DeLonghi DEIND64P Quick guide

DE’LONGHI
COOKING
INSTALLATION and SERVICE INSTRUCTIONS
USE and CARE INSTRUCTIONS
DEIND64P
TOUCH CONTROL INDUCTION COOKING HOB
distributed by
ELBA Appliances Australia
(a Division of Fisher&Paykel Australia)

2
Dear Customer,
Thank you for having purchased and given your preference
to our product.
The safety precautions and recommendations reported
below are for your own safety and that of others. They
will also provide a means by which to make full use of the
features offered by your appliance.
Please preserve this booklet carefully. It may be useful
in future, either to yourself or to others in the event that
doubts should arise relating to its operation.
This appliance must be used only for the task it
has explicitly been designed for, that is for cooking
foodstuffs. Any other form of usage is to be considered
as inappropriate and therefore dangerous.
The manufacturer declines all responsibility in the
event of damage caused by improper, incorrect or
illogical use of the appliance.
This appliance has been designed and constructed in accordance with the following
codes and specications:
AS/NZS 60335.1 Household and similar electrical appliances - Safety General
requirements
AS/NSZ 60335.2.6
Safety Particular requirements for stationary cooking ranges, hobs,
ovens and similar appliances
AS/NZS CISPR 14.1 Electromagnetic Compatibility Requirements

3
IMPORTANTSAFETYPRECAUTIONSANDRECOMMENDATIONS
IMPORTANT: This appliance is designed and manufactured
solely for the cooking of domestic (household) food and is
not suitable for any non domestic application and therefore
should not be used in a commercial environment.
The appliance guarantee will be void if the appliance is used
within a non domestic environment i.e. a semi commercial,
commercial or communal environment.
Read the instructions carefully before installing and using
the appliance.
• This appliance has been designed and manufactured in
compliance with the applicable standards for the household
cooking products and it fullls all the safety requirements shown
in this manual, including those for surface temperatures.
Some people with sensitive skin may have a more pronounced
temperature perception with some components although these
parts are within the limits allowed by the norms.
The complete safety of the appliance also depends on the correct
use, we therefore recommend to always pay a extreme attention
while using the product, especially in the presence of children.
• It is mandatory to connect the appliance to the grounding system.
This appliance incorporates an earth connection for functional
purposes only.
• After having unpacked the appliance, check to ensure that it is
not damaged.
In case of doubt, do not use it and consult your supplier or a
professionally qualied technician.
• Packing elements (i.e. plastic bags, polystyrene foam, nails,
packing straps, etc.) should not be left around within easy reach
of children, as these may cause serious injuries.
• Some appliances are supplied with a protective lm on steel and
aluminium parts. Thislmmustberemovedbeforeusingthe
appliance.

4
• IMPORTANT: The use of suitable protective clothing/gloves is
recommended when handling or cleaning this appliance.
• Do not attempt to modify the technical characteristics of
the appliance as this may become dangerous to use. The
manufacturer declines all responsibility for any inconvenience
resulting from the inobservance of this condition.
• Do not operate your appliance by means of an external timer or
separate remote-control system.
• Do not carry out cleaning or maintenance operations on the
appliance without having previously disconnected it from the
electric power supply.
• Do not use a steam cleaner because the moisture can get into
the appliance therefore making it unsafe.
• Do not cover the hob with aluminium foils.
• Do not touch the appliance with wet or damp hands (or feet).
• Do not use the appliance whilst in bare feet.
• If you should decide not to use this appliance any longer (or
decide to substitute another model), before disposing of it, it
is recommended that it be made inoperative in an appropriate
manner in accordance to health and environmental protection
regulations, ensuring in particular that all potentially hazardous
parts be made harmless, especially in relation to children who
could play with unused appliances.
• The various components of the appliance are recyclable. Dispose
of them in accordance with the regulations in force in your country.
If the appliance is to be scrapped, remove the power cord.
• After use, ensure that the controls are in the off position.
• Children less than 8 years of age shall be kept away unless
continuously supervised.
• This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.

5
• The manufacturer declines all liability for injury to persons or
damage to property caused by incorrect or improper use of the
appliance.
• WARNING: During use the appliance and its accessible parts
become hot; they remain hot for some time after use.
– Care should be taken to avoid touching heating elements on
the hob.
– To avoid burns and scalds, young children should be kept
away.
• Make sure that electrical cables connecting other appliances in
the proximity of the cooktop cannot come into contact with the
hob.
• WARNING: Unattended cooking on a hob with fat or oil can be
dangerous and may result in re. NEVER try to extinguish a re
with water, but switch off the appliance and then cover ame e.g.
with a lid or a re blanket.
• WARNING: Danger of re: do not store items on the cooking
surfaces.
• Do not place or leave empty pans on the glass ceramic hob.
• Do not allow heavy or sharp objects to drop on the glass ceramic
hob.
• Do not scratch the hob with sharp objects. Don’t use the hob as
a work surface.
• WARNING: If the hob is cracked or otherwise damaged by falling
objects etc., disconnect the appliance from the electrical power
supply to avoid the possibility of electric shock and call Customer
Service.
• WARNING: When correctly installed, your product meets all
safety requirements laid down for this type of product category.
However special care should be taken around the underneath
of the appliance as this area is not designed or intended to be
touched and may contain sharp or rough edges, that may cause
injury.
• CAUTION: The cooking process has to be supervised. A short
term cooking process has to be supervised continuously.

6
• If the power supply cable is damaged, it must be replaced only
by an authorized service agent in order to avoid a hazard.
• If the appliance is not tted with a supply cord and a plug, or with
other means for disconnection from the supply mains having a
contact separation in all poles that provide full disconnection under
overvoltage category III conditions, means for disconnection
must be incorporated in the xed wiring in accordance with the
wiring rules.
• WARNING: The appliance and its accessible parts become hot
during use.
Care should be taken to avoid touching heating elements.
Children less than 8 years of age shall be kept away unless
continuously supervised.
• WARNING: Use only hob guards designed by the manufacturer
of the cooking appliance or indicated by the manufacturer of the
appliance in the instructions for use as suitable or hob guards
incorporated in the appliance. The use of inappropriate guards
can cause accidents.
• INDUCTION HOBS:
– Metallic objects such as knives, forks, spoons and lids should
not be placed on the hob surface since they can get hot.
– Do not use metallic kitchen utensils (e.g. ladles). It is preferable
to use plastic or wood kitchen utensils.
– Please use pans of recommended size (see minimum pan
diameter recommended). It is not advisable to use pans
smaller than the cooking zone. The pans have to be placed in
the centre of the cooking zone.
– Do not use defective pans or pans with a curved bottom.
– Please use suitable pans marked for induction cooking.
– Please keep your distance from the electromagnetic elds by
standing 5-10 cm from the cooking zones. When possible use
the rear cooking zones.
– Magnetic objects (e.g. credit cards, oppy disks, memory
cards) and electronic instruments (e.g. computers) should not
be placed near the induction hob.
– The heating of magnetic tins is forbidden! Closed tins may

7
explode by exceeding pressure while heating. There is a
burning risk with open tins as well, because the integrated
temperature protection will not work correctly.
–IMPORTANT WARNING: The induction hob complies
with the applicable Standards for domestic cooking
appliances. Therefore it should not interfere with other
electronic units. Persons with cardiac pacemakers or any
other electrical implants must check with their doctor if
they can use an induction cooking system (and check any
possible interferences with the implants).

8
USE OF THE APPLIANCE, ENERGY SAVING TIPS
HOB, INDUCTION COOKING ZONES AND/OR AREAS
• To save electricity, use lids whenever possible.
• When the pan comes to the boil, turn the heat down to the level desired.
• Please use suitable pans marked for induction cooking. Some cookware available
on the market has an effective ferromagnetic area which is much smaller than the
diameter of the pan itself. Avoid using this cookware because the induction cooktop
may not function properly or may be damaged.
• Always use pans/coffee pots with thick, completely at bottom. Do not use pans/coffee
pots with concave or convex bottom; these could cause overheating of the cooking
zone.
• Important: Do not use pots/coffee pot adaptors.
TECHNICAL SPECIFICATIONS
Cooktop model DEIND64P
Cooking zones 4 induction zones
Supply voltage 220-240 V~, 50-60 Hz
Total power (maximum total power of the cooktop). 2200 W
Cooktop dimensions W x D x H (mm) 590 x 520 x 55
Cut-out dimensions W x D (mm) 560 x 490
ENERGY CONSUMPTION OF THE COOKING ZONES
Position Symbol Value Unit
Model identication DEIND64P
Trade mark De’Longhi
Type of hob Electric
built-in
cooktop
Number of cooking zones 4
Heating technology Induction
Diameter of useful surface
area per electric heated
cooking zone, rounded to
the nearest 5mm
Rear left Ø 18,0 cm
Rear right Ø 18,0 cm
Front left Ø 18,0 cm
Front right Ø 18,0 cm
Energy consumption per
cooking zone calculated per
kg
Rear left 193,5 Wh/kg
Rear right 197.2 Wh/kg
Front left 192,3 Wh/kg
Front right 195.6 Wh/kg
Energy consumption for the
hob calculated per kg 194,7 Wh/kg

9
Advice for
the installer

10
IMPORTANT :
• This appliance is to be installed only by an authorised person according to the
current local regulations and in observation of the manufacturer’s instructions.
• Incorrect installation, for which the manufacturer accepts no responsibility, may
cause personal injury of damage.
• This appliance shall only be serviced by authorized personnel.
• Always disconnect the cooktop from mains power supply before carrying out any
maintenance operations or repairs.
WARNING !
• The appliance must be housed in heat resistant units.
• We would point out that the adhesive which bonds the plastic laminate to the furniture
must withstand temperatures not less than 150 °C to avoid delamination.
• The walls of the units must be capable of resisting temperatures of 75 °C above room
temperature.
INSTALLATION
1
This cooktop can be built into a working surface at least 30 mm thick and at least 590 mm
deep.
In order to install the cooktop into the kitchen xture, a hole with the dimensions shown in
gure 1.1 has to be made, keeping in consideration the following:
• A clearance of minimum 50 mm must be left around the hole.
• The cooktop shall not be installed directly above a dishwasher, fridge, freezer, washing
machine or clothes dryer, as the humidity may damage the cooktop electronics.
• If the cooktop is installed above an oven, the oven shall be provided with cooling fan.
The two appliances should be connected to the electrical supply with independent
connections.
• IMPORTANT WARNING! This cooktop requires adequate supply of fresh, cool air
to fully function. The base of the cooktop must have direct unrestricted ventilation
fromtheroomwherethecooktopisinstalled.Followtherequirementsofgure
1.2. Always ensure that the air inlet and outlet openings are not obstructed.
• There must be a distance of at least 760 mm between the cooktop and any wall
cupboard or extractor hood positioned immediately above.
• If the cooktop is installed above a drawer or cupboard space, a thermal protection
barrier has to be tted below the base of the hob (follow the requirements for the
correct ventilation of the appliance).
• The coatings of the walls of the unit or appliances near the cooktop must be heat
resistant.
• Donotinstalltheappliancenearinammablematerials(eg.curtains).

11
L (mm) W (mm) H (mm) D (mm) A (mm) B (mm) X (mm)
590 520 55 51 560 490 min. 50
A (mm) B (mm) C (mm) D E
760 min. 50 min. 20 Air intake Air outlet 5 mm
X
B
X
X
X
A
LW
H
D
Gasket
Fig. 1.1
Fig. 1.2
D
C
B
A
E

12
FASTENING THE COOKTOP
Before you install the cooktop, make sure that the work surface is square and level, and no
structural members interfere with space requirements previously indicated.
Each cooktop is supplied with a set of xing springs and screws to fasten it into a working
surface at least 30 mm thick.
The kit includes 4 springs “B” and 4 screws “A” (see gure 1.3).
The gasket to seal the cooktop on the installation unit is already pre-installed around the
lower edge of the hob itself, make sure it is in place and intact.
The sealing gasket is used to ensure a perfect sealing between the appliance and the unit.
Incorrect installation may cause irreparable damage to the appliance.
• Cut the unit.
• Turn the cooktop upside down and rest it gently on a soft surface.
• Install the xing springs “B” by using the screws “A”. Make sure that the springs are
correctly tted as shown in gure 1.3.
• Put the cooktop into the hole cut into the unit and position it correctly.
C
B
DA
B
A
D
Fig. 1.3
A B C D
Fixing screw Fixing spring Hole for screw Bottom case
Glass
Fixing spring
Fixing screw
Bottom case Worktop / kitchen cabinet

13
ELECTRICAL CONNECTION
2
IMPORTANT: Installation must be carried out according to the manufacturer’s
instructions. Incorrect installation may cause harm and damage to people,
animals or property, for which the manufacturer accepts no responsibility.
Before carrying out any work on the electrical section of the appliance, it must be
disconnected from the mains.
Connection to a good earth wiring system is absolutely essential. This appliance
incorporates an earth connection for functional purposes only.
The manufacturer accepts no responsibility for any inconvenience caused by
failure to comply with this rule.
If the hob surface is cracked disconnect the appliance from the mains and contact
the After-Sales Service.
If the power supply cable is damaged, it must be replaced only by an authorized
service agent in order to avoid a hazard.
ELECTRICAL REQUIREMENTS
• Connection to the electric power supply must be carried out by a qualied technician
following the appropriate safety regulations and according to the local Regulations in
force.
• The appliance must be connected to the mains checking that the voltage corresponds
to the value given in the rating plate and that the electrical cable sections can withstand
the load specied on the plate.
• This cooktop has been designed with a power limiter to ensure the cooktop does not
exceed 2200W, allowing it to be plugged into a standard 10amp power socket, and it
is provided with a 10A power plug.
The plug must be inserted into a socket connected to the earth system in compliance
with safety rules. To connect the hob to the mains power supply, do not use adapters,
reducers, or branching devices, as they can cause overheating and re.
• The appliance can be connected directly to the mains placing a two pole switch with
minimum opening between the contacts of 3 mm between the appliance and the mains.
• A suitable isolating switch providing full disconnection from the mains power supply
(under overvoltage category III conditions) shall be incorporated in the permanent
wiring, mounted and positioned to comply with the local wiring rules and regulations.
The isolating switch must be of an approved type and provide a 3 mm air gap contact
separation in all poles (or in all active [phase] conductors if the local wiring rules allow
for this variation of the requirements).
In Australia and New Zealand, a switch of the approved type with a 3 mm air gap must
be installed in the active (phase) conductor of the xed wiring.
• The power supply cable must not touch the hot parts and must be positioned so that it
does not exceed 50°C above ambient.
• Once the appliance has been installed, the switch or socket must always be in a
accessible position.
• The appliance must be powered individually; any other appliance installed nearby
must be powered separately.
N.B. For connections to the mains power supply, never use adaptors, reductions or
multiplepowerpointsasthesemayoverheatandcatchre.
In the event that installation should require modications to the mains supply wiring system,
it is recommended that a qualied technician be called to carry out substitution.
He should also check that the domestic electrical system is suitable for the power absorbed
by the appliance.

14
Fig. 2.1
Power cord
Power supply
Black
L
N
V
V
V
V = 220-240 V~
V1 = 400 V~
N
Brown
Grey
Blue
Yellow/Green
Power supply
Power supply
Power supply
Power cord
Power cord
Power cord
ELECTRICAL CONNECTION DIAGRAMS
Black
L1
L2
N2
N1Brown
Grey
Blue
Yellow/Green
Black
Black
L1
L1
L2
L2
V1
V1
Brown
Brown
Grey
Grey
Blue
Blue
Yellow/Green
Yellow/Green
V
V

15
Advice for
the user

16
FEATURES AND TECHNICAL DATA
1
• WARNING: If the hob surface is cracked disconnect the appliance from the
mains and contact the After-Sales Service.
• Metallic objects such as knives, forks, spoons and lids should not be placed
on the hob surface since they can get hot.
• Do not cover the hob with aluminium foils.
COOKING ZONES
1. Induction cooking zone Ø 180 mm - 2000 W
2. Induction cooking zone Ø 180 mm - 1500 W
3. Induction cooking zone Ø 180 mm - 2000 W
4. Induction cooking zone Ø 180 mm - 1500 W
Note: The nominal powers may vary depending on the size and material of the pots used.
TOUCH-CONTROL DESCRIPTION
5. ON/OFF key
6. Cooking zones selection keys
7. Selection keys for the power level adjustment or for setting the timer/automatic cooking
programming
8. Pause function (“STOP+GO”) selection key
9. Child safety (key lock) selection key
10. Timer/automatic cooking programming selection key
Fig. 1.1
1
2
6 7
10 9 8
5
3
4

17
USE OF INDUCTION HOB
2
In the front central area of the hob, the displays of the touch control system indicate:
= Cooking zone Off (not activated)
oppure
= Cooking zone On (activated but not operating).
If all the zones are in zero setting, the touch control system switches off
automatically (touch controls Off) after about 60 seconds.
÷= Power levels
= Pause function (“STOP+GO”) enabled
= Cooking zone remaining heat indicator
= Pan detection indicator
= Child safety (key lock) enabled
÷ = Timer/automatic cooking programming display
The ceramic hob is tted with induction cooking zones.
These zones, shown by painted areas on the ceramic surface, are controlled by a touch
control system.
Fig. 2.1

18
INDUCTION COOKING SYSTEM
When your induction hob is switched on and a cooking zone has been selected, the
electronic circuits produce induced currents that instantaneously heat the bottom of the
pan which then transfers this heat to the food.
Cooking takes place with hardly any energy loss between the induction hob and the food.
Your induction hob operates only if a correct pan with the right features is placed on a
cooking zone. Please refer to “COOKWARE/COFFEE POT FOR INDUCTION COOKING”.
If the pan detection symbol appears on the display, your pan is not suitable and your
induction hob will not operate. After about 1 minute without detecting any pan, the cooking
zone switches Off automatically.
If the induction cooktop emits a humming noise when a zone is used on a high power level,
this phenomenon is normal as it is caused by the induction cooking tecnology.
The noise should weaken or disappear completely when the power level is decreased.
Fig. 2.2
Pan for
induction
cooking
Magnetic eld Glass-ceramic
surface
Induction
coil
Induced currents

19
USING THE TOUCH CONTROLS
• The controls respond to touch, so you don’t
need to apply any pressure.
• Use the ball of your nger, not its tip.
• You will hear a beep each time a touch is
registered.
• Make sure the controls are always clean, dry,
and that there is no object (e.g. a utensil or
a cloth) covering them. Even a thin lm of water may make the controls difcult to
operate.
REMAINING HEAT INDICATORS
When the temperature of a cooking zone is still hot, the relevant remaining heat indicator
lights up on the display to alert you of the hot surface.
Avoid touching the hob surface over the cooking area. Please pay special attention to
children.
When the is lit on the display, it is still possible to start cooking again; just operate the
cooking zone as indicated in the chapter POWER IGNITION AND ADJUSTMENT OF A
COOKING ZONE.
OVER-TEMPERATURE PROTECTION
The induction cooktop is tted with a temperature sensor to monitor the temperature inside
the appliance. When an excessive temperature is detected, the cooktop switches Off
automatically.
Inside the cooktop there is a cooling fan motor that switches On to prevent the electronics
from overheating; it may continue to operate even after the cooktop has been turned Off.
Do not disconnect the cooktop from the electrical supply if the cooling fan is operating, the
appliance could be damaged.
PROTECTION AGAINST CONTINUOUS ACCIDENTAL ACTIVATION OF
THE TOUCH CONTROL KEYS (CAUSED BY OVERFLOWING LIQUIDS OR
OBJECTS LEFT ON THE CONTROL PANEL AREA)
The hob switches off automatically within 10 seconds:
• if an object (e.g. fork, spoon, ...) is placed on the control keys;
• in case of overow of liquids on the control keys.
Dry the spilled liquids or remove the object before using the cooktop again.

20
COOKWARE/COFFEE POT FOR INDUCTION COOKING
The induction cooking system OPERATES ONLY if using correct cookware/coffee pot
suitable for induction cooking (normally identied by an induction symbol on the bottom
of the cookware/coffee pot). The use of not suitable cookware may cause damage to the
appliance.
The bottom of the pan/coffee pot has to be ferromagnetic to generate the electromagnetic
eld necessary for the heating process (meaning a magnet has to stick to the bottom of the
pan/coffee pot).
Pans/coffee pots made from the following materials are not suitable:
• glass, wood, porcelain, ceramic, stoneware;
• pure stainless steel, aluminium or copper without magnetic bottom.
To check if a pan/coffee pot is suitable or not:
• Test the bottom of the pan/coffee pot with a magnet: if the magnet sticks, the pan is
suitable.
• If a magnet is not available pour a small amount of water inside the pan/coffee pot and
place the pan on a cooking zone. Switch on the cooking zone: if the symbol (pan
detection) appears on the cooking zone display (instead of the power level), the pan/
coffee pot is not suitable.
Important: Do not use pots/coffee pot adaptors; this could cause an overheating and
possible damage to the appliance.
Important note: the cooking zones will not operate if the pan/coffee pot diameter is too
small. ( pan detection symbol will appear on the cooking zone display). To correctly use
the cooking zones follow the indications given in the following table:
Induction cooking zone Minimum pan diameter recommended
(referred to the bottom of the pan/coffee pot)
Cooking zone Ø 180 mm 120 mm
IMPORTANT: Some cookware available on the market is not of good quality or has an
effective ferromagnetic area which is much smaller than the diameter of the pan itself.
Avoid using this cookware because the induction cooktop may not function properly or may
be damaged.
Pay attention: The pan/coffee pot shall always be centred over the middle of the cooking
zone.
Pay attention: If using a grill pan do not select the maximum level for a too long time, the
pan may become deformed due to the excessive heat. Always use pans with thick bottom.
It is possible to use oversized pans/coffee pots but its bottom shall not touch the other
cooking zone.
Always use pans/coffee pots with thick, completely at bottom.
Do not use pans/coffee pots with concave, convex or rough bottom; these could cause
overheating of the cooking zone.
Note: Some types of pans/coffee pots could cause noise when used on an induction
cooking zone. The noise does not mean any failure on the appliance and does not inuence
the cooking operation.
Always lift pans off the induction hob – do not slide, or they may scratch the glass.