
SWITCHING
This pedal features 3PDT true mechanical
bypass switching.
POWER REQUIREMENTS
This machine takes a standard 9 volt DC power
supply with a 2.1mm negative center barrel. We
always recommend pedal-specific, transformer-
isolated wall-wart power
supplies or multiple isolated-output supplies.
Pedals will make extra noise if there is ripple
or unclean power. Switching-type power
supplies, daisy chains and nonpedal specific
power supplies do not filter dirty power as well
and let through unwanted noise. DO NOT RUN
AT HIGHER VOLTAGES!
Current draw: 3ma
Input Impedance: ~5M (w/ boost)/~100kOhm
Output Impedance: <1kOhm
WARRANTY
This machine has a limited lifetime warranty.
If it breaks, we will fix it. Should you encounter
any issues, please email info@demonicmachines.
com