Derungs UV steriliser 001 User manual

UV Steriliser
Instruction manual
ENG
D80200 / V 1.1 / 050620

COMPONENTS
Product USB charging
cable
UV LED
Pedestal
Micro USB
LED charge status

PRODUCT DESCRIPTION
- The UV steriliser is equipped with 13 UV LEDs, a
lithium-polymer battery, a rotary motion sensor, a
sliding button and a pedestal.
-The UV steriliser was designed for cleaning
devices and surfaces. It is developed and proven
to be effective against certain bacteria and viruses
when used properly.
- The small, shapely design enables carrying it in
your pocket.
- A charged battery allows approx. 60 minutes.
- The effectiveness has been tested against
bacteria / viruses:
• Escherichia coli
• Klebsiella pneumoniae
• Pseudomonas aeruginosa
• Staphylococcus aureus (MRSA)
• Feline Coronavirus

1. To charge the battery, the UV Steriliser needs to
be closed, connected with the USB charging cable
and connected to a standard smartphone charger.
2. The charging process takes about 80 minutes and
is finished when the green light is on continuously.
3. To disinfect, point the UV steriliser with the logo
side up and bring it close to the target object. The
closer the UV Steriliser comes to the target object,
the faster the sterilisation is effective.
4. To protect eyes from UV radiation, the product will
automatically turn off when the logo side is facing
down.
5. As soon as you push the two trays apart, the UV
light will turn on and start sterilisation.
6. Sterilisation can be ended by pushing the two
housing parts together or the unit switches off
automatically after approx. 3 minutes.
HANDLING

7. The pedestal helps to place the steriliser near the
target area.
8. Note: UV light cannot penetrate transparent glass
or plastic.