Deni 5530 Owner's manual

Model 5530
IMPORTANT
Please keep these instructions
and your original box
packaging INSTRUCTIONS
FOR PROPER USE AND CARE
BONUS
Includes
Recipes
®
®
Ice Cream Maker
SSoofftt SSeerrvvee

1
NOT BE USED ON THE INSIDE OF THE CANISTER. They can
scratch or damage it Rubber or wooden utensils may be
used when the ice cream maker is off
■Do not clean with metal scrubbing pads Pieces can break
off the pad and short-circuit electrical parts, creating a possi-
bility of an electrical shock
■To protect against electrical shock, do not rinse or immerse
plug, cord or motor top in water or any other liquid
■Do not use an extension cord with this ice cream maker
However, if one is used, it must have a rating equal to or
exceeding the rating of this appliance
■The ice cream maker should always be in the off position
before inserting or removing plug from a wall outlet
■Do not leave unattended while the unit is on
■Do not use ice cream maker with wet or moist hands
■This ice cream maker is for household use only
■This ice cream maker should not be used for other than the
intended use
■The Deni Soft Serve Ice Cream Maker has a polarized plug
(one blade is wider than the other) This plug will fit in a
polarized outlet only one way, as a safety feature Reverse
the plug if the plug does not fit fully in the outlet Contact a
qualified electrician if it still does not fit Do not attempt to
defeat this safety feature
SAVE THESE INSTRUCTIONS
IMPORTANT SAFEGUARDS
When using this electrical appliance, sa ety precautions
should always be observed, including the ollowing:
■Read all o the instructions.
■Do not let the cord hang over the edge of the work
space or touch any hot surfaces
■Place the ice cream maker securely in the center of
the counter or work space
■Close adult supervision must be provided when this
appliance is used by or near children
■Avoid any contact with moving parts Fingers, hair,
clothing, etc should be kept away during operation
■Using attachments not recommended or sold by
Keystone Manufacturing Co , Inc may cause hazards
■Do not operate with a damaged cord, plug, after the
appliance malfunctions, or if it is dropped or damaged
in any manner Return the ice cream maker to
Keystone Manufacturing Co , Inc for examination,
repair or electrical or mechanical adjustment
■Always unplug before cleaning and removing parts
■For indoor use only
■Do not place near hot gas or electric burner
■Keep utensils out of the canister while in use to reduce
the risk of harm to persons or to the ice cream maker
SHARP OR METAL UTENSILS OR OBJECTS SHOULD

2
®
FEATURES
®
STIR PADDLE
CLEAR-VUE™ LID
WITH E-Z ADD™
OPENING
SPEEDEE FREEZE®
CANISTER
MOTOR
SOFT SERVE
SPOUT 2 PIECE BODY BASE
Your new Deni Soft Serve Ice Cream Maker allows you to create a
variety of frozen treats: several ice cream flavors, sorbets, sherbet,
frozen yogurt, margaritas, even your favorite frozen drink in less
than 10-20 minutes! The following features come with your Deni
Soft Serve Ice Cream Maker:
■Motor Top with on/o switch
Compact 16 watt motor is easy to operate
■Clear-Vue™ Lid
Easily add ingredients by pouring them through the opening
of the lid without turning the machine off
■Speedee Freeze®Double Insulated Canister
The double liquid filled walls keep the cylinder bowl cold
longer, for best freezing results
■Stir Paddle
Turns ingredients into ice cream
■So t Serve Spout
Push down when ready to dispense for ice cream cones and
sundaes
■Body
Sturdy base provides room for large sundae bowls
®
BODY
BASE

3
Before First Use
1 Remove all packing materials and literature from inside the ice
cream maker
2 Wash the Speedee Freeze canister, Clear-Vue lid, body base
and stir paddle in warm soapy water Rinse and dry all parts
thoroughly NEVER immerse motor in water
Freezing the Spee ee Freeze®
Canister
■Before making frozen desserts, it is very important that the
Speedee Freeze canister be properly frozen The Deni Soft
Serve Ice Cream Maker features a double insulated bowl that
requires thorough freezing We recommend placing the
Speedee Freeze canister upright in the back of your freezer
where the temperature is the coldest
■Make sure the Speedee Freeze canister is washed and thorough-
ly dried For best results, wrap canister in a plastic bag
■The length of time necessary to properly freeze the canister
depends on the temperature in your freezer Freezing time can
vary from 8 –24 hours, depending on freezer temperatures
ranging from -30°C/-22°F to -10°C/+3°F
■Shake the Speedee Freeze canister to ensure a properly frozen
bowl The canister should have no liquid moving inside If you
hear liquid, it is not frozen
■Keep your Speedee Freeze canister in the freezer when not in
use so you can create frozen desserts anytime
HOW TO OPERATE
1 Place the canister in the freezer overnight, (see Freezing the
Speedee Freeze®canister)
2 Follow the recipes in our instruction booklet Almost any frozen
dessert recipe can be used providing it does not make more
than 1 quart Note: Do not use hard ingredients or candies,
they will not pass through the soft serve spout!!!!!!
3 Prepare the ingredients Note: For best results, leave the mix-
ture in the refrigerator for at least 4 hours until chilled
4 Attach the motor on top of the clear vue lid
5 Take the canister out of freezer and place into body The can-
ister should be used immediately a ter removal rom reezer
because it will begin to thaw.
6 Place the stir paddle into the opening in the motor Place the
spiral-shaped piece of the paddle into the bottom hole of the
canister
7 Lock the Clear-Vue™ lid onto the body Lock the lid using the
“lock” and “unlock” labels on the top of the body
8 Place the soft serve spout into the bottom of the body Place the
handle to the left side and twist counter clockwise The soft
serve spout handle should always be up, until you are ready yo
dispense
9 Plug the unit in
10 Press the ON button It is very important to turn the unit on
irst be ore pouring the mixture in. The paddle will move

4
®
while the canister remains stationary.
11 Immediately pour the chilled mixture in the top opening of
the Clear-Vue lid to begin the freezing process
12 Leave the machine on for about 10-20 minutes until mixture
becomes the desired thickness Your result should be a soft
ice cream that can be dispensed into a cone (or bowl) using
the soft serve spout
14 To serve: place a cone or bowl under the soft serve spout
Push down on the soft serve spout handle to distribute the ice
cream Pull the handle back up when you reach the desired
amount of ice cream Turn the unit off when complete Any
remaining amount of ice cream you do not wish to eat at
that time should be placed in a freezer-safe airtight
container Do not use metal utensils or objects in the
Speedee Freeze Canister Do not leave the ice cream in the
Speedee Freeze Canister for any great period of time (more
than 30 minutes) or it will freeze to the sides
NOTE: The so t serve spout is not intended or rozen desserts
with nuts, candies, or other hard ingredients , these ingre-
dients will not pass through the so t serve spout, risking
damage and/or ailure to ice cream making.
TO DISASSEMBLE UNIT:
1 Make sure the switch at the top of the motor top is in the
“OFF” position
2 Unplug the unit
3 Turn the motor and lid to the unlock position and lift motor
and lid off the body
4 Lift the paddle out of the canister
5 To remove the clear-vue lid from the motor, face the motor
upright Place both thumbs on the spot marked “ latches”
scoop your hands beneath the motor Applying gentle pres-
sure on the latches, gently lift the motor from the lid
6 Do NOT immerse the motor in water Contact with water, can
result in damage and/or failure of the motor The motor can
be wiped with a damp cloth
7 Remove all ice cream from the canister before removing the
soft serve spout To remove the soft serve spout turn clock-
wise
8 Lift the canister to clean Do NOT use metal utensils or objects
in the Speedee Freeze canister
9 Do NOT place any parts in the dishwasher Instead, wash
with warm water and a mild soap Do NOT use abrasive
detergents or metal objects to clean the parts of the ice cream
maker