DENALI AIRE FGD-20 User manual

Model : FGD-20
Instruction Manual
Read this Instruction Manual carefully before assembling or operating
the appliance and keep it for future reference.
1. SAFETY WARNING
Read this Instruction Manual carefully before assembling or
operating the appliance and keep it for future reference.
When using electrical appliances, basic precautions should always
be followed to reduce the risk of fire, electric shock and injury to
persons, including the following:

1. To reduce the risk of electric shock, do not immerse or expose
this appliance or flexible cord to rain, moisture or any other
liquid.
2. Dangerous high voltages are present inside this enclosure. To
avoid electric shock, do not open the cabinet, refer servicing to
qualified personnel only.
3. Make sure the fan is not placed near drapes,curtains, or any
objects that may be drawn into the fan. Never place or operate
the unit where it could be subject to:
•Heat sources such as radiators, heat registers, stoves or other
products that produce heat
•Direct sunlight
•Excessive dust
•Mechanical vibration or shock
•Lack of ventilation
•Uneven surfaces
4. The apparatus shall not be exposed to dripping or splashing and
no objects filled with liquids, such as vases, shall be placed on
the product.
5. Ventilation should not be impeded by covering the ventilation
openings. Slots and opening are provided for ventilation to
ensure reliable operation of the product and to protect it from
overheating. Do not use with any opening blocked, keep free of
dust, lint, hair and anything that might reduce airflow.
6. Place the fan on a stable level, dry surface when operating to
avoid overturning.
7. Only connect to a suitable AC 120V~60Hz earthed mains
socket.
8. Do not operate fan in the presence of explosive and/or
flammable fumes. Do not place the fan near an open flame,
cooking or other heating appliance.
9. Do not operate the fan with a damaged cord or plug, after a
malfunction or if dropped or damaged in any manner.
10. Do not operate without the fan grills properly in place. Do not
use if grill becomes damaged or loose.
11. Do not place the fan close to an open window. Rain splashing
on the fan could cause an electric shock hazard.

12. Do not let the power cord hang over the edge of a table or
counter or let it touch any hot surfaces.
13. Do not insert fingers or allow foreign objects to enter the grill
openings as this may cause injury or damage to the appliance.
14. This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance
by a person responsible for their safety.
15. WARNING: Children should be supervised to ensure that they
do not play with the appliance.
16. Turn the fan OFF and unplug it from the outlet when not in use,
when moving fan from one location to another and before
cleaning.
17. To disconnect, grip the plug and pull it from the wall outlet.
Never pull by the cord.
18. Switch off and unplug from wall outlet when not in use, before
assembling or disassembling parts; and before cleaning. To
avoid a tripping hazard, safely coil the cable.
19. Do not place this appliance on any flooring that may be marked
or damaged by vibration of appliances.
20. If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in
order to avoid a hazard. Do not attempt to repair, disassemble or
modify the appliance by yourself. There are no user-serviceable
parts inside.
2. DESCRIPTION OF PARTS

1. Safety Screw 2. Front Grill
3. Rear Grill 4. Handle
5. Switch Box 6. Motor
7. Blade 8. Metal Tube
9. Metal Base
Remove all packing material and accessories. Make sure all the
accessories are included, if any item is damaged or missing, contact
your dealer.

ASSEMBLY OF METAL BASE
Ensure the Fan is unplugged from the power supply and turned off
before commencing assembly.

1. Secure the motor to the rear mesh housing
2. Fix the screws, shock pad and short arm on both sides of the rear m
esh cover.
3. Fix the fan blade on the motor shaft.
4. Fix the front and rear mesh cover with screws.
5. Insert the metal tube into the short arm.
6. Fix the wall bracket to the wall by expansion screw.
7. Hang the fan's metal tube on the bracket and fix it with screws.
2. 3. OPERATION
1. Place your fan on a level and dry surface.
2. Plug the fan in to a suitable mains socket. Select the desired speed
setting by turning the Speed Control Knob. There are 4 settings –
0 (off), 1 (low), 2 (medium) and 3 (high).
3. To adjust the tilt angle of fan head by pushing the guard gently.
Caution: The fan should always be switched off when making
this adjustment.
4. Turn the Speed Control Knob to “0” and unplug the fan after use.
Warning: Never touch the blade with hand or any other objects
when the fan is operating.
4. CARE AND CLEANING
Always disconnect the fan from mains socket before cleaning.
Avoid contact with moving fan parts.
Use only a soft damp cloth to clean the fan.
DO NOT immerse the fan in water and never allow water to drip
into the Motor Housing.
Never spray the appliance with liquids or submerge it in water or
other liquid.
DO NOT use gasoline, paint thinner or other chemicals to clean the
fan.
Ensure that the fan is switched off from the supply mains before
removing the grill.

Clean the fan blade and grills with a soft damp cloth.
CAUTION: The Fan Blade may have sharp edges. Handle with
extreme care.
Store the fan in its original box or cover the fan to protect it from
dust in a dry place if it will not be used for a long period of time.
5. SPECIFICATION
Power Supply………………………………...AC 120V ~ 60Hz
Power Consumption…………………………120W
Operation Temperature………………………32°F-104°F（5-40°C ）
NOTE: As a result of continual improvements, the design and specifications
of the product within may differ slightly to the unit illustrated on the packaging.