DeVorm Mino Sofa Series User manual

Mino Sofa Series
Installation Guide

Parts
Tools
Remove all packaging material and use a power drill
with magnetic bit holder to remove (4x) screws in two
brackets
Place the Mino Sofa upside down on a flat surface
1 2
4
3
Mino Sofa Leg
4x
Mino Sofa
One, Two or Three Seats
Button head screw
M6 x 12 mm
8x
Be aware the sofa is fixed onto the pallet with (2x)
metal brackets
Use a protective blanket to avoid
damaging the upholstery
Remove the two brackets and felt strips
Slide the leg into the frame (4x)
Drill
Allen key
!
!

Use an Allen key to mount the (2x) screws M6 x 12 mm per leg.
Place the assembled Mino Sofa upright on a flat surface. You are all set!
6
5
Make sure all screws are tightened
correctly (5 Nm)
!

We create interior products
by today’s standards.
De Vorm is established in a new era, we develop products by
the standards of today. This means we produce eiciently, use
the full lifecycle of products and eventually give them a new life.
Our emphasis lies on making a product that works, by setting
a variety of conditions; it should be legible, accessible, but also
environmental friendly and aesthetically perfectly in balance.
We like a product because
of its functionality.
A good product makes life easier — by helping us function
better throughout the day. We firmly believe that the beauty
of a design lies in the sum of its functions. That is what makes
it a complete product.
We continuously raise the bar.
From the very first sketches we already start searching,
combining and developing new techniques to find new possibilities
to innovate. Our design process is infused with technical
development; techniques result in aesthetic features and the other
way round.
T+31(0) 268 200 360
E[email protected]
Wwww.devorm.nl