Delta 2583-LHP User manual

C
CO OM MP PL LI IE ES S W WI IT TH H: :
• ASME A112.18.1 / CSA B125.1
• ASME A112.18.2 / CSA B125.2
Indic tes compli nce to
ICC/ANSI A117.1
• EPA W ter Sense
LAVATORY
FAUCETS
■C-Spout Series
■Two Handle Deck Mount
■3 Hole Sink Applications
■4" Centerset
Submitted Model No.: _______________________________________________
Specific Features: __________________________________________________ STANDARD SPECIFICATIONS:
• Solid br ss f bric ted body.
• 4" (102 mm) centerset.
• 5" (127 mm) long, 4 7/8" (124 mm) high
rigid spout.
• LHP - Less H ndle Progr m. See h ndle options below.
• 1/4 turn h ndle stops.
• Hot nd cold stems re interch nge ble.
• Br ss stems with 1/4 turn h ndle stops.
• Control mech nism is the rot ting cylinder type
with st inless steel pl te nd 180° rot tion, with
repl ce ble non-met llic se ts oper ting in
st inless steel lined sockets.
• 1/2"-14 NPSM thre ded m le inlet sh nks.
• Models h ve met l dr in with pop-up type fitting
with pl ted fl nge nd stopper.
• M ximum flow r te 1.5 gpm @ 60 PSI.
2583-LHP
DSP-L-2583-LHP Rev. B
CA2583-LHP
4" Centers
(102 mm)
2 3/8"
(60 mm)
1 15/16"
(49 mm)
1 3/8" (35 mm)
M x. Deck
Thickness
0
1
2
3
4
5
0 10 20 30 40 50 60 70 80 90
Pressure (PSI)
Flow (U.S. Gallons Per Minute)
6
0 69 138 207 276 345 414 483 552 621
0
3.8
7.6
11.4
15.1
18.9
22.7
Pressure (kPa)
Flow (Liters Per Minute)
H26▲
H27▲
H24▲A24 H25▲
1 1/4"
(32 mm)
1 1/4"
(32 mm)
2 1/2"
(64 mm)
3 1/4"
(83 mm)
1/2"-14 NPSM 1 5/8"
(42 mm)
to
2 3/8"
(61 mm)
2 1/8"
(54 mm)
Di .
3 3/8"
(86 mm)
1 3/8"
(35 mm)
Di .
4 5/8"
(118 mm)
1 1/4" (32 mm) Di .
®
®
UPC
A24, A24PB,
A24WH
A ailable LHP Handle
Accent Options with
Matching Lift Rod Knobs
Delt reserves the right (1) to m ke ch nges in specific tions nd m teri ls, nd (2) to ch nge or discontinue
models, both without notice or oblig tion. Dimensions re for reference only. See current full-line price book or
www.specselect.com for finish options nd product v il bility.
H212▲
3"
(76 mm)
5"
(127 mm)
2 1/4"
(57 mm) 6 1/4"
(159 mm)
4 7/8"
(124 mm)
55 E. 111th Street, Ind anapol s, Ind ana 46280
395 Matheson Blvd. E., M ss ssauga, ON L4Z 2H2
© 2008 Masco Corporat on of Ind ana
1.D.20
H215▲
2 5/16"
(59 mm)
WARRANTY
• Lifetime F ucet nd Finish Limited W rr nty to the
origin l consumer purch ser to be free from
defects in m teri l nd workm nship.
• 5 Ye r Limited W rr nty for us ge in ll industri l,
commerci l nd business pplic tions.
A ailable LHP Handle Options ▲Designate proper finish suffix