DeVorm Big 95 User manual

p. 1
Big Modular Table System
Installation Guide

p. 2
Index
Introduction p. 3
Mounting Materials p. 4
Tools p. 5
Big Table parts p. 6
Assembling the frame p. 7
1. Place frame on furniture blanket
2. Connect the profile
3. Insert crossbar
4. Tighten bushing after positioning
5. Insert sliding nuts
Assembling the table legs p. 11
6. Mounting of the table legs
7. Right orientation of the feet of the legs
8. Placement of adjustable feet
9. Mounting of the frame cover
10. Pre-tensioning
11. Tighten bushing
Connect table tops p. 14
12. Placement of dominos
13. Placement tabletop connectors
14. Alignment of the tabletops
15. Tighten table connector
16. Table top fastening
17. Congratulations, it’s done!

p. 3
Introduction
A table system characterized by its versatility.
Its modularity enables you to design tables for
a broad range of applications such as worksta-
tions or conference, canteen and boardroom
tables. One of the core features of the Big is
its ability to span large lengths on just 4 legs.
Choose from infinite surface, colour, shape and
size variations to make the perfect table for any
context.
In addition to this installation guide, you can
also consult the instruction videos on our
website via the following link:
www.devorm.nl/information-bank/
installation-guides/big-table-system

p. 4
Mounting Materials
Bushing
Sliding Nut
Screw M5×16 Self-tapping
M3×10
Only for Big Tables
larger than 450 cm:
Pre-tensioner angle
Extension Connector
Adjustable Feet
Universal Connector
Bolt M8×16
Connection materi-
Bushing Extension connector Universal connector
M8
Sliding-nut Adjustable foot M8x16 5x16 Self-tapping
M3x10
Connection materi-
Bushing Extension connector Universal connector
M8
Sliding-nut Adjustable foot M8x16 5x16 Self-tapping
M3x10
Connection materi-
Bushing Extension connector Universal connector
M8
Sliding-nut Adjustable foot M8x16 5x16 Self-tapping
M3x10
Connection materi-
Bushing Extension connector Universal connector
M8
Sliding-nut Adjustable foot M8x16 5x16 Self-tapping
M3x10
Domino Table Connector

p. 5
Tools
BZK6 BZK5 PZ2

p. 6
Table Frame
Table Legs
Tools:
Tools:
Tools:
Tools:
Tools:
Tools:
Tools:
Tools:
Tools:
Tools:
Tools:
Tools:
2400
1800
1200
420
670
970
Profile
1200 mm
Frame cover
Small
Big Table Legs
74 cm
Cross bar
160
Frame cover
Medium
Big Table Legs
95 cm
Cross bar
410
Cross bar
710
Frame cover
Big
Big Table Legs
110 cm
Profile
1800 mm
Profile
2400 mm

p. 7
Assembling the frame
Connect the profile
2
Screw all the Bushings
finger-tight by hand!
Do not use a drill.
Skip this step if your table
is shorter than 340 cm and
go to step 3.
!
!
Place frame on furniture blanket Make sure to place frame
e.g. on protection blanket
to prevent damage.
!
1

p. 8
Insert crossbar
3
Make sure the spacing
between the crossbars is
equally divided.
!

p. 9
The crossbar needs to align
perfectly with the top ends
of the 1200/1800/2400 mm
profiles.
!
Tighten bushing after positioning
4

p. 10
Insert sliding nuts
5
A
A
SECTION
A-A
SCALE
1 : 1
A
A
SECTION
A-A
SCALE
1 : 1
A
A
SECTION
A-A
SCALE
1 : 1
Push the sliding-nut in at
an angle and turn it 90°
until the spring pushes
the T-nut into place.
!

p. 11
Assembling the table legs
Mounting of table legs
6
Right orientation of the feet of the legs
7

p. 12
Placement of adjustable feet
Mounting of frame cover
8
9Use the self tapping
M3x10mm screws in order
to mount the frame cover.
!

p. 13
Pre-tensioning
Tighten bushings
10
11
Lift
By lifting the frame you
are able to create space
between the profiles. If this
is not suicient, untighten
the bushings a little.
Screw all the bushings
finger-tight by hand!
Do not use a drill.
!
!
!
Please note that we only
deliver the pre-tensioner
angle with larger tables.
Skip this step in case your
Big Table is shorter than
450 cm and proceed to
step 11.

p. 14
Placement of dominos
12 Skip this step if your table
top is one piece.
!
Connect table tops
Placement table connector
13

p. 15
Alignment of the table tops
14
Tighten table connector
15 Tighten the table top
connector when both table
tops are perfectly aligned.
!

p. 16
Congratulations, it’s done!
17
Table top fastening
16

p. 17
We create interior products
by today’s standards.
De Vorm is established in a new era, we develop products by
the standards of today. This means we produce eiciently, use
the full lifecycle of products and eventually give them a new life.
Our emphasis lies on making a product that works, by setting
a variety of conditions; it should be legible, accessible, but also
environmental friendly and aesthetically perfectly in balance.
We like a product because
of its functionality.
A good product makes life easier — it should be developed for
helping us function better throughout the day. We firmly believe
that the beauty of a design lies in the sum of functions that
makes it a complete product.
We continuously raise the bar.
From the very first sketches we start combining and developing
new techniques to find new possibilities to innovate. Our design
process is infused with technical development; techniques result
in aesthetic features and the other way round.
Leemansweg 45
6827 BX Arnhem
The Netherlands
T+31(0) 268 200 360
E[email protected]
Wwww.devorm.nl