Denver TVD-1401 User manual

16
OPERATION INSTRUCTIONS
WARNING: The Main Power Switch is the Manually Operated Mechanical Switch (MOMS). It is requested to
Manually to turn On and Off the Main power. The Remote control can not cut off main voltage at the TV set. For
safety purpose, turn off the Main Switch manually when long time not use the TV or for the long vacation. Press
once will turn on the Main supply of the TV set. The Power indicator will light up. To make sure the power is
turn off, please fully press the Main switch and make sure the power indicator light off.
Turn the TV set on, then power indicator will light up. The picture will appear after a few seconds. (If tuned on)
The program number is displayed on the top right-hand corner of the screen.
MENU BUTTON
1.Press this button to select menu. PRESET, PICTURE, SYSTEM ,and TIME menu can be selected cyclically.
2.After enters each menu, you can select the item which you will adjust by PROG.+/- buttons, and adjust this
item by VOL. +/- buttons.

17
TV OPERATION
1.Asure that all the needed signal wires are connect to the TV set.
2.To turn on the TV, press the POWER button, and the power indicated LED lamp will be on.
3.If you first use this TV set, you have to search program, once you have done the following steps, the
program list will be stored in the TV memory.
Press MENU button once and the PRESET function menu will be display on screen, choose the ASM and
then press VOL± to start auto search. Once this function is finished the channel will goto the first program
automatically.
4.PROG +/- Buttons
Press and release the PROG +/- button, the channel automatically stops at the next/previous channel set into
memory. Press and hold the button down to change channels more quickly Direct Channel Selection
Buttons (0-9). Press these buttons to select a channel directly. The channel number will appear on the upper
right corner of the TV screen. If an invalid channel number is selected, the display will revert to the
previous channel.
5. The volume can be adjusted to a desired level by pressing the VOL +/- button the VOLUME will be
indicated on the TV screen by GREEN BARS AND NUMBER. As the sound level increase, so do the BAR
AND NUMBER on the screen, the same is true for decreasing the level.
6. CHILD LOCKED The TV set can provide the panel key control locked or prevent your children for watching
the TV set. Press the "LOCK" button on remote control unit. The key locked ( ) is displayed on the screen.
Then the symbol will disappear after change of the program or released child locked mode. You can not use any
panel control key on the TV set while locked. Only the remote control can normal operate the TV set .The "key
locked " symbol ( ) is displayed on the screen when turn off the Main switch and turn on again. It can release
the child lock totally by pressing "LOCK" button or press the standby to turn off the TV set and turn on
again .The child lock keep locked but you can operate the TV set by remote control. Keep the remote control out
of child after locked.
NOTE:
If the station being viewed stops broadcasting and BACKGROUND being on, the TV will automatically
shut off after 5 minutes.