
SWITCHING
This pedal features DPDT relay true by-
pass.
POWER REQUIREMENTS
This machine takes a standard 9 volt DC
power supply with a 2.1mm negative center
barrel. We always recommend pedal-specif-
ic, transformer-isolated wall-wart power
supplies or multiple isolated-output supplies.
Pedals will make extra noise if there is rip-
ple or unclean power. Switching-type power
supplies, daisy chains and nonpedal specific
power supplies do not filter dirty power as
well and let through unwanted noise. DO
NOT RUN AT HIGHER VOLTAGES!
Current draw: ~54mA
WARRANTY
This machine has a limited lifetime warran-
ty. If it breaks, we will fix it. Should you
encounter any issues, please email info@de-
monicmachines.com