Target warwick FKWWCNTBBR User manual

>>
© 2018 Target. The Bullseye Design is a trademark of Target Brands, Inc. All rights reserved.
warwick
console table
assembly instructions
style # FKWWCNTBBR (fawn brown)
dpci # 249-16-4845
tcin # 52716122
style # FKWWCNTBWH (white)
dpci # 249-17-3053
tcin # 54187472

2
Congratulations on your latest Target purchase.
Now what? Don’t start sweating over this box of parts. This will be easy. We did the hard work for you.
All you need to do is follow our simple instructions and you’ll be on your way to transforming your
room in no time. Good luck—though we’re condent you won’t need it.
before you begin
1. Check for damaged or missing parts. Call 1-855-MYTGTHOME (855-698-4846) to order missing supplies.
2. Use the carton as a working surface to prevent product damage during assembly.
3. Gather all tools prior to assembly.
tools needed

3
table of contents
introduction 2
hardware 4
parts list 5
how to use the cam lock system 6
assembly 7-13
QUESTIONS? Just call 1-855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have the style number and dpci number ready when calling.

4
hardware
(H1) x 18
wooden dowel
(H2) x 9
cam bolt
(H3) x 9
cam
(H4) x 2
handle
(H5) x 4
handle bolt
(H6) x 5
at head screw
(H7) x 1
allen wrench
(H8) x 8
bolt
(H9) x 8
lock washer
(H10) x 10
washer
(H11) x 1
wall anchor
(H12) x 1
wall strap
(H13) x 1
truss head screw
(H14) x 1
wall screw

5
exploded diagram
ITEM DESCRIPTION QUANTITY
A top panel 1
B left side frame 1
C right side frame 1
D back panel 1
E bottom panel 1
F drawer face 1
G left drawer side 1
H right drawer side 1
I drawer back 1
J drawer support 1
K drawer bottom 1

how to use the cam lock system
1.
Screw cam bolt into panel
2.
Align cam bolt(s) with cross-bored
hole(s) and insert all the way until
panels are ush
3.
Push cam into panel - arrow feature
on cam top points to panel edge
4.
Rotate cam(s) clockwise 180° to
lock panels together
5.
Panels should be tight against each
other and connection should be rigid
6
4. 5.
1. 2. 3.

7
step 1: attach back panel to top panel
(H2) x 2
cam bolt
(H3) x 2
cam
1.1. Screw-In cam bolts must be screwed down ush in top panel.
1.2. Refer to page 6 for instructions on how to use the cam lock system.
1.3. Do not over tighten bolts.

8
step 2: attach top panel and bottom panel to right side frame
(H1) x 5
wooden dowel
(H2) x 2
cam bolt
(H3) x 2
cam
(H8) x 4
bolt
(H9) x 4
lock washer
(H10) x 4
washer
(H7) x 1
allen wrench
2.1. Carefully tap small wooden dowels into place in right side frame. Leave 1/2” of the dowels sticking out.
2.2. Align bolts with pre-drilled holes to attach top panel and bottom panel to right side frame. Do not over tighten bolts.
2.3. Screw-In cam bolts must be screwed down ush in right side frame.
2.4. Refer to page 6 for instructions on how to use the cam lock system.
2.5. Do not over tighten bolts.
(H7) x 1
allen wrench

step 3: attach left side frame
(H1) x 5
wooden dowel
(H2) x 2
cam bolt
(H3) x 2
cam
(H8) x 4
bolt
(H9) x 4
lock washer
(H10) x 4
washer
(H7) x 1
allen wrench
3.1. Carefully tap small wooden dowels into place in left side frame. Leave 1/2” of the dowels sticking out.
3.2. Align bolts with pre-drilled holes to attach top panel and bottom panel to left side frame. Do not over tighten bolts.
3.3. Screw-In cam bolts must be screwed down ush in left side frame.
3.4. Refer to page 6 for instructions on how to use the cam lock system.
3.5. Do not over tighten bolts.
9
(H7) x 1
allen wrench

10
step 4: attach drawer sides, bottom, and support to drawer face
(H1) x 6
wooden dowel
(H2) x 3
cam bolt
(H3) x 3
cam
4.1. Carefully tap small wooden dowels into place in drawer face. Leave 1/2” of the dowels sticking out.
4.2. Screw-In cam bolts must be screwed down ush in drawer face.
4.3. Slide drawer bottom into drawer side panels and drawer face.
4.4. Refer to page 6 for instructions on how to use the cam lock system.
4.5. Do not over tighten bolts.
Carefully tap small wooden dowels into place in drawer face. Leave 1/2” of the dowels sticking out.

step 5: attach drawer back and handle
(H1) x 2
wooden dowel
(H6) x 5
at head screw
(H5) x 4
handle bolt
(H4) x 2
handle
5.1. Carefully tap small wooden dowels into place in drawer back. Leave 1/2” of the dowels sticking out.
5.2. Align at head screws with pre-drilled holes to attach drawer back to sides. Do not over tighten screws.
5.3. Align handle bolts with pre-drilled holes to attach handles to door. Do not over tighten bolts.
11

step 6: install drawer
6.1. Carefully align glides on drawer sides with glides on cabinet to install drawer.
12

step 7: install anti-tip kit
(H12) x 1
wall strap
(H13) x 1
truss head
screw
(H11) x 1
wall anchor
(H14) x 1
wall screw
(H10) x 2
washer
Position against wall
Mark position of strap hole on wall
Drill 1/4” hole
Tap in wall anchor
Fasten anti-tip strap with wall screw
provided
13
(H12)
(H11)
(H14)
(H10)
(H10)
(H13)
Mark position of strap hole on wall
Fasten anti-tip strap with wall screw
provided


  
  

 
      
     
  
 
  
 
    

 

    
 
 
1. This unit has been designed for the weight shown. Exceeding this recommended weight could result in
excessive “sagging” of the top. Extreme overloading can cause failure of the top and possible injury.
2. Furniture Care Instructions: Dust with a clean, lint-free cloth. Use a spray furniture polish as needed.
14
QUESTIONS? Just call 1-855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have the style number and DPCI number ready when calling.
55 lbs.
40 lbs.
30 lbs.


SALICE
Quality That Lasts A Lifetime
The maker of this product has extended his craftsmanship to
include Salice hinges and/or other Salice products.
Having undergone severe usage tests and met industry standards
worldwide, our products confirm our commitment to pleasing the
most discriminating customer - you.
THE
LIFETIME GUARANTEE AND LIMITED WARRANTY*
Salice America, Inc., warrants that all hinges and/or Salice products contained in
this product, (but not the product itself) against defects in material and workman-
ship for as long as the original consumer purchaser owns the products. Salice
will send the original consumer purchaser a new Salice hinge to replace any
defective Salice hinge subject to this warranty without charge. The warranty is a
warranty of replacement only. Salice specifically does not warrant removal of the
defective hinge nor installation of a new hinge. This warranty does not cover
hinges which have been incorrectly installed, exposed to excessive loads or
abused.
To obtain a replacement, you should, within 30 days of discovery of the defect,
remove the defective hinge and mail it postage prepaid to:
SALICE AMERICA Inc.
2123 CROWN CENTRE DRIVE
USA - CHARLOTTE NC 28227
Enclose a brief letter explaining the defect with a copy of your proof of purchase.
Allow approximately four (4) weeks for delivery of the replacement.
ALLWARRANTIES IMPLIED BYSTATE LAW, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITYAND FITNESS FOR
A PARTICULAR PURPOSE, ARE EXPRESSLY LIMITED AS SET FORTHABOVE. However, some states do not allow limitations on
how long an implied warranty lasts, so the above limitation may not apply to you. WITH THE EXCEPTION OF ANY WARRANTIES
IMPLIED BY STATE LAWAS HEREBY LIMITED, THE FOREGOING EXPRESS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU
OF ANY OTHER WARRANTIES OF SALICE WITH RESPECT TO THE REPAIR OR REPLACEMENT OF ANY PROPS OR PARTS.
IN NO EVENT SHALL SALICE BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES RESULTING FROM THE USE,
INSTALLATION, PERFORMANCE OR FAILURE OF ITS PRODUCT. However, some states do not allow the exclusion of limitation of
incidental or consequential damages, so the above exclusion may not apply to you. This limited warranty gives you specific legal rights
and you may also have other rights which vary from state to state.

© 2018 Target. The Bullseye Design is a trademark of Target Brands, Inc. All rights reserved.