Devolo Home Control User manual

Home Control Motion Sensor
Home Control
Motion Sensor
fi rst steps

2
Thank you for placing your trust in this devolo product.
Carefully read all instructions before setting up the device and store the instructions for later reference.
Icons
Very important note. Failure to observe this note may result in damage.
Important note that should be observed.
Background information and configuration tips for your device.
Intended use
Use the Home Control Motion Sensor as described in these instructions and in the Home Control online help
to prevent damage and injuries.
Except for occasional battery replacement, the Home Control Motion Sensor is com-
pletely maintenance-free. The device contains no user-serviceable parts!
CE conformity
When used as intended, the product conforms to the basic requirements of the directives
1999/5/EC (R&TTE), 2014/53/EU, 2014/30/EU, 2014/35/EU and the other relevant provisions
of the Radio and Telecommunications Terminal Equipment Act (FTEG) and is designed for
use in the EU, Switzerland and Norway. A printout of the CE declaration is included.

3
devolo Home Control
Home Control (also known as home automation) refers to the specific control of electrically operated indoor
household devices. The Home Control system by devolo uses the Z-WaveTM wireless standard.
A Home Control system requires a Z-WaveTM-compatible control unit such as the Home Control Central Unit
from devolo. Use its Home Control portal to coordinate the Home Control Motion Sensor and all other
Home Control devices. You can access the Home Control Central Unit through the my devolo app and at
www.mydevolo.com in a browser.
For more information about setting up the Home Control Central Unit, please refer to the instal-
lation guide and/or Home Control online help.
Accessing the Home Control Central Unit via the my devolo app (for smartphone/tablet)
Open the my devolo app Home Control and select your Home Control Central Unit.
Accessing the Home Control Central Unit via web browser (PC/laptop)
At www.mydevolo.com Home Control select your Home Control Central Unit.
For more information on the control and configuration of all devolo Home Control devices, as well
as application examples, please refer to the Home Control online help.

4

5
The Home Control Motion Sensor
The Home Control Motion Sensor measures brightness and temperature. Detects movements in an angle of 80
degrees horizontally and in a distance of up to 8 metres. The integrated light sensor can also be an impulse
transmitter for the light controls. Furthermore, the Home Control Motion Sensor has an integrated LED and a
release button.
For more detailed descriptions of the Home Control Motion Sensor functions, refer to the
Home Control online help.
Sensor
Red LED
Release button
(see rear side of the device)

6
Batteries
Always keep batteries away from open flame and high temperatures. Avoid direct
sunlight and heat radiation!
Always remove all batteries from battery-operated devices that are only in storage
and are not in use. Old batteries can leak and damage the device!
Do not use rechargeable batteries!
When inserting the battery, make sure the polarity is correct. Using the battery in-
correctly can damage the device!
The Home Control Motion Sensor requires a commercially available CR123(A) lithium battery. For
information on replacing the battery, please refer to the Home Control online help.
Registering the Home Control Motion Sensor on the control unit (e.g. devolo Home Control Central
Unit)
Only use the Home Control Motion Sensor indoors.
Avoid placing the Home Control Motion Sensor in direct sunlight or radiant heat!
Without installing it, place the Home Control Motion Sensor near the location you would like it to be
(such as a door frame or passageway).
When you plug in the Home Control Central Unit from devolo, follow the description in the section
devolo Home Control on page 3 to call up your Home Control Central Unit and select Devices 

7
Add device  devolo Home Control Motion Sensor. Follow the instructions in the Home Control
portal for logging into your Home Control Central Unit.
Installing the Home Control Motion Sensor
Install the Home Control Motion Sensor on a flat and level surface so that the black
release button on the rear of the sensor is depressed when the device is installed.
Before permanently fastening the Home Control Motion Sensor at the desired location, test whether the
sensor can be triggered. If the LED flashes when passing by, the sensor is positioned optimally.
If using the double-sided tape to fasten the Home Control Motion Sensor, adhere the tape
strip to the centre (below the release button) on the rear of the sensor and attach the
Home Control Motion Sensor to the desired location.
If installing to a wall using screws, make sure that no gas, water or power lines in
the wall get damaged. There is a danger of electric shock!

8
If you use screws to attach the Home Control Motion Sensor, take apart the upper and lower
housing component of the sensor by pressing the tab down in order to release the housing compo-
nents (from top to bottom, and ).
쑗Based on the template on the lower housing component, drill holes into the desired location and
attach the lower component of the sensor using screws.
쑗Insert the bottom end of the upper housing component into the groove  provided for this purpose
in the lower component.
쑗Subsequently, insert the entire upper component (from bottom to top, and ) onto the lower
component as far as it will go. This completes the installation of the Home Control Motion Sensor.
From now on, you can take electronic control conveniently using the Home Control portal of the
Home Control Central Unit. For more information on the control and configuration of all devolo
Home Control devices, as well as application examples, please refer to the Home Control online help.

9
Service and warranty
Warranty: 3 years
If your devolo device is found to be defective during initial installation or within the warranty period, please
contact the vendor who sold you the product. The vendor will take care of the repair or warranty claim for you.
The complete warranty conditions can be found at www.devolo.com/warranty.
Disposal
Neither the Home Control Motion Sensor nor the battery may be disposed of with the household waste. In-
stead, you can return these at no charge at your municipal collection point or at the retailer (e. g. supermarket,
specialist shop).
Great Britain 0203 024 18 38 (national rate) [email protected]
Sweden 0077 1400 480 (national rate) [email protected]
Finland 972 519 125 (national rate) [email protected]
Norway 81 500 174 (national rate) [email protected]
Denmark 070 136 001 (national rate) [email protected]
Other countries [phone] (international rate) [email protected]

10

11

devolo AG
Charlottenburger Allee 60
52068 Aachen – Germany
www.devolo.com
40961/0115