Deltec E-BOX User manual

®
E-BOX

DELTEC E-BOX
The E-Box features the following
E-Boxfunctions
- feed timer - selection of pump type
- interval mode - language
- random mode - display brightness
- remote control
Pump
connection 
Aquarium
computer 
Power
adapter 
It comes with a power adapter and a connecting cable
(2 m) to the pump’s controller

Installation
The E-Box can be simply pushed onto the E – Flow
pump controller housing or it can be fixed with 2 crews
on a suitable surface.
Important
The E-Box must be installed in a dry, well ventilated
space
Connecting the E-Box
Plug the power adapter into a suitable mains socket;
connect the pump’s controller and the
E-Box with the cable supplied
Programming the E-Box
The E-Box features a push/turn control knob to select
and program the function
- symbol turn clockwise
- symbol turn anti clockwise
- symbol turn either way
a. it selects the functions
b. it changes the setting
- symbol push
a. changes from one setting to the next
b. confirms the set values

To select a function :
To change a setting :
Select the E-Flow pump type
The E-Box can be used for every E-Flow pump type.
Before attempting to program any functions, the pump
type must be selected
to do so :
select and change language
to do so:
select and change display brightness
to do so:
Feedtimer
The feed timer can be programmed to either stop the
pump or reduce performance from 20-50 Watts during a
time span from 1 to 30 minutes.

Feed timer, to select and change settings
to do so :
F-Timer FT-Time FT-Power
To activate the feed timer during normal operation
simply press the control knob for app 3 seconds
Interval mode
With the interval mode you can select a fixed cycle of 2
time and 2 power settings. Time span min 5 seconds,
max 20 minutes. Power from 20 Watts to maximum
Interval mode, to select and change settings
to do so :
Interval Time 1 Time 2 Power 1 Power 2
Random mode
This is basically a type of interval function, however,
time span and power are selected it random.
As a special feature, the min/max time and power
settings can be programmed.
Random mode, to select and change settings
To do so:
Zufall Min Z.1 Max Z.1 Min Z.2 Max Z.2

Min P.1 Max P.1 Min P.2 Max P.2
Remote control
This function enables you to place the E-Box a distance
from the pump’s main controller. This would apply if
the pump is fitted in a separate room or basement. By
using an optional extension cable (up to 7 m) between
the pump’s main controller and the E – box, the pump’s
performance can be controlled from a convenient place.
This does of course includes the feed timer.
Remote control, how to select
To do so:
Please note
the E-Box features also a socket 1-10V. With a suitable
connecting cable the E-Flow pumps can also be
programmed and controlled using an aquarium
computer.

Deltec GmbH 2012