Denver LDD-3273 User manual

HD LED TV with DVB-T2/S2/DVB-C
and H.265/HEVC Support
Model: 3723-DDL
User’s Guide
NOTE:
Read all of the instructions before using this TV and keep the instruction
manual in a safe place for future reference.

Contents
Select Input Source 8
First Time Installation 9-10
Main Menu Operation 11-13
1.Picture menu 14-15
OSD MENU 14-25
2.Sound menu 16
3.Time menu 17-18
4.Lock menu 19-21
5.Setup menu 22-25
Media Operation 26-30
DVD Operation 31
6.Screen menu 26

1

2

3
Due to the manufacturing process of components, televisions and other electronic products
can have parts that may produce a smell after the product is first turned on and warms up.
The smell will usually dissipate within a few days of use and does not return.
This is normal and occurs with many electronic products. Please ensure there is sufficient
ventilation around the TV and in the room and the odor will dissipate.

4
DVD
POWER/STANDBY:
INPUT/SOURCE:

5
HDMI: Connect DVD/Blu-ray player or other equipment.
PC AUDIO
Coax: Digital output to AV receiver.
USB: Connect to USB device for multimedia (up to 1080P).
TV2(T2/C):

6
The remote control is using Infra-Red(IR). Point it towards the front of the LED TV. The remote
control may not work correctly if it is operated out of range or out of angle.
POWER MUTE
EPG
INPUT
MENU EXIT
VOL CH
PICTURE
SETUP
A-B GOTO
D-MENU
TITLE
HOLD SIZE SUBPAGE INDEX
NICAM/A2
TV/TXT CANCEL REVEAL
SOUND SLEEP
FAV
1234
5678
9 0
DISPLAY
REP
SUBTITLE
OK
CH/LIST
PRO
SLOW
SCREEN
LAN

7
POWER MUTE
EPG
INPUT
MENU EXIT
VOL CH
PICTURE
SETUP
A-B GOTO
D-MENU
TITLE
HOLD SIZE SUBPAGE INDEX
NICAM/A2
TV/TXT CANCEL REVEAL
SOUND SLEEP
FAV
1234
5678
9 0
DISPLAY
REP
SUBTITLE
OK
CH/LIST
PRO
SLOW
SCREEN
LAN

8

9
1.Press the menu button
2.Press button,enter “SETUP” page,choose First Time Installation by pressing button.
Press OK for Auto Tuning.
Tune Type :Select Tune Type as DTV+ATV or DTV, you can choose Air(DVB-T), Cable(DVB-C), in “Digital Type”.
Air(DVB-T) Auto Tune:
Select DTV+ATV in “Tune Type”, and DVB-T in Digital Type, then press OK to start tuning.

10
Tuning Setup
Tune Type DTV + ATV
Digital Type DVB-C
Scan Type Full
Network ID Auto
Frequency Auto
Symbol Rate Auto
Cable (DVB-C) Auto Tune:
Select DVB-C in “Digital Type”:
There are 2 options for DVB-C “Scan Type”:
1.Full: Select “FULL”in “Scan Type”and choose “OK” to start Auto Search for the channels.
2.Network:Select “Network” in “Scan Type” Input the number of the Network ID of the channel and
choose the frequency and press “OK” button to find specific TV channel. (Please notice you need
to know the Network ID + Frequency+Symboal Rate from your TV provider).
MENU Back ENTER Start
Tuning Setup
Tune Type DTV
Digital Type Satellite
Satellite 01 HOTBIR...
Scan Mode Default
Channel Type Free+Scaram...
Service Type All
MENU Back ENTER Start
Satellite(Auto Tune):
Select “Satellite” in “Digital Type”:
Operations in Satellite Auto Tune menu are show in the following table:
Option Value
Satellite 60 satellite for searching
Scan Mode Default,Blind Scan,Network
Channel Type Scramble,free,free+Scaramble
Service Type All,Radio,DTV

11
OK
OK
Refer to P. 9 and P.10.

12
Press MENU,then choose ATV Manual Tuning.
Start searching channel by presing button.
Once a channel is found,it will automatically stored.
Repeat the step by changing the channel number.
DTV Manual Tuning
DVB-T Manual Tuning:
Enter the DTV Manual Tuning. Press / button to adjust the channel and press OK button to manual tune.
DVB-C Manual Tuning:
Enter the CADTV Manual Tuning. Press / button to select the item and press / button to adjust the
“Frequency”, “Symbol”, “QAM Type” and press OK button to manual tune.

13
OK
OK
Fav button to add or remove the channnel to/from your
favorite list.

14
OK

15
S

1516
OK
OK
OK

17
OK
OK
press "OK" button to confirm selection and
enter the sub-menu.
press "OK" button
to confirm selection and enter the sub-menu.

18
press "OK" button to
confirm selection and enter the sub-menu.
press "OK" button to confirm selection and enter the sub-menu.