DENALI AIRE 1DAFCR20 User manual

20" AIR CIRCULATOR
MODEL 1DAFCR20
OWNER’S MANUAL

2
SAFETY & PRECAUTIONS
SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
CAUTION
Read Rules for Safe Operation and Instructions Carefully.
WARNING
1. Toreducetheriskofreorelectricalshock,donotusethis
fan with any solid state speed control device.
2. Ifthepowercordisdamaged,itisstronglyrecommendedto
request a specialist to handle.
3. This appliance has a polarized plug (one blade is wider than
theother).Toreducetheriskofelectricshock,thisplugis
intendedtotinapolarizedoutletonlyoneway.Iftheplug
doesnottfullyintheoutlet,reversetheplug.Ifitstilldoes
nott,contactaqualiedelectrician.Donotattemptto
defeat this safety feature.
4. Do not leave the fan running unattended.
RULES FOR SAFE OPERATION
1. Neverinsertngers,pencils,oranyotherobjectsthrough
the grille when fan is running.
2. Disconnect fan when moving from one location to another.
3. Disconnect fan when moving grilles for cleaning.
4. Be sure fan is on a stable surface when operating to avoid
overturning.
5. DO NOT use fan in window. Rain may create electrical hazard.

3
(Continued)
SAFETY INSTRUCTIONS
6. The rules about cord and plug as below:
(1) This product employs overload protection (fuse). A blown
fuse indicates an overload or short-circuit situation. If the
fuseblows,unplugtheproductfromtheoutlet.Replace
the fuse as per the user servicing instructions (follow
product marking for proper fuse rating) and check the
products.Ifthereplacementfuseblows,ashort-circuit
may be present and the product should be discarded or
returned to an authorized service facility for examination
and/ or repair.
(2) Do not operate any fan with a damaged cord or plug.
Discard fan or return to an authorized service facility for
examination and/or repair.
(3) Do not run cord under carpeting. Do not cover cord with
throwrugs,runners,orsimilarcoverings.Donotroute
cord under furniture or appliance.

4
SAFETY & PRECAUTIONS
Vertical Tilt
Push the guard slightly to adjust
a comfortable position.
Warning:
When adjusting the angle, do
not put your hands in the grille
to avoid get injured.
Wall-mounted
Fix the base on the wall to adjust a comfortable position. When the fan is installed on the
wall, the power cord must be located between the fan head and the fan base.
Warning:
When adjusting the angle and start using , make sure the fan is xed on the wall.
INSTALLATION
INSTALLATION INSTRUCTIONS
Name of components
Screw mounting distance
3in 16in 3in
NOTE: DENALI AIRE WILL NOT ACCEPT LIABILITY/LOSS FOR ANY
DAMAGE CAUSED BY THE UNIT FALLING OR DROPPING.

5
(Continued)
INSTALLATION
USER SERVICING INSTRUCTIONS
1. Grasp plug and remove from the receptacle
or other outlet device. Do not unplug by
pulling on cord.
2. Open fuse cover. Slide the fuse cover on top of the
attachment plug towards the blades.
3. Remove fuse carefully. Insert the tip of your tool into the fuse
slot(closewiththeterminal),thenprythefuseoutslowly,
butnotforcefully.Ifitfeelstight,youcantryseveraltimesto
pry the fuse out little by little. When one side of the fuse has
beenpry,thenyoucangetthefuseoutentirely.
4. Riskofre.Replacefuseonlywith2.5Amp,125Voltfuse.
5. Close fuse cover. Slide the fuse access cover on top of the
attachment plug closed.
6. Riskofre.Donotreplaceattachmentplug,asthuscontains
a safety device (fuse) that should not be removed. Discard
the product if the attachment plug is damaged.
NOTICE: When you replace the fuse, please don’t operate suddenly
or overexert, or else the product will be damaged or cause an accident.
If it feels hard to replace the fuse, please make sure you have it inserted
the right way.

6
SAFETY & PRECAUTIONS
MAINTENANCE
Machines being used in areas with high particle pollution will
need to be more frequently cleaned.
CARE & MAINTENANCE
1. Be sure to unplug from the electrical supply before cleaning.
2. Toensureadequateaircirculationtothefanmotor,keepthe
ventsattherearofthemotorhousingfreeofdust,debris,
and etc. You can use a vacuum cleaner to clean these vents
after the unit has been disconnected from the outlet. Do not
disassemble the motor housing to clean.
3. Plastic parts should be cleaned with mild soap and a damp
clothorsponge.Thoroughlyremovesoaplmwithclean
water. Do not use any abrasive detergent or solvents to avoid
scratching the surface. Do not use the following cleaner:
gasoline,thinner,bending.
4. Be sure to not get water or other liquids inside of the
motor housing.
5. Be sure to let the unit fully dry before resuming operation.

Foryourrecords,stapleyoursalesreceipt
to this manual and record the following:
Date of Purchase: ____________________________________
Place of Purchase: ___________________________________
NOTE: Proof of purchase is required for all warranty claims.
NOTE:Asaresultofcontinualimprovements,thedesignand
specicationsoftheproductwithinmaydierslightlytothe
unit illustrated on the packaging.

Printed in China |0922_M1037
888-433-6254|[e-mail] |www.denali-aire.com
5401DansherRoad
Countryside,IL60525
THANK YOU FOR YOUR PURCHASE!
As a small business, reviews are everything!
We’dlovetohearhowyouareenjoyingyourDenaliAireproduct!
Please take a minute to tell us (and others) about your experience.
Thanks (again!)
SCAN CODE TO
LEAVE A REVIEW