designer's image WIL-1636-5B User manual

Adjustable 5-Shelf Kit
Assembly Instructions
Warning
Maximum load capacity is 350 pounds equally
distributed per shelf

Parts List
A
B
Tapered Support Post with
Plastic Sleeve Threaded End and
20 sets each Leveling Foot
2 sets spare 4 each
(7/8" OD, 36.5"L)
C D
Support Post With Shelf
Plastic Cap and 5 each
Threaded End (16"D x 36"W)
4 each
(7/8" OD, 35.6" L)
E
Tipping Restraint
Hardware
1 each
Rubber Mallet Recommended

Assembly Instructions
Step 1: Attach support posts with plastic cap and threaded end (C) to
support posts with threaded end and leveling foot (B)
Step 2: Choose desired bottom shelf height and snap tapered plastic
sleeves (A), with the small tapered side facing up, to the groove at the
selected height on all four supports.
Step 3: Slide a shelf (D) along the pre-connected support posts until it has
a snug fit with the sleeve.
Step 4: Set the unit upright and push down firmly on the corners of the
shelf (D) to secure it. Lightly tap the shelf corners with a rubber mallet.
Step 5: Choose next desired shelf height and snap tapered plastic
sleeves, with the small tapered side facing up, to the groove at the selected
height on all four supports. Slide a shelf along the pre-connected support
posts until it has a snug fit with the sleeve. Set the unit upright and push
down firmly on the corners of the shelf to secure it. Lightly tap the shelf
corners with a rubber mallet.
Step 6: Repeat Step 5 for the remaining shelves.

TIPPING RESTRAINT HARDWARE
There is one set of tipping restraint hardware included in this shelf kit. When properly installed, this
restraint can help limit the risk of unexpected tipping of the unit. It is strongly recommended that
this hardware is installed properly to limit the possibility of tipping due to slight tremors or bumps.
Full instructions for the installation of the tipping restraint hardware are printed on the back
of the hardware bag. Please carefully read and follow these instructions to
correctly install the tipping restraints.
“KEEP THESE INSTRUCTIONS FOR FURTHER REFERENCE”
Your assembly should now be complete.
Thank you for your purchase