DeVorm Big Round User manual

p. 1
Big Round
Installation Guide

p. 2
Index
Introduction p. 3
Mounting Materials p. 4
Tools p. 5
Big Round parts p. 6
Assembling the hexagon frame p. 8
1. Parts required
2. Tools required
3. Place frame on furniture blanket
4. Prepare the bushing (and all positions)
5. Prepare the connectors
6. Place bushing
7. Place connectors
8. Tighten the screw in the bushing
9. Connect profiles
10. Tighten bushing
11. Connect two halfs of the hexagon
Assembling the table legs p. 13
12. Parts required
13. Tools required
14. Placement of the sliding nut
15. Assembling the leg
16. Right orientation of the feet of the legs
17. Placement of the adjustable feet
Connect table tops p. 17
18. Parts required
19. The placement of the table top
20. Lock table top with one screw
21. Placement of the dominos
22. Placement of the second table top
23. Placement of the table connectors
24. Alignment of the table tops
25. Tighten table connector
26. Placement of sliding nut
27. Assemble L-brackets and screws
28. All screws assembled
29. Congratulations, it’s done!

p. 3
Introduction
Circular tables invite a sense of equality.
They divide people and space in an equal
ratio. A friendly way to be seated, as formal or
informal as you wish. Just like the rest of our
Big Collection, the Big Round is also highly
customizable. Choose the surface, colour,
shape and size to make this the perfect table
for any context.
The Big Round is available in three heights and
a wide range of dimensions. The modularity of
the system enables you to create robust tables
from Ø160 to Ø250 cm on just 3 legs.
In addition to this installation guide, you can
also consult the instruction videos on our
website via the following link:
www.devorm.nl/information-bank/installation-
guides/big-round-modular-table-system

p. 4
Mounting Materials
24x
Bushing
18x
Sliding Nut
24x
Screw M5×16
Quantity depends
on table size
Domino
Quantity depends
on table size
Table Connector
6x
Connector Hinge
3x
Adjustable Feet
12x
L-bracket
85 mm
6x
Connector Shifter
6x
Bolt M8×16
12x
Bolt M8×10
80 mm

p. 5
Tools
BZK6 BZK5 PZ2

p. 6
6x
Profile 63,5 cm
3x
Table Leg 74 cm
6x
Profile 71,5 cm
3x
Table Leg 95 cm
6x
Profile 89 cm
3x
Profile 110 cm
OR
OR
OR
OR
Table Frame
Table Legs

p. 7
OR
Table Top
Two parts
Table Top
One part
Depending on the table finish, you will
receive the table top in two parts or in one.

p. 8
Assembling the hexagon frame
Parts required Tools required
Place frame on furniture blanket
3x
Profile
8x
Bushing
Make sure to place frame
e.g. on protection blanket
to prevent damage.
Short connectors are
placed on the outside.
Long connectors are
placed on the inside.
Check: the outer
connector should be
able to rotate.
2x
Connector Hinge
2x
Connector Shifter
BZK5
!
!
3
21
85 mm
80 mm

p. 9
Prepare the bushing (and all positions)
Preparing the connectors
Place bushing
Connector Hinge Connector Shifter
!
!
!
!
6
5
4
3 2 1
3
3
Make sure the eye of the
bushings are perfectly in
line with the profile.
!

p. 10
Place connectors
Tighten the screw in the bushing Not too tight, leave room
for motion.
!
!
!
!
8
7
3
2
Make sure the tapered
holes are perfectly in line
with the bushings.
!

p. 11
Connect profiles
Tighten bushing
Repeat step 1 to step 10
untill you have 2 halfs of
the hexagon frame.
!
10
9
3
2

p. 12
Connect two halfs of the hexagon
11
3
2
1

p. 13
Assembling the table legs
Parts required
12
Tools required
BZK6
13
6x
M8×16
3x
Table Leg
1x
Table Frame
3x
Adjustable Feet
6x
Sliding Nut

p. 14
Placement of the sliding nut
14
A
A
SECTION
A-A
SCALE
1 : 1
A
A
SECTION
A-A
SCALE
1 : 1
A
A
SECTION
A-A
SCALE
1 : 1

p. 15
Assembling the leg
Right orientation of the feet of the legs
15
16

p. 16
Placement of the adjustable feet
17

p. 17
Parts Required
18
12x
Sliding Nut
Quantity depends
on table size
Domino
Quantity depends
on table size
Table Connector
12x
L-bracket
12x
Bolt M8×10
24x
Screw M5×16
Connect table tops
The placement of the table top
19

p. 18
Lock table top with one screw
20
Placement of dominos
21

p. 19
Placement of second tabletop
22
Placement of the table connectors
23
Not too tight, leave room
for motion.
!

p. 20
Alignment of the table tops
24
Tighten table connector
25 Tighten the table top
connector when both table
tops are perfectly aligned.
!