Delta Electronics Optical Transceiver Module OPT-155Bxxxxxx User manual

OPT-155Bxxxxxx
DELTA ELECTRONICS, INC.
http://www.deltaww.com 1 Jan., 2008
Rev.：0H
155Mbps 1x9 SC Duplex Optical Transceiver Module for
Fast Ethernet, ATM, SONET/OC-3, SDH/STM-1
Features：
 Full Compliance with the Optical Performance
Requirements of the ATM 100Mbps and 100
Base-FX Version of IEEE 802.3u.
 Industry Standard 1x9 Footprint and Duplex
SC Connector Interface.
 Single 5V（OPT-155B1xxxxx）or 3.3V
（OPT-155B2xxxxx）Power Supply.
 PECL Differential Inputs and Outputs.
 PECL Receiver Signal Detect Indicator.
 RoHS Compliance.
 Wave Solder and Aqueous Wash Process
Compatible.
Description：
The OPT-155Bxxxxxx series are 1x9 optical
transceiver modules designed expressly for
high-speed communication applications that require
rates of up to 155Mbps. They are all compliant with
the SONET/SDH standards.
The OPT-155Bxxxxxx transceivers are supplied in
industry standard 1x9 SIP package style with duplex
SC connector.
The OPT-155Bxxxxxx also includes a Signal-Detect
circuit that provides PECL logic output state.
The OPT-155Bxxxxxx transceivers can meet Class-1
eye safety products and effective distance depending
on ITU-T G.957 standard or power penalty.
The transmitter sections utilize 1310nm Edge Emitting
InGaAsP Laser Diode. This Laser Diode is packaged
in the optical subassembly portion of the transmitter
section. A custom silicon IC that converts differential
PECL logical signals into an analog LD driving current
drives it.
The receiver sections utilize InGaAs PIN photodiodes
coupled into a custom silicon trans-impedance
preamplifier IC. These are packaged in the optical
subassembly portion of receiver.
These PIN / Preamplifier combinations are coupled
into a custom quantizer IC which provides the final
pulse shaping for the logic output and the Signal
Detect function. The data output is differential. The
signal detect output is single-ended.
Application：
 Single-mode Fiber Backbone Links.
 Fast Ethernet and ATM Compatible.
 Single-mode Fiber Media Converter.

OPT-155Bxxxxxx
DELTA ELECTRONICS, INC.
http://www.deltaww.com 2 Jan., 2008
Rev.：0H
Absolute Maximum Ratings
Parameter Symbol Min. Typ. Max. Unit Note
Storage Temperature Ts -40 85 ºC
Lead Soldering Temperature TSOLD 260 ºC
Lead Soldering Time tSOLD 10 Sec.
Supply Voltage VCC 0 6 V
Recommended Operating Conditions
Parameter Symbol Min. Typ. Max. Unit Note
Data Rate 100 155.52 200 Mbps
Ambient Operating Temperature TA0 70 ºC 1
Supply Voltage
OPT-155B1xxxxx
OPT-155B2xxxxx VCC
4.75
3.15
5
3.3
5.25
3.45 V
Note: See “Order Information” for detail
Electrical Characteristics
Parameter Symbol Min. Typ. Max. Unit Note
Transmitter
Transmitter Data Input Voltage-Low VIL-VCC -1.81 -1.48 V
Transmitter Data Input Voltage-High VIH-VCC -1.16 -0.88 V
Receiver
Data Output Voltage-Low VOL-VCC -1.95 -1.62 V
Data Output Voltage-High VOH-VCC -1.045 -0.74 V
SD Output Voltage-Low VSDL-VCC -1.95 -1.62 V
SD Output Voltage-High VSDH-VCC -1.045 -0.74 V
Optical Characteristics
（Data Rate = 155.52Mbps, PRBS=223-1, NRZ, 9/125um SMF）
Parameter Symbol Min. Typ. Max. Unit Note
Transmitter
Supply Current Icc 165 mA
-20 -15 OPT-155BxHxxxx
-15 -8 OPT-155BxJxxxx
-8 -5 OPT-155BxLxxxx
Mean Launch Power PO
-5 0
dBm
OPT-155BxMxxxx
8.2 OPT-155BxHxxxx
8.2 OPT-155BxJxxxx
8.2 OPT-155BxLxxxx
Optical Extinction Ratio E.R.
10
dB
OPT-155BxMxxxx
Center Wavelength λC1270 1310 1360 nm
7.7 OPT-155BxHxxxx
7.7 OPT-155BxJxxxx
7.7 OPT-155BxLxxxx
Spectral Width (RMS) σ
3
nm
OPT-155BxMxxxx
Output Eye Diagram Compliant with ITU-T recommendation G.957
Receiver
Supply Current Icc 145 mA
-31 OPT-155BxHxxxx
-31 OPT-155BxJxxxx
-31 OPT-155BxLxxxx
Sensitivity PIN
-34
dBm
OPT-155BxMxxxx
Overload PSAT -8 dBm
Signal Detect-Asserted PA-31 dBm OPT-155BxHxxxx

OPT-155Bxxxxxx
DELTA ELECTRONICS, INC.
http://www.deltaww.com 3 Jan., 2008
Rev.：0H
-31 OPT-155BxJxxxx
-31 OPT-155BxLxxxx
-34 OPT-155BxMxxxx
Signal Detect-DeAsserted PD-45 dBm
Signal Detect-Hysteresis PA-PD0.5 dB
Notes: The sensitivity is provided at a BER of 1×10-10 or better with an input signal consisting of 155Mbps, 223-1
PRBS and E.R.=9dB.
Mask of the eye diagram for the optical transmit signal

OPT-155Bxxxxxx
DELTA ELECTRONICS, INC.
http://www.deltaww.com 4 Jan., 2008
Rev.：0H
Pin Definition
PIN Symbol Functional description
1 GND Receiver Signal Ground
2 RD (+) Receiver Data Out Non-inverted (LVPECL or PECL)
3 RD (-) Receiver Data Out Inverted (LVPECL or PECL)
4 SD
Receiver Signal Detect (LVPECL、PECL)
5 VccR Receiver Power Supply
6 VccT Transmitter Power Supply
7 TD (-) Transmitter Data In Inverted (LVPECL or PECL)
8 TD (+) Transmitter Data In Non-inverted (LVPECL or PECL)
9 GND Transmitter Signal Ground
Pin Descriptions
Pin 1 Receiver Signal Ground, GND
Directly connect these pins to the ground plane.
Pin 2 Receiver Data Out Non-inverted (LVPECL), RD (+)
PECL logic family. Output external biased and internal DC coupled.
Pin 3 Receiver Data Out Inverted (LVPECL), RD (-)
PECL logic family. Output external biased and internal DC coupled.
Pin 4 Receiver Signal Detect (LVPECL), SD
PECL logic family. Normal Operation: Logic “1” Output; Fault Condition: Logic”0” Output.
Pin 5 Receiver Power Supply, VccR
Provide +3.3V dc power supply.
Pin 6 Transmitter Power Supply, VccT
Provide +3.3V dc power supply.
Pin 7 Transmitter Data In Inverted (LVPECL), TD (-)
Pin 7 Transmitter Data Input Inverted (LVPECL), TD (-).
Pin 8 Transmitter Data In Non-inverted (LVPECL), TD (+)
Pin 8 Transmitter Data Input Non-inverted (LVPECL), TD (+).
Pin 9 Transmitter Signal Ground, GND
Directly connect these pins to the ground plane.

OPT-155Bxxxxxx
DELTA ELECTRONICS, INC.
http://www.deltaww.com 5 Jan., 2008
Rev.：0H
Recommended Circuit Schematic
R1=R3=82 ohm (3.3V),68 ohm(5V)
R2=R4=130 ohm (3.3V),191 ohm (5V)
R5=R6=150 ohm (3.3V),270 ohm (5V)
R7=130 ohm (3.3V PECL),82 ohm(5V),NC (TTL)
R8=82 ohm (3.3V PECL),130 ohm(5V),NC (TTL)
C1=C2=C3=C4=C5=C6=C7=100 nF
C8=C9=10uF
L1=L2=1uH

OPT-155Bxxxxxx
DELTA ELECTRONICS, INC.
http://www.deltaww.com 6 Jan., 2008
Rev.：0H
Package Outline Drawing

OPT-155Bxxxxxx
DELTA ELECTRONICS, INC.
http://www.deltaww.com 7 Jan., 2008
Rev.：0H
Regulatory Compliance
Feature Reference Performance
Electromagnetic Interference
(EMI) FCC Class B
EN 55022 Class B (CISPR 22A)
Radio Frequency
Electromagnetic Field EN 61000-4-3
IEC 1000-4-3
Electrostatic Discharge to the
Duplex LC Receptacle EN 61000-4-2
IEC 1000-4-2
IEC 801.2
Electrostatic Discharge to the
Electrical Pins MIL-STD-883E Method 3015.7
(1) Satisfied with electrical
characteristics of product
spec.
(2) No physical damage
Eye Safety US FDA CDRH AEL Class 1
EN 60950: 2000
EN 60825-1: 1994+A11+A2
EN 60825-2: 2000
CDRH File # 0321539-00
TUV Certificate No. R50032471
Component Recognition Underwriters Laboratories and
Canadian Standards Association Joint
Component Recognition for Information
Technology Equipment Including
Electrical Business Equipment
UL File # E239394
Order information
OPT- 155BX1X2X3X4X5X6
X1Power Supply Voltage and SD Level
1: 5.0V, PECL SD Level
2: 3.3V, PECL SD Level
X4RoHS
Blank: Non-RoHS Compliant
R: RoHS Compliant
X2Distance
J: 15km
M: 40km
X5Performance
Blank: Old Design
A: New Design
X3
Data Coupling
1: 1x9 SC DC/DC
X6Temperature
Blank: 0 to +70 degree C
H: -10 to + 85 degree C
T: -40 to + 85 degree C
Appendix A．Document Revision
Version No. Date Description
0G 2006-11 Release
0H 2008-01
Update “Recommended Circuit Schematic”，
Correct SD Output Voltage 、Pin Definition、Package Outline、Order
Information