAV-
ING" to disable ( ) or enable ( ) the function.
4. Press the selection arrow corresponding to " ESC" to go
back to the homepage.
The corresponding symbol appears on the display alongside the
time to indicate that the function has been enabled.
7.10 Coee temperature
To modify the temperature of the water used to make the coee,
proceed as follows:
1. Press the selection arrow (B2) corresponding to the " "
symbol (B8) to enter the menu;
2. Scroll through the menu items by pressing the selection
arrow corresponding to " NEXT>" until " COFFEE TEM-
PERATURE" appears on the display;
3. Pressthe selection arrowcorrespondingto "COFFEETEM-
PERATURE". The selectable values appear on the display (B1)
(the current value is underlined);
4. Press the selection arrow corresponding to the value you
want to set (LOW, MEDIUM, HIGH, MAXIMUM);
5. Press the selection arrow corresponding to " ESC" twice
to go back to the homepage.
7.11 Water hardness
For instructions on setting water hardness, see section“16. Set-
ting water hardness”.
7.12 Selecting the language
To modify the language of the display (B1), proceed as follows:
1. Press the selection arrow (B2) corresponding to the " "
symbol (B8) to enter the menu;
2. Scroll through the menu items by pressing the selection
arrow corresponding to " NEXT>" until " SET LAN-
GUAGE" appears on the display;
3. Press the selection arrow corresponding to "SET
LANGUAGE";
4. Press the selection arrow corresponding to the language
required (press the selection arrow corresponding to
"NEXT>" to display all the languages available);
5. Press the selection arrow corresponding to " ESC" twice
to go back to the homepage.
7.13 Beep
This enables or disables the beep emitted by the machine each
time an icon is pressed or an accessory is inserted/removed. To
disable or enable the beep, proceed as follows:
1. Press the selection arrow (B2) corresponding to the " "
symbol (B8) to enter the menu;
2. Scroll through the menu items by pressing the selection
arrow corresponding to "NEXT>" until " BEEP" appears on
the display;
3. Press the selection arrow corresponding to "BEEP" to dis-
able ( ) or enable ( ) the function;
4. Press the selection arrow corresponding to " ESC" to go
back to the homepage.
7.14 Cup light
This function enables or disables the cup lighting.
The lights come on each time a coee or milk-based beverage is
made and during each rinsing cycle.
To disable or enable this function, proceed as follows:
1. Press the selection arrow (B2) corresponding to the " "
symbol (B8) to enter the menu;
2. Scroll through the menu items by pressing the selection
arrow corresponding to "NEXT>" until "CUP LIGHTING"
appears on the display;
3. Press the selection arrow corresponding to "cup lighting"
to DISABLE ( ) or enable ( ) the function;
4. Press the selection arrow corresponding to " ESC" to go
back to the homepage.
7.15 Bluetooth
This function enables or disables the protection PIN to connect
to the appliance from a device.
1. Press the selection arrow (B2) corresponding to the " "
symbol (B8) to enter the menu;
2. Scroll through the menu items by pressing the selection
arrow corresponding to "NEXT>" until " BLUETOOTH"
appears on the display;
3. Press the selection arrow corresponding to " BLUETOOTH".
The serial number of the machine (19 digits) and a 4 digit
number (PIN) appear on the display (B1);
4. Press the selection arrow to disable ( ) or enable (
) the request for the PIN when you connect via the APP;
5. Press the selection arrow corresponding to " ESC" twice
to go back to the homepage.
During connection operations, the PIN required to connect to
the App appears on the display.
You are recommended to customize the PIN directly from the
APP.
Please note!
The serial number of the appliance, visible in the "Bluetooth"
function, enables it to be identied unambiguously when an
association is created with the APP.

12
7.16 Default values
This resets all menu settings and programmed quantities back
to the default values (with the exception of the language which
remains as set).
To reset the default values, proceed as follows:
1. Press the selection arrow (B2) corresponding to the " "
symbol (B8) to enter the menu;
2. Scroll through the menu items by pressing the selection
arrow corresponding to "NEXT>" until " DEFAULTVAL-
UES" appears on the display;
3. "RESET DEFAULT VALUES?": to conrm press the selection
arrow corresponding to " OK" (to cancel, press the selec-
tion arrow corresponding to " ESC");
4. "DEFAULT VALUES SET": press the selection arrow corre-
sponding to " OK" to conrm;
5. Press the selection arrow corresponding to " ESC" to go
back to the homepage.
7.17 Statistics
This displays statistics relating to the machine. To display the
statistics, proceed as follows:
1. Press the selection arrow (B2) corresponding to the " "
symbol (B8) to enter the menu;
2. Scroll through the menu items by pressing the selection
arrow corresponding to "NEXT>" until " STATISTICS"
appears on the display;
3. Press the selection arrow corresponding to " STATISTICS"
and check all the statistics by scrolling through the items
using the selection arrow corresponding to "NEXT>";
4. Press " ESC" twice to go back to the homepage.
8. MAKING COFFEE
8.1 Making coee using coee beans
Important!
Do not use caramelized or candied coee beans as they could
stick to the coee grinder and make it unusable.
1. Fill the container (A3) (g. 10) with coee beans;
1110
2. Place a cup under the brewing unit (A8);
3. Lower the spouts as near as possible to the cup (g. 11).
This makes a creamier coee;
4. Then select your required coee:
- ESPRESSO (B14)
 COFFEE B15
 LONG B16
 DOPPIO+ B17;
6. Preparation begins. An image of the selected beverage
appears on the display (B1) together with a progress bar
which gradually lls as preparation progresses.
Please note:
• You can prepare 2 cups of ESPRESSO coee at the same
time by pressing “ 2X” (the image is displayed for
a few seconds whenever you start preparing 1 ESPRESSO)
or selecting “2X ESPRESSO” from the beverage selection
menu (B3);
• While the machine is making coee, delivery can be inter-
rupted at any moment by pressing the selection arrow (B2)
corresponding to“ STOP”.
• As soon as delivery has ended, to increase the quantity of
coee in the cup, just press the selection arrow (B2) cor-
responding to “ EXTRA”. When the required quantity is
reached, press the selection arrow corresponding to “
STOP”.
Once the coee has been made, the appliance is ready to make
the next beverage.
Please note!
• Various alarm messages could be displayed while using
the appliance (FILL TANK, EMPTY GROUNDS CONTAIN
ER, ETC.). Their meaning is explained in section “19. DIS-
PLAYED MESSAGES” .
• For hotter coee, see section“8.6 Tips for a hotter coee”.
• If the coee is delivered a drop at a time, too weak and
not creamy enough or too cold, read the tips in sec-
tion “8.5 Adjusting the coee grinder” and section “20.
Troubleshooting”.
• Preparation of each coee can be customized (see sections
“12. Customizing the beverages”and”13. Memorizing your
personal prole”).
8.2 Selecting the coee strength
From the homepage, select the required coee strength by
pressing the selection arrow (B2) corresponding to "STRENGTH"
(B5):
(see “8.4 Making coee
using pre-ground coee”)
EXTRA LIGHT

13
LIGHT
MEDIUM
STRONG
X-STRONG
Custom (if programmed) /
Standard
8.3 Selecting the coee quantity
From the homepage, select the required quantity of coee in
the cup by pressing the selection arrow (B2) corresponding to
"QUANTITY" (B9):
SMALL SIZE
MEDIUM SIZE
LARGE SIZE
EXTRA-LARGE SIZE
Custom quantity (if pro-
grammed) / Standard
quantity
8.4 Making coee using pre-ground coee
Important!
• Never add pre-ground coee when the machine is o or it
could spread through the inside of the machine and dirty
it.This could damage the appliance.
• Never use more than 1 level measuring scoop (C2) or it
could dirty the inside of the coee machine or block the
funnel (A4).
Please note!
If you use pre-ground coee, you can only make one cup of cof-
fee at a time.
1. Press the selection arrow (B2) corresponding to
"STRENGTH" (B5) until " " (pre-ground) appears on
the display (B1).
2. Open the pre-ground coee funnel lid (A2).
3. Make sure the funnel (A4) is not blocked, then add one
level measuring scoop of pre-ground coee (g. 12).
12
4. Place a cup under the brewing unit (A8) (g. 12).
5. Then select your required coee:
- ESPRESSO (B14)
 COFFEE B15
 LONG B16
6. Preparation begins. An image of the selected beverage
appears on the display, together with a progress bar which
gradually lls as preparation proceeds.
Please note:
• While the machine is making coee, delivery can be inter-
rupted at any moment by pressing the selection arrow (B2)
corresponding to " STOP".
• As soon as delivery has ended, to increase the quantity of
coee in the cup, just press the selection arrow (B2) cor-
responding to " EXTRA". When the required quantity is
reached, press the selection arrow corresponding to "
STOP".
Once the coee has been made, the appliance is ready to make
the next beverage.
Important! Making LONG coee:
Halfway through preparation, the message "ADD PREGROUND
COFFEE" is displayed. Add one level measuring spoon of pre-
ground coee and press the selection arrow corresponding to
"OK".
Please note!
• Various alarm messages could be displayed while using
the appliance (FILL TANK, EMPTY GROUNDS CONTAINER,
ETC.). Their meaning is explained in section“19.
• DISPLAYED MESSAGES”.
• For hotter coee, see section“8.6 Tips for a hotter coee”.
• If "Energy Saving" mode is active, you may have to wait a
few seconds before the rst coee is delivered.
8.5 Adjusting the coee grinder
The coee grinder is set by default to prepare coee correctly
and should not require regulating initially.
However, if after making the rst few coees you nd that the
coee is either too weak and not creamy enough or delivery is

14
too slow (a drop at a time), this can be corrected by adjusting
the grinding adjustment dial (A5 - g. 13).
13
Please note!
The grinding adjustment dial must only be turned when the
coee grinder is in operation during the initial phase of coee
preparation.
Ifthecoeeis deliveredtoo slowly or not
at all, turn one click clockwise towards 7.
For fuller bodied creamier coee, turn
one click counterclockwise towards 1 (do
not turn more than one click at a time
otherwise the coee could be delivered
a drop at a time).
These adjustments will only be evident after at least 2 cups of
coee have been delivered. If this adjustment does not obtain
the desired result, turn the dial another click.
8.6 Tips for a hotter coee
For hotter coee, you should:
• perform a rinse cycle by selecting the "Rinsing" function in
the settings menu (section“7.1 Rinsing ”);
• warmthe cups with hot waterusing the hot waterfunction
(see section“10. Delivering hot water”);
• increase the coee temperature in the settings menu (B8)
(see section“7.10 Coee temperature ”).
9. MAKING CAPPUCCINOS AND MILKBASED
COFFEES
Please note!
• To avoidmilk with poor frothor large bubbles,alwaysclean
the milk container lid (D2) and hot water connection noz-
zle (A9) as described in sections“9.4 Cleaning the milk con-
tainer after use”,”14.10 Cleaning the milk container” and
“14.11 Cleaning the hot water/steam connection nozzle”.
9.1 Filling and attaching the milk container
1. Remove the lid (D2) (g. 14);
1514
MILK
2. Fill the milk container (D3) with a sucient quantity of milk,
not exceeding the MAX level marked on the container (g.
15). Each mark on the side of the container corresponds to
about 3.38 oz / 100 ml of milk;
Please note!
• For a denser more even froth, you must use skimmed or
partially skimmed milk at refrigerator temperature (about
41°F/5°C).
• If "Energy Saving" mode is enabled, you may have to wait
a few seconds before the beverage is delivered.
3. Make sure the milk intake tube (D4) is correctly inserted in
the bottom of the milk container lid (g. 16);
16 17
4. Place the lid back on the milk container;
5. If present, extract the hot water/steam spout (C6) by press-
ing the release button (C7) (g. 17);
6. Attach the milk container (D) to the connection nozzle (A9)
(g. 18) and push as far as it will go. The machine emits a
beep (if the beep function is enabled);

15
18 19
7. Place a suciently large cup under the brewing unit (A8)
and frothed milk spout (D5). Adjust the length of the milk
spout.To move it nearer the cup, simply pull it downwards
(g. 19).
8. Follow the instructions below for each function.
9.2 Adjusting the amount of froth
Turn the froth adjustmentdial(D1)toadjust the amount of froth
on the milk delivered while making cappuccinos and milk-based
coees.
Dial
position
Description Recommended for…
NO FROTH HOT MILK (not frothed) /
LATTE
MIN. FROTH LATTE MACCHIATO /
FLAT WHITE
MAX. FROTH CAPPUCCINO / CAPPUCCI
NO+/ CAPPUCCINO MIX
/ ESPRESSO MACCHIATO /
HOT MILK (frothed)
9.3 Making cappuccino and milk-based
coees automatically
1. Fill the milk container (D) and attach it as described above.
2. Select the required beverage:
Directly selected beverages:
• CAPPUCCINO (B10)
• LATTE MACCHIATO B11)
• LATTE B12)
• HOT MILK (B13)
Selectable from the beverage selection menu (B3):
• CAPPUCCINO+
• ESPRESSO MACCHIATO
• FLAT WHITE
• CAPPUCCINO MIX
3. A message on the display (B1) instructs you to turn the
froth adjustment dial (D1) according to the froth required
by the original recipe. Turn the dial on the milk container
lid (D2) and conrm the selection by pressing the selection
arrow (B2) corresponding to " OK".
4. After a few seconds, preparation begins automatically and
an image of the selected beverage appears on the display,
together with a progress bar which gradually lls as prepa-
ration progresses.
Please note: general indications when preparing all milk-
based beverages
• “ ESC”: press to interrupt preparation completely and
go back to the homepage.
• "STOP ": press to interrupt milk or coee delivery and
move on to the next delivery (if applicable) to complete the
beverage.
• At the end of delivery, to increase the quantity of milk or
coee in the cup, press EXTRA ".
• Preparation of each coee can be customized (see sections
“12. Customizing the beverages”and”13. Memorizing your
personal prole”).
• Do not leave the milk container out of the refrigerator for
long periods.The warmer the milk (41°F/ 5°C is ideal), the
poorer the quality of froth produced.
Once the coee has been made, the appliance is ready to make
the next beverage.
9.4 Cleaning the milk container after use
Important! Danger of burns
When cleaning the internal tubes of the milk container, a little
hot water and steam leak out of the frothed milk spout (D5).
Avoid contact with splashes of water.
Each time you use a milk function, "TURN MILK FROTH ADJUST-
MENT DIAL TO CLEAN POSITION" appears on the display and the
milk frother lid must be cleaned:
1. Leave the milk container (D) in the machine (you do not
need to empty it);
2120
CLEAN
2. Place a cup or other container under the frothed milk spout
(g. 21);

16
3. Turn the froth adjustment dial (D1) to "CLEAN" (g. 20).
"CLEANING UNDERWAY RECIPIENT UNDER SPOUT" appears
on the display (B1) together with a bar which gradually
lls as cleaning progresses. Cleaning stops automatically;
4. Turn the dial back to one of the froth selections;
5. Remove the milk container and always clean the steam
connection nozzle (A9) with a sponge (g. 22).
22
Please note!
• To prepare a number of cappuccinos or milk-based cof-
fees, clean the milk container after you have prepared
the last beverage only. To proceed with making the next
beverages, press " ESC". When the "CLEAN" message is
displayed.
• If you do not clean the milk container, the symbol ap-
pears on the display to remind you that it needs cleaning.
• The milk container can be kept in the refrigerator.
• In some cases, before cleaning you must wait for the appli-
ance to heat up.
10. DELIVERING HOT WATER
Important! Danger of burns.
Do not leave the appliance unattended while hot water is being
delivered.
1. Make sure the hot water/steam spout (C6) is attached cor-
rectly to the hot water/steam connection nozzle (A9);
2. Place a container under the spout (as close as possible to
avoid splashes);
3. Press the selection arrow (B2) corresponding to the " "
symbol (B3) to enter the menu;
4. Press the selection arrow (B2) corresponding to the
"NEXT>" symbol to display "HOTWATER";
5. Press the selection arrow corresponding to "HOT WATER".
The corresponding image appears on the display (B1), to-
gether with a progress bar which lls gradually as prepara-
tion proceeds;
6. The machine delivers hot water, then delivery stops auto-
matically. To interrupt hot water delivery manually, press
the selection arrow corresponding to " STOP" icon again.
Please note!
• If "Energy Saving" mode is active, you may have to wait a
few seconds before hot water is delivered.
• Preparation of each coee can be customized (see sections
“12. Customizing the beverages ”and”13. Memorizing
your personal prole”).
11. STEAM DELIVERY
Important! Danger of burns.
Do not leave the appliance unattended while steam is being
delivered.
1. Make sure the hot water/steam spout (C6) is attached cor-
rectly to the hot water/steam connection nozzle (A9);
2. Fill a container with the liquid to be heated or frothed and
immerse the hot water/steam spout in the liquid;
3. Press the selection arrow (B2) corresponding to the " "
symbol (B3) to enter the menu;
4. Press the selection arrow (B2) corresponding to the
"NEXT>" symbol to display "STEAM";
5. Press the selection arrow corresponding to " STEAM". The
corresponding image appears on the display (B1), togeth-
er with a progress bar which lls gradually as preparation
proceeds and after a few seconds, steam to heat the liquid
is delivered from the cappuccino maker;
6. When the required temperature or froth level is obtained,
interrupt steam delivery by pressing the selection arrow
corresponding to "STOP ".
Important!
Always stop steam delivery before extracting the container con-
taining the liquid to avoid burns from splashes.
Please note!
If "Energy Saving" mode is active, you may have to wait a few
seconds before the hot water is delivered.
11.1 Tips for using steam to froth milk
• When choosing the size of the container, bear in mind that
the liquid doubles or triples in volume.
• Foraricher denserfroth,useskimmed orpartially skimmed
milk at refrigerator temperature (about 41°F/ 5°C).
• For a creamier froth, rotate the container with slow move-
ments in an upward direction.
• To avoidmilk with poor frothor large bubbles,alwaysclean
the spout (C6) as described in the following section.
11.2 Cleaning the hot water/steam spout after
use
Always clean the hot water/steam spout (C6) after use to avoid
the build-up of milk residues and prevent it from clogging.

17
1. Place a container under the hot water/steam spout and de-
liver a little water (see section “10. Delivering hot water”).
To interrupt hot water delivery manually, press the selection
arrow corresponding to " STOP".
2. Wait a few minutes for the hot water/steam spout to cool
down, then extract (g. 17) by pressing the release button
(C7). Hold the spout with one hand and with the other,
turn the cappuccino maker and pull it downwards (g. 23).
2423
3. Also remove the steam connection nozzle by pulling it
downwards (g. 24).
4. Check the hole in the connection nozzle is not blocked. If
necessary, clean using a toothpick.
5. Wash all parts of the spout thoroughly with a sponge and
warm water.
6. Insert the connection nozzle and cappuccino maker on the
spout by pushing them upwards and turning them clock-
wise until they are attached.
12. CUSTOMIZING THE BEVERAGES
The strength (when required) and quantity of the drinks can be
customized.
1. Make sure the prole (B4) for which you want to customize
the beverage is selected.You can select "MY" beverages for
each of the 6 proles;
2. From the homepage, press the selection arrow (B2) corre-
sponding to " " (B6);
3. Select the beverage you want to customize (a directly
selected beverage or from the beverages selection menu
- B3) to enter the customizing screen. The corresponding
accessories must be inserted;
4. (Beverages withcoee only) "CHOOSE COFFEE STRENGTH":
Select the required strength by pressing the selection ar-
rows corresponding to "-" or "+" and press the selection
arrow corresponding to " OK";
5. "COFFEE QUANTITY, STOPTO SAVE": Preparation begins and
the appliance displays the quantity customizing screen in
the form of a vertical bar. The star alongside the bar rep-
resents the current quantity.
6. When the quantity reaches the minimum quantity you can
set, " STOP" appears on the display (B1).
7. When the required quantity is reached, press " STOP".
8. "SAVE NEW SETTINGS?": Press the selection arrow corre-
sponding to " OK" to save (or the selection arrow corre-
sponding to " ESC" to cancel).
The appliance conrms if the values have been saved or not
(depending on the previous selection). Press the selection arrow
corresponding to " OK".
The appliance goes back to the homepage.
Please note!
• Cappuccinos and milk-based coees: the coee
strength is saved rst, followed by the quantity of rst
milk, then coee;
• Hot water: the appliance delivers hot water. Press the se-
lection arrow (B2) corresponding to " STOP" to save the
required quantity.
• You can also customize the beverages by connecting with
the DeLonghi Coee Link App.
• Press " ESC" to exit programming. The values will not
be saved.
Beverage quantity table
Beverage Standard
quantity
Programmable
quantity
ESPRESSO 1.35  oz/
40 ml
0.68 - 6.09  oz/
20-180 ml
LONG 5.41  oz/
160 ml
3.89 - 8.45  oz/
115-250 ml
COFFEE 6.08  oz/
180 ml
3.38 - 8.11  oz/
100-240 ml
DOPPIO+ 4.06  oz/
120 ml
2.70 - 6.09  oz/
80-180 ml
HOT WATER 8.45  oz/
250 ml
0.68 - 15.55  oz/
20-460 ml
13. MEMORIZING YOUR PERSONAL PROFILE
The appliance allows you to memorise 6 dierent proles, each
associated with a dierent icon.
The customized "MY" beverages "STRENGTH" and "QUANTITY"
values are saved in each prole (see section “12. Customizing
the beverages ”). The order in which all the beverages are
displayed is based on the frequency of selection.
To select or enter a prole, press on the prole currently in
use (B4), press the selection arrow (B2) corresponding to the
"NEXT>" symbol until the required prole is displayed, then
press on the prole.

18
Please note!
• " GST" (GUEST) prole: select this prole to deliver bev-
erages with the default settings.The function is not
active.
• You can rename your personal prole by connecting with
the DeLonghi Coee Link App (only the rst three charac-
ters will be displayed).
To customize the prole icon, proceed as follows:
1. Press the selection arrow (B2) corresponding to the " "
symbol (B8) to enter the menu;
2. Scroll through the menu items by pressing the selection
arrow corresponding to "NEXT>" until "CUSTOMIZE PRO-
FILE" appears on the display;
3. Press the selection arrow corresponding to "CUSTOMIZE
PROFILE";
4. Press the selection arrow corresponding to the icon you
want to select (press the selection arrow corresponding to
"NEXT>" to display all the icons available);
5. Press the selection arrow corresponding to
" ESC" twice to go back to the homepage.
14. CLEANING
14.1 Cleaning the machine
The following parts of the machine must be cleaned regularly:
- the appliance’s internal circuit;
- coee grounds container (A10);
- drip tray (A14) and drip tray grille (A13);
- water tank (A16);
- brewing unit (A8);
- pre-ground coee funnel (A4);
- infuser (A19), accessible after opening the infuser door
(A18);
- milk container (D);
- hot water/steam connection nozzle (A9);
- control panel (B).
Important!
• Do not use solvents, abrasive detergents or alcohol to clean
the coee machine.With De’Longhi superautomatic coee
machines, you need not use chemical products to clean the
machine.
• None of the components of the appliance can be washed
in a dishwasher with the exception of the drip tray grille
(A13) and milk container (D).
• Do not use metal objects to remove dirt or coee deposits
as they could scratch metal or plastic surfaces.
14.2 Cleaning the machine's internal circuit
If the appliance is not used for more than 3/4 days, before using
it again, we strongly recommend switching it on and:
• performing 2/3 rinse cycles by selecting the "Rinse" func-
tion (section“7.1 Rinsing ”);
• delivering hot water for a few seconds (section“10. Deliv-
ering hot water”).
Please note!
After cleaning, it is normal for the grounds container (A10) to
contain water.
14.3 Cleaning the coee grounds container
When "EMPTY GROUNDS CONTAINER" appears on the display
(B1), the grounds container must be emptied and cleaned. The
appliance cannot be used to make coee until you have cleaned
the grounds container (A10). Even if not full, the empty grounds
container message is displayed 72 hours after the rst coee has
been prepared. For the 72 hours to be calculated correctly, the
machine must never be turned o with the main switch.
Important! Danger of burns
If you make a number of cappuccinos one after the other, the
metal cup tray (A11) becomes hot. Wait for it to cool down be-
fore touching it and handle it from the front only.
To clean (with the machine on):
• Remove the drip tray (A14) (g. 25), empty and clean.
25
• Empty the grounds container (A10) and clean thoroughly
to remove all residues left on the bottom.This can be done
using the spatula on the brush (C5) provided.
Important!
When removing the drip tray, the grounds container must be
emptied, even if it contains few grounds. If this is not done,
when you make the next coees, the grounds container may ll
up more than expected and clog the machine.

19
14.4 Cleaning the drip tray
26
Important!
The drip tray (A14) is tted with a level indicator (A12) (red)
showing the level of water it contains (g. 26). Before the in-
dicator protrudes from the cup tray (A11), the drip tray must
be emptied and cleaned otherwise the water may overow the
edge and damage the appliance, the surface it rests on or the
surrounding area.
To remove the drip tray, proceed as follows:
1. Remove the drip tray and the coee grounds container
(A10) (g. 25);
2. Remove the cup tray (A11) and drip tray grille (A13), then
empty the drip tray and grounds container and wash all
components.
3. Put the drip tray complete with grille and grounds contain-
er back in the appliance.
14.5 Cleaning the inside of the coee machine
Danger of electric shock!
Before cleaning internal parts, the machine must be turned o
(see section“6.Turning the appliance o”) and unplugged from
the mains power supply. Never immerse the coee machine in
water.
1. Check regularly (about once a month) that the inside of the
appliance (accessible after removing the drip tray - A14)
is not dirty. If necessary, remove coee deposits with the
brush (C5) supplied and a sponge.
2. Remove all the residues with a vacuum cleaner (g. 27).
27
14.6 Cleaning the water tank
1. Clean the water tank (A16) regularly (about once a month)
and whenever you replace the water softener lter (C4) (if
provided) with a damp cloth and a little mild washing up
liquid. Rinse thoroughly before lling the tank and putting
it back in the appliance;
2. Removethe lter (ifpresent)and rinse with running water;
3. Replace the lter (if provided), ll the tank with fresh
water and replace the tank;
4. (Models with water softener lter only) Deliver about 3.38
oz /100ml of hot water to reactivate the lter.
14.7 Cleaning the brewing unit
1. Clean the brewing unit (A8) regularly with a sponge or
cloth (g. 28A);
2. Check that the holes in the brewing unit are not clogged.
If necessary, remove coee deposits with a toothpick (g.
28B).
28B
28A
14.8 Cleaning the pre-ground coee funnel
Check regularly (about once a month) that the pre-ground
coee funnel (A4) is not clogged. If necessary, remove coee
deposits with the brush (C5) supplied.

20
14.9 Cleaning the infuser
The infuser (A19) must be cleaned at least once a month.
Important!
The infuser may not be extracted when the machine is on.
29
PUSH
30
PUSH
1. Make sure the machine is correctly turned o (see section
“6.Turning the appliance o”);
2. Remove the water tank (A16) (g. 3);
3. Open the infuser door (A18) (g. 29) on the right side of
the appliance;
4. Press the two colored release buttons inwards and at the
same time pull the infuser outwards (g. 30);
3231
5. Soak the infuser in water for about 5 minutes, then rinse
under the tap;
Important!
RINSEWITH WATER ONLY
NO SOAP  NO DISHWASHER
Clean the infuser without using washing up soap as it
could be damaged.
6. Use the brush (C5) to remove any coee residues left in the
infuser housing, visible through the infuser door;
7. After cleaning, replace the infuser by sliding it onto the
internal support (g. 31), then push the PUSH symbol fully
in until it clicks into place;
Please note!
If the infuser is dicult to insert, before insertion, adapt it to the
right size by pressing the two levers shown in g. 32.
8. Once inserted, make sure the two colored buttons have
snapped out (g. 33);
33
PUSH
9. Close the infuser door;
10. Put the water tank back.
14.10 Cleaning the milk container
To keep the frother ecient, clean the milk container (D) every
two days as described below:
1. Remove the lid (D2);
2. Remove the milk spout (D5) and intake tube (D4) (g. 34);
3. Turn the frothadjustmentdial (D1) counterclockwisetothe
"INSERT" position (g. 34) and pull it o upwards;
34
4. Wash all the components thoroughly with hot water and
mild soap. All components are dishwasher safe, plac-
ing them in the top basket of the dishwasher.
Make sure there are no milk residues on the hollow and
groove under the dial (g. 35). If necessary, scrape the
groove with a toothpick;