Devine MPS 500 User manual

Devine MPS 500
Dual 48V Microphone
Phantom Supply
User manual
Any information and illustrations shown in this user manual are subject to change without further notice.
User manual version: 1.0 Creation date + author initials: 27-01-2014 DK Revision date + author initials: 27-01-2014 DK

Introduction
Thank you for purchasing this Devine MPS 500 Dual Phantom Supply. Before you unpack all the received
items, carefully read this manual to ecome familiar with the functions of this product. Also check the
contents of the ox to make sure all necessary parts are included. If the MPS 500 fails to operate properly, or
if you have any pro lems while using it, disconnect it and contact your local dealer for more information and
help.
Box contents
- Devine MPS 500 Dual Phantom Supply
- Power supply
Unit and accessory inspection
- If the unit is not going to e used for a longer period of time, disconnect it and store it in a dust-free
environment.
- Always check the unit for possi le damage efore use. If you suspect that something is wrong with the unit,
do not connect it! When you suspect that your unit is roken or damaged, contact your local dealer or a
certified technician to inspect the unit.
Note: Illustrations shown in this manual may vary from the actual product.
Any information and illustrations shown in this user manual are subject to change without further notice.
User manual version: 1.0 Creation date + author initials: 27-01-2014 DK Revision date + author initials: 27-01-2014 DK

Description
The Devine MPS 500 Dual Phantom Supply is a high quality dual channel 48 Volt Phantom Power Unit,
designed to e used with condenser microphones. The MPS 500 delivers simple phantom power without any
sound degradation. The MPS 500 has two XLR Inputs and two XLR Outputs, an On/OFF Power switch and a
LED-indicator.
Usage
The MPS 500 ena les the connection of a condenser microphone to a computer or mixing desk that does
not supply phantom power.
For connections to a computer we recommend the use of a Balanced to Stereo XLR-3.5 mm ca le. This will
send the MONO/Balanced signal from the MPS 500 to the STEREO input of the computer.
The MPS 500 is a phantom supply only, and not a splitter or com iner.
Any information and illustrations shown in this user manual are subject to change without further notice.
User manual version: 1.0 Creation date + author initials: 27-01-2014 DK Revision date + author initials: 27-01-2014 DK

Troubleshooting
Problem Possible Cause Solution
No sound No power Make sure the AC Adapter is
connected properly
Volume set too low Increase incoming volume and
gain on your mixer, interface or
other sound processing device
Any information and illustrations shown in this user manual are subject to change without further notice.
User manual version: 1.0 Creation date + author initials: 27-01-2014 DK Revision date + author initials: 27-01-2014 DK

Technical specifications
- 48V Dual Phantom Supply
- for use with condenser microphones
- 2 x XLR Inputs
- 2 x XLR Outputs
- AC Power Adapter: 230V
- Working current: 18V DC
- Weight: 0.77 kg
- Dimensions: 55 x 121 x105 mm (HxBxD)
Included in package:
AC Adapter 18V
- Model: YJZ-1800300
- Input: 230VAC, 50 Hz
- Output: 18VAC, 300mA
Any information and illustrations shown in this user manual are subject to change without further notice.
User manual version: 1.0 Creation date + author initials: 27-01-2014 DK Revision date + author initials: 27-01-2014 DK