Delta Cozy Crib User manual

AUGUST 14, 2013, 24309 , R0
Style #:
Lot:
Date:
___________
___________
___________
©2013 DELTA ENTERPRISE CORP.
A
Cozy Crib
Conforms to
ASTM F406
Safety Standards
Consumer Care:
www.DeltaChildren.com
Delta Children’s Products
114 West 26th Street
New York, NY 10001
Tele.212-645-9033
FACTORYREV
THIS PRODUCT IS NOT INTENDED FOR INSTITUTIONAL OR COMMERCIAL USE.
To register your product for important safety alerts and updates to your product please
visit www.DeltaChildren.com and click on Product Registration.
When contacting Delta Consumer Care please reference
the above information. Before contacting Delta Consumer
Care please ensure that the information above matches the
information found on the label on the Crib End bottom rail,
please reference the information found on the product
when contacting Delta Consumer Care.
Read all instructions before assembly and use.
KEEP INSTRUCTIONS FOR FUTURE USE.
ADULT ASSEMBLY REQUIRED
Due to the presence of small parts during assembly, keep out of
reach of children until assembly is complete.

2
ANY MATTRESS USED IN THIS CRIB MUST
BE AT LEAST 37 1/4 INCHES LONG BY 23 3/8
INCHES WIDE AND NOT MORE THAN 4
INCHES THICK.
CAUTION:
WARNING:
INFANTS CAN SUFFOCATE
*In gaps between a mattress too small or too thick and product sides.
*On soft bedding. Never add a mattress, pillow, comforter or padding.
Use only the mattress provided by Delta Children’s Products. (Which must be at least 37 1/4 inches
long by 23 3/8 inches wide and not more than 4 inches thick.)
Failure to follow these warnings and the instructions could result in serious injury or death.
To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their backs to sleep,
unless otherwise advised by your physician.
*STRINGS CAN CAUSE STRANGULATION! Never place items with a string around a child's neck,
such as hood strings or pacifier cords. Never suspend strings over product or attach strings to toys.
*The product, including side rails, must be fully erected prior to use.
*Never place product near a window where cords from blinds or drapes can strangle a child.
*When child is able to pull to a standing position, set mattress to lowest adjustment position and remove
bumper pads, large toys and other objects that could serve as steps for climbing out.
*Discontinue use of the product when child is able to climb out or reaches the height of 35 in. (890 mm).
*Never use this product if there are any loose or missing fasteners, loose joints or broken parts. Check
before assembly and frequently during use. Contact Delta Children’s Products for replacement parts.
Never substitute parts.
*Never use a water mattress with this product.
*If refinishing, use a non-toxic finish specified for children's products.
*Never use plastic shipping bags or other plastic film as mattress covers not sold and intended for that
purpose. They can cause suffocation.
*Ensure a safe environment for the child by checking regularly, before placing the child in the product,
that every component is properly and securely in place.
*To avoid head injury, do not allow any child to play underneath the product.
*Always provide the supervision necessary for the continued safety of your child. When used for
playing never leave child unattended.
*Child can become entrapped and die when improvised netting or covers are placed on top of product.
Never add such items to confine child in product.
*Never add an accessory such as a bassinet or changing table that extends over the sleeping
area.
*Replace Teething rail if damaged, cracked or loose.
WARNING:

3
A. Crib End with Product Label x 1
Part # 24307
Part # 24308 Part # 24541
Part # 24301
Part # 24303
Part # 22313
Part # 22314
B. Crib End no Product Label x 1
D. Mattress Support x 1
E. Left Mattress Support Bracket x 2
F. Right Mattress Support Bracket x 2
G. Mattress x 1
PARTS: MAKE SURE THAT ALL PRE-ASSEMBLED PARTS ARE TIGHT.
C. Stationary Side x 2
Product Label

4
PARTS:
M4 Allen Wrench Supplied x 2
HARDWARE KIT PART #24302-986 FOR COLOR 100 AND 108 OR #24302-987 FOR
COLOR 260 AND 235 OR #24302-988 FOR COLOR 207. SEE FRONT COVER.
H. 1/4” x 50 mm Bolt x 8
Part # 5768
J. 1/4” x 25 mm Barrel Nut x 8
Part # 5539
K. 1/4” x 18 mm Bolt x 8
Part # 5769
N. 2” Locking Caster x 2
Part # 5770
P. 2” Non-locking Caster x 2
Part # 5771
Part # 1177
L. 1/4” x 22 mm Bolt x 8
Part # 5538
M. 1/4” x 18 mm Cap Nut x 12
Part # 5540
No drills necessary.
Do not use power
screwdriver.
Flat Head Screwdriver
(not supplied)

5
Section 1: Crib Assembly
Step 1
Parts and tools required to complete step.
Attach (2) Left Mattress Support Brackets (Part E) to the Mattress Support (Part D) using (4) 1/4” x 22 mm
Bolts (Part L) and (4) 1/4” x 18 mm Cap Nuts (Part M). Tighten with two M4 Allen Wrenchs. Repeat on
the other (2) Right Mattress Support Brackets (Part F).
D
M4 Allen Wrench Supplied x 2
D. Mattress Support x 1
E. Left Mattress Support Bracket x 2
F. Right Mattress Support
Bracket x 2
L. 1/4” x 22 mm Bolt x 8
M. 1/4” x 18 mm Cap Nut x 8
E
E
F
F
E
L
L
L
D
M
M
M
M
M
L
L
L

6
M4 Allen Wrench
Supplied
Section 1: Crib Assembly
Step 2
Parts and tools required to complete step.
H. 1/4” x 50 mm Bolt x 4
J. 1/4” x 25 mm Barrel Nut x 4
A. Crib End with
Product Label x 1 B. Crib End no
Product Label x 1 C. Stationary Side x 1
J
H
J
H
J
A
B
C
J
H
Attach (1) Crib End with Product Label (Part A) and (1) Crib End no Product Label (Part B) to (1)
Stationary Side (Part C) using (4) 1/4” x 50mm Bolts (Part H) and (4) 1/4” x 25mm Barrel Nuts (Part J).
Tighten with the M4 Allen Wrench. Use the Flat Head Screwdriver to hold the Barrel Nut in the proper
alignment.
Product Label

7
M4 Allen Wrench Supplied
Section 1: Crib Assembly
Step 3
Parts and tools required to complete step.
From Step 2
From Step 1
ALL CORNERS
K. 1/4” x 18 mm Bolt x 4
Attach the assembly from step 1 to the assembly from step 2 using (4) 1/4”x18mm Bolts (Part K),
Tighten with the M4 Allen Wrench.
There are (3) positions for the Mattress support. Use the highest only for new borns. Move the
Mattress down as the child grows.
D
K

8
From Step 3
Section 1: Crib Assembly
Step 4
Parts and tools required to complete step.
Attach (1) Stationary Side (Part C) to the assembly from step 3 using (4) 1/4” x 50mm Bolts (Part H)
and (4) 1/4” x 25mm Barrel Nuts (Part J). Tighten with the M4 Allen Wrench. Use the Flat Head
Screwdriver to hold the Barrel Nut in the proper alignment.
M4 Allen Wrench
Supplied
H. 1/4” x 50 mm Bolt x 4
J. 1/4” x 25 mm Barrel Nut x 4
C. Stationary Side x 1
J
H
J
H
J
C
J
H
H

N9
From Step 4
Section 1: Crib Assembly
Step 5
Parts and tools required to complete step.
N. 2” Locking Caster x 2
P. 2” Non-locking Caster x 2
Attach (2) 2” Non-locking Casters (Part P) to the Back Legs of the Crib using (2) 1/4” x 18 mm Bolts
(Part K) and (2) 1/4” x 18 mm Cap Nuts (Part M). Tighten with two M4 Allen Wrenchs. Attach (2) 2”
Locking Casters (Part N) to the Front Legs using (2) 1/4” x 18 mm Bolts (Part K) and (2) 1/4” x 18 mm
Cap Nuts (Part M). Tighten with two M4 Allen Wrenchs.
FRONT
Locking
Mechanism
IMPORTANT: MAKE SURE TO PUT
THE LOCKING CASTERS ON THE
FRONT OF THE CRIB.
K. 1/4” x 18 mm Bolt x 4
M. 1/4” x 18 mm Cap Nut x 4
M4 Allen Wrench
Supplied x 2
M
K
N
M
K
K
P
M
K
N
M

10
Assembly Instruction
Booklet
WARNING: SEE PAGE 2 FOR INFORMATION
Store the assembly instruction booklet in the pouch attached to the mattress support. Store all parts
and tools separately, in a safe place.
Step 6
Section 1: Crib Assembly
Parts and tools required to complete step.
AI BAG
JUNE 24, 2013, 24309 , R0
Style #:
Lot:
Date:
___________
___________
___________
©2013 DELTAENTERPRISE CORP.
A
Cozy Crib
Conforms to
ASTMF406
SafetyStandards
Consumer Care:
www.DeltaChildren.com
Delta Children’s Products
114 West 26th Street
New York, NY 10001
Tele.212-645-9033
FACTORYREV
THIS PRODUCT IS NOT INTENDED FOR INSTITUTIONAL OR COMMERCIAL USE.
To register your product for important safety alerts and updates to your product please
visit www.DeltaChildren.com and click on Product Registration.
When contacting Delta Consumer Care please reference
the above information. Before contacting Delta Consumer
Care please ensure that the information above matches the
information found on the label on the Crib End bottom rail,
please reference the information found on the product
when contacting Delta Consumer Care.
Read all instructions before assembly and use.
KEEP INSTRUCTIONS FOR FUTURE USE.
ADULT ASSEMBLY REQUIRED
Due to the presence of small parts during assembly, keep out of
reach of children until assembly is complete.
JUNE24, 2013, 24309 , R0
Style #:
Lot:
Date:
___________
___________
___________
©2013DELTA ENTERPRISE CORP.
A
Cozy Crib
Conformsto
ASTMF406
SafetyStandards
Consumer Care:
www.DeltaChildren.com
Delta Children’s Products
114 West 26th Street
New York, NY 10001
Tele.212-645-9033
FACTORYREV
THIS PRODUCT IS NOT INTENDED FOR INSTITUTIONAL OR COMMERCIAL USE.
To register your product for important safety alerts and updates to your product please
visit www.DeltaChildren.com and click on Product Registration.
When contacting Delta Consumer Care please reference
the above information. Before contacting Delta Consumer
Care please ensure that the information above matches the
information found on the label on the Crib End bottom rail,
please reference the information found on the product
when contacting Delta Consumer Care.
Read all instructions before assembly and use.
KEEP INSTRUCTIONS FOR FUTURE USE.
ADULT ASSEMBLY REQUIRED
Dueto the presence of small parts during assembly, keep out of
reachof children until assembly is complete.

G. Mattress x 1
G
11
From Step 6
Section 1: Crib Assembly
Step 7
Parts and tools required to complete step.
Place the Mattress (Part G) onto the Mattress Support (Part D) as shown.

Warranty: This Delta Crib is warranted to be free from defects for a period
of 1 year from the date of purchase under normal use. This warranty extends
only to the original retail purchaser and is valid only when supplied with proof of
purchase, or if received as a gift, when the registration is on file with Delta.
Consumer Care:
www.DeltaChildren.com
Delta Children’s Products
114 West 26th Street
New York, NY 10001
Tele.212-645-9033
Please do not return this item to the store before contacting
us about missing parts or with any questions.
To register your product for important safety alerts and updates to
your product please visit www.DeltaChildren.com
To report a problem, please log on to www.DeltaChildren.com and
click the Consumer Care Tab, or contact us by phone at
[phone].
In the event that you need to contact our customer service
department please have the Style Number and Lot Number available.
Use the space below to make note of those numbers. They can be
found on the label on the Crib End bottom rail.
Lot No. : _______________________
Pack Date:_____________________
Date of Purchase: _____________ (you should also keep your receipt)
COLOR FTY
REV
STYLE No: 4430 A