DETEWE opencom 100 User manual

1
OpenCom 100/OpenCom X300:
Code-number Procedures
You can use the code-number procedures on every terminal (these are standard and ISDN
terminals as well as system telephones). On a system telephone many procedures can be carried
out comfortably by using the system telephone’s menu.
Dial out
Making internal calls (on automatic
seizure of external line)
H**Z (internal tel. no.) 1]
Deactivating Least Cost Routing
(LCR)
H##Z (dialling code, tel. no.) 1]
VIP call H*#Z (internal tel. no.) 1]
Calling the entrance intercom H*101 (not with OpenCom 107) 1]
Calling a “DoorLine” entrance
intercom
H*102 1]
Door opener H*11 1]
Keypad dialling H*12Z (keypad code digits) 1]
Announcement H*13*Z (internal tel. no.) #1]
Calling Line Identification
Restriction (CLIR) by call
H*14Z(tel. no.) 1]
Baby call on: H*53* (external access code, e.g. 0)
Z(destination tel. no.) #
off: H#53#
Speed dialling H*7Z (speed dialling no.) 1]
alternatively: H*7*Z(speed dialling no.) #1]
Dial in
Leaving a callback request
(a/b, DECT-GAP)
on: G*37#
alternatively: G6h
off: G#37#
Pick-up H*0#G… 1]
Pick-up selective H*0*Z (internal tel. no.) #G… 1]
Logging out of/into all hunt groups log out: H*31#
log in: H#31#
Logging out of / into individual hunt
groups
log out: H*31*Z (internal tel. no.) #
log in: H#31*Z (internal tel. no.) #
oc_kba_codes_en.fm Seite 1 Freitag, 20. Oktober 2006 3:50 15

2
Connections
Parking / Unparking a call park: GR*16(Park-Codes 0-9) h
unpark: H*16 (Park-Codes 0-9)
Rejecting a waiting call GR0G… (a/b, DECT-GAP)
Disconnecting a call GR1G… (a/b, DECT-GAP)
Toggling / Accepting a waiting call /
Ending a three-party conference
GR2G… (a/b, DECT-GAP)
Starting a three-party conference GR3G… (a/b, DECT-GAP)
Connecting two external parties
with each other 2]
R#h … (a/b, DECT-GAP)
All call forwardings off H#2#
Deleting all call forwarding in the
exchange
H*184Z (system PIN) #
Call forwarding “immediately”
for all (internal and external) calls
on: H*21* (external access code, e.g. 0)
Z(destination tel. no.) #
off: H#21#
Call forwarding “immediately”
for internal calls
on: H*211*(external access code, e.g. 0)
Z(destination tel. no.) #
off: H#211#
Call forwarding “immediately”
for external calls
on: H*212* (external access code, e.g. 0)
Z(destination tel. no.) #
off: H#212#
Call forwarding “immediately”
for MSN 3]
on: H*213*Z (MSN) *
Z(destination tel. no.) #
off: H#213*Z (MSN) #
Call forwarding “immediately”
for other users
on: H*214*Z (user’s internal tel. no.) *
Z(destination tel. no.) #
off: H#214*Z (user’s internal tel. no.) #
Follow Me
(on on the destination telephone /
off on another telephone)
on: H*22*Z (source PIN) *
Z(source tel. no.) #
off: H#22*Z (source PIN) *
Z(source tel. no.) #
Call forwarding “after delay”
for all (internal and external) calls
on: H*61* (external access code, e.g. 0)
Z(destination tel. no.) #
off: H#61#
Call forwarding “after delay”
for internal calls
on: H*611* (external access code, e.g. 0)
Z(destination tel. no.) #
off: H#611#
oc_kba_codes_en.fm Seite 2 Freitag, 20. Oktober 2006 3:50 15

3
Call forwarding “after delay”
for external calls
on: H*612*(external access code, e.g. 0)
Z(destination tel. no.) #
off: H#612#
Call forwarding “after delay”
for MSN 3]
on: H*613*Z (MSN) *
Z(destination tel. no.) #
off: H#613*Z (MSN) #
Call forwarding “after delay”
for other users
on: H*614*Z (user’s internal tel. no.) *
Z(destination tel. no.) #
off: H#614*Z (user’s internal tel. no.) #
Call forwarding “on busy”
for all (internal and external) calls
on: H*67*(external access code, e.g. 0)
Z(destination tel. no.) #
off: H#67#
Call forwarding “on busy”
for internal calls
on: H*671*(external access code, e.g. 0)
Z(destination tel. no.) #
off: H#671#
Call forwarding “on busy”
for external calls
on: H*672*(external access code, e.g. 0)
Z(destination tel. no.) #
off: H#672#
Call forwarding “on busy”
for MSN 3]
on: H*673*Z (MSN) *
Z(destination tel. no.) #
off: H#673*Z (MSN) #
Call forwarding “on busy”
for other users
on: H*674*Z (user’s internal tel. no.) *
Z(destination tel. no.) #
off: H#674*Z (user’s internal tel. no.) #
Forwarding entrance intercom calls
(on an OpenCom 100) 4]
on: H*151 (for doorbell 1) *(external
access code, e.g. 0)Z(destination tel. no.) #
off: H#151 (for doorbell 1) #
Forwarding entrance intercom calls
(on an OpenCom X300) 4]
on: H*155 (for doorbell 1) *(external
access code, e.g. 0) Z(destination tel. no.) #
off: H#155 (for doorbell 1) #
Protection
Telephone lock on: H*33*Z (user PIN) #
off: H#33*Z (user PIN) #
Call protection for all
(internal and external) calls
on: H*42#
off: H#42#
Call protection for internal calls only on: H*421#
off: H#421#
Call protection for external calls only on: H*422#
off: H#422#
oc_kba_codes_en.fm Seite 3 Freitag, 20. Oktober 2006 3:50 15

4
1] Consultation Calls
You can also carry out this code-number procedure during consultation calls:
GR press the R key during the current call
2] Connecting Two External Parties with Each Other
If you connect two external parties whom you called, you will be charged for the cost of the
resultant call.
3] MSN Call Forwarding
You can forward several MSNs together to an external telephone number. The individual MSNs
are separated using *. You do not need to enter the full MSNs - the last unique digits are all you
need, as this is sufficient to distinguish them from one another.
4] Doorbell
Several doorbells can be configured in the OpenCom 100/OpenCom X300. You can forward these
doorbells using the appropriate code number procedure. The user guide for the standard ter-
minals provides an overview.
Call waiting on/off
(= call waiting protection off/on)
on: H*43#
off: H#43#
Remote service on: *19*Z (system PIN) #
off: #19#
Hotel
Room has been cleaned *170
Wake-up call on/off on: H*55*(time, e.g. 0615)
off: H*55#
Others
Activating automatic time control H*8#
Manually setting a time group H*8*Z(number of the time group, e.g. 1)#
Changing the user PIN H*99*Z (old user PIN) *
Z(new user PIN) *Z (new user PIN) #
Configuring IP address *182Z (system PIN)
*111 *222 *333 *444 #
Configuring network mask *183Z (system PIN)
*111 *222 *333 *444 #
Restart *185Z (system PIN) #
Show firmware version (revision) *186
Show own port *187
Show system type *188
DeTeWe Systems GmbH As of June 2006 Subject to changes
oc_kba_codes_en.fm Seite 4 Freitag, 20. Oktober 2006 3:50 15