Demonic Machines Alleborith Distortion User manual

Alleborith
distortion
MANUALMANUAL

Named in the Testament of Solo-
mon, Alleborith was one of the
seventy-two Spirits of Solomon.
He is known for making people
choke and swallow fish bones.
This pedal has nothing to do
with that other than the graph-
ic. We just thought the graphic
was cool. This is a RAT-style cir-
cuit with a Tilt EQ and select-
able/bypassable clipping diodes.
CONTROLS
• Level controls the volume.
• Gain controls the amount of
distortion.
• Filter rolls off mids and highs
as you turn it up.
• Tilter controls which
frequencies are peaked/
scooped.
• The CLIPPING switch toggles
between LED, Ge+MOSFET, and
Silicone clipping.

SWITCHING
This pedal features DPDT true relay
bypass switching.
POWER REQUIREMENTS
This machine takes a standard 9 volt DC
power supply with a 2.1mm negative center
barrel. We always recommend pedal-
specific, transformer-isolated wall-wart
power
supplies or multiple isolated-output
supplies. Pedals will make extra noise
if there is ripple or unclean power.
Switching-type power supplies, daisy
chains and nonpedal specific power
supplies do not filter dirty power as well
and let through unwanted noise. DO NOT
RUN AT HIGHER VOLTAGES!
Current draw: ~55ma
Input Impedance: 1MOhms
Output Impedance: <1KOhm
WARRANTY
This machine has a limited lifetime
warranty. If it breaks, we will fix it.
Should you encounter any issues, please
email [e-mail]

CHECK US
OUT ONLINE!
https://demonicmachines.com/
Tone is in the signal.