Delta PTZ-660EF User manual

USER MANUAL
Outdoor PTZ camera
PTZ-660EF

Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate
collection systems)
This marking on the product, accessories or literature indicates that the product
and its electronic accessories (e.g. charger, headset, USB cable) should not be
disposed o with other household waste at the end o their working li e. To prevent
possible harm to the environment or human health rom uncontrolled waste
disposal, please separate these items rom other types o waste and recycle them
responsibly to promote the sustainable reuse o material resources.
Household users should contact either the retailer where they purchased this
product, or their local government o ice, or details o where and how they can
take these items or environmentally sa e recycling.
Business users should contact their supplier and check the terms and conditions
o the purchase contract.
This product and its electronic accessories should not be mixed with other
commercial wastes or disposal.

1. Camera connections
Camera has three cables outside:
1) RS-4 5 communication:
●violet (red): RS485 +
●gra (black): RS485 -
2) Video signal
●BNC socket: video composite signal
3) Power supply
●2.1/5.5mm socket: DC12V / 700mA
2. RS-4 5 port configuration
The PTZ camera functions are controlled b RS-485 port. The port parameters can be set
using DIP-Switches or via RS-485 interface.
To set the switches positions, ou have to remove the camera dome cover (unscrew 4
screws), and next remove the plastic protection (4 screws).
2.1 DIP-switches configuration
Device address setting:
The device address can be set in range: 1 – 63 (for PELCO-P: 0 – 63).
To enter the proper address ou should use the DIP1 – 6 switches and set the right combination
according to below picture. The device address is the sum of the numbers from corresponding
switches, which were set to ON position.
The ON/OFF switches and corresponding numbers:

Transmision baudrate settings:
●1200 b/s DIP7 = ON, DIP8 = OFF
●2400 b/s DIP7 = OFF, DIP8 = OFF
●4800 b/s DIP7 = ON, DIP8 = ON
●9600 b/s DIP7 = OFF, DIP8 = ON
Protocol settings:
●PELCO-P DIP9 = ON
●PELCO-D DIP9 = OFF
3. PTZ functions
Camera functions can be called b CLEAR / SET / GOTO preset commands. Available functions are
listed in the below table:
3.1 SET (set preset)
Preset No.: Function
1 ... 32 Set preset point
3.2 CLE R (clear preset)
Preset No.: Function
1 ... 32 Clear preset point
3.3 GOTO (go to preset)
Preset No.: Function
1 ... 32 Goto preset point
Example: 2+4+16 = 22. Address is
22.

4. Camera menu functions
To enter to the camera menu press the OPEN or CLOSE ke on the ke board.
4.1 Main Menu
1. SHUTTER/AGC << Shutter settings
2. WHITE BAL << White Balance
3. BACKLIGHT << BackLight Compensation (BLC, HLC)
4. PICT ADJUST << Image adjustment
5. ATR << Wide D namic Range
6. MOTION DET << Motion Detection
7. PRIVACY << NOT ACTIVE OPTION!
8. DAY/NIGHT << Da / Night mode
9. NR << Noise reduction
10. CAMERA ID << Camera name
11. SYNC << S nchronization
12. LANGUAGE << OSD menu language (English, German, Chinese, French,
Russian, Portuguese, Spanish )
13. CAMERA RESET << Default settings
SAVE << Save settings
EXIT << Menu exit

5. Technical specification
Sensor 1/4" SONY ExView HAD CCD II
Digital Signal Processor (DSP) SONY Effio
Resolution Color: 650 TVL, B/W: 700 TVL
Lens 5 - 60 mm
View angle Manufacturer data: 51° - 4.5°
Min. illumination 0.001 Lux
Video output 1 Vpp / 75 Ω
Electronic shutter 1/50 s - 1/100000 s
Camera functions
AGC – Auto Gain Control
ATW – Auto White Balance
BLC – Back Light Compensation (configurable)
HLC – High Light Compensation
ATR (WDR) – Wide D namic Range
NR (DNR) – Digital Noise Reduction
Max. rotation speed Vertical: 12 °/s
Horizontal: 36 °/s
Rotation angles Horizontal: 360° (continuous)
Vertical: 0° - 90°
PTZ control via RS-485 interface
Protocol Pelco-D, Pelco-P
Baudrates: 1200, 2400, 4800, 9600 kbit/s
Operation temperature from -10°C to +50°C
Weight (with bracket) 1.28 kg
Dimensions (without bracket) Ø123 x 142 mm
Power suppl DC 12V / 700mA
OSD languages supported English, German, Chinese, French, Russian, Portuguese,
Spanish
Camera connectors
Video: BNC socket,
Power suppl : 2.1/5.5mm socket,
RS-485: pair of wires