Denver TAD-90032MK2 User manual

TAD-90032MK2

Warning:
1. To reduce the risk of fire or electric shock, do not expose this apparatus to rainor
moisture. The apparatus shall not be exposed to dripping or splashing and thatobjects
filled with liquids, such as vases, shall not be placed on apparatus.
2. The direct plug-in adapter is used as disconnect device, the disconnect divice shall
remain readily operable.
3. This equipment is a Class II or double insulated electrical appliance. It has been
designed in such a way that it does not require a safety connection to electrical earth.
4. This lightning flash with arrowhead symbol within an equilateral triangle is intended
to alert the user to the presence of non-insulated “dangerous voltage” within the pro--
duct’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
To reduce the risk of electric shock, do not remove cover (or back) as there are o user-
serviceable parts inside. Refer servicing to qualified personnel. The exclamation point
within an equilateral triangle is intended to alert the user to the presence of important
operating and maintenance instructions in the literature accompanying the appliance.
5. Correct Disposal of this product. This marking indicates that this product should not
be disposed with other household wastes throughout the EU. To prevent possible harm
to the environment or human health from uncontrolled waste disposal, recycle it respo--
nsibly to promote the sustainable reuse of materialresources. To return your used device,
please use the return and collection systems or contact the retailer where the product
was purchased.

(1*/,6+  (1*/,6+

1
2
3
4
5
6
7
8
7.MIC
8. SD CARD
6. RESET
1. POWER
2.Headphone
3. USB
4. DC
5. VOL +/-
denver-electronics.com
TAD-90032MK2

(1*/,6+(1*/,6+

(1*/,6+(1*/,6+

(1*/,6+(1*/,6+

(1*/,6+(1*/,6+