Denver LED-2469S User manual

HD LED TV with DVB-T2/S2/DVB-C
and H.265/HEVC Support
User’s Guide
NOTE:
Read all of the instructions before using this TV and keep the instruction
manual in a safe place for future reference.
Model: LED-2469S

Contents
Select Input Source 8
First Time Installation 9-10
Main Menu Operation 11-13
1.Picture menu 14-15
OSD MENU 14-25
2.Sound menu 16
3.Time menu 17-18
4.Lock menu 19-21
5.Setup menu 22-25
Media Operation 26-30
6.Screen menu 26

1

2

3
Due to the manufacturing process of components, televisions and other electronic products
can have parts that may produce a smell after the product is first turned on and warms up.
The smell will usually dissipate within a few days of use and does not return.
This is normal and occurs with many electronic products. Please ensure there is sufficient
ventilation around the TV and in the room and the odor will dissipate.

4
POWER/STANDBY:
INPUT/SOURCE:

5
HDMI: Connect DVD/Blu-ray player or other equipment.
PC AUDIO
Coax: Digital output to AV receiver.
DC rotpadasniamehtottcennoC
USB: Connect to USB device for multimedia (up to 1080P).
TV2(T2/C):

6
The remote control is using Infra-Red(IR). Point it towards the front of the LED TV. The remote
control may not work correctly if it is operated out of range or out of angle.
CH.LIST: Display the programs list.
EPG: To show the Electronic Program Guide during no-
menu state only in DTV mode.
FAV: Display the favorite program list.
SLEEP: StandbyTimer
PICTURE: Select the picture mode.
SOUND: Select the sound mode.
POWER(red button): Turn the TV on/standby.
MUTE: Press to mute the sound, press again or press
VOL+ to unmute.
Buttons for Basic operating
MENU: Press to display the OSD menu.
INPUT : Display the input source menu.
EXIT: Press to exit the OSD menu.
THUMBSTICK( OK): Allows you to navigate
the on-screen menus and adjust the system settings to your
preference.
NUMBER BUTTONS: Choose channel directly. Press
number buttons and press OK button to play the channel.
: Return to the previous channel viewed.
ASPECT: Adjust picture size
SUBTITLE: Turn on/off the subtitle display in DTV mode
TV/RADIO: Switch to TV/RADIO.
DISPLAY: Press to display the current mode’s information.
ETUMREWOP
DISPLAY
MENU
TV/TXT CANCEL REVEAL NICAM/A2
INDEX HOLD SIZE SUBPAGE
EXIT
HCLOV
1 2 3 4
5 6 7 8
9 0
INPUTTV/RADIO
PICTURE SOUND ASPECT SLEEP
SUBTITLE CH.LIST EPG FAV
OK

7
ETUMREWOP
DISPLAY
MENU
TV/TXT CANCEL REVEAL NICAM/A2
INDEX HOLD SIZE SUBPAGE
EXIT
HCLOV
1 2 3 4
5 6 7 8
9 0
INPUTTV/RADIO
PICTURE SOUND ASPECT SLEEP
SUBTITLE CH.LIST EPG FAV
OK
Buttons for TELETEXT operating
You could use the buttons only in TELETEXT .
TV/TXT: Turn off/on the Teletext display.
REVEAL: Reveal any hidden text.
HOLD: Hold or carry on the current subpage.
Colour buttons : Short cuts-follow the coloured links in the text.
INDEX: Go to index.
CH / : Channel/Program +/-.
VOL +/- : Volume +/-.
: Fast forward.
: Fast reverse.
: Previous chapter.
: Next chapter.
: Stop program.
: Play/pause program.
SIZE: Press to see top half of page double size. Press again to
see the bottom half of page double size. Press again for
normal size.
CANCEL: Cancel the Teletext display.
NICAM/A2: TV Nicam/A2 select.
SUBPAGE: Press to enter subpages, press again to cancel.

8

9
1.Press the menu button
2.Press button,enter “SETUP” page,choose First Time Installation by pressing button.
Press OK for Auto Tuning.
Tune Type :Select Tune Type as DTV+ATV or DTV, you can choose Air(DVB-T), Cable(DVB-C), in “Digital Type”.
Air(DVB-T) Auto Tune:
Select DTV+ATV in “Tune Type”, and DVB-T in Digital Type, then press OK to start tuning.

10
Tuning Setup
Tune Type DTV + ATV
Digital Type DVB-C
Scan Type Full
Network ID Auto
Frequency Auto
Symbol Rate Auto
Cable (DVB-C) Auto Tune:
Select DVB-C in “Digital Type”:
There are 2 options for DVB-C “Scan Type”:
1.Full: Select “FULL”in “Scan Type”and choose “OK” to start Auto Search for the channels.
2.Network:Select “Network” in “Scan Type” Input the number of the Network ID of the channel and
choose the frequency and press “OK” button to find specific TV channel. (Please notice you need
to know the Network ID + Frequency+Symboal Rate from your TV provider).
MENU Back ENTER Start
Tuning Setup
Tune Type DTV
Digital Type Satellite
Satellite 01 HOTBIR...
Scan Mode Default
Channel Type Free+Scaram...
Service Type All
MENU Back ENTER Start
Satellite(Auto Tune):
Select “Satellite” in “Digital Type”:
Operations in Satellite Auto Tune menu are show in the following table:
Option Value
Satellite 60 satellite for searching
Scan Mode Default,Blind Scan,Network
Channel Type Scramble,free,free+Scaramble
Service Type All,Radio,DTV

11
OK
OK
Refer to P. 9 and P.10.

12
Press MENU,then choose ATV Manual Tuning.
Start searching channel by presing button.
Once a channel is found,it will automatically stored.
Repeat the step by changing the channel number.
DTV Manual Tuning
DVB-T Manual Tuning:
Enter the DTV Manual Tuning. Press / button to adjust the channel and press OK button to manual tune.
DVB-C Manual Tuning:
Enter the CADTV Manual Tuning. Press / button to select the item and press / button to adjust the
“Frequency”, “Symbol”, “QAM Type” and press OK button to manual tune.

13
OK
OK
Fav button to add or remove the channnel to/from your
favorite list.

14
OK

15
S

1516
OK
OK
OK

17
OK
OK
press "OK" button to confirm selection and
enter the sub-menu.
press "OK" button
to confirm selection and enter the sub-menu.

18
press "OK" button to
confirm selection and enter the sub-menu.
press "OK" button to confirm selection and enter the sub-menu.