DeWalt XR Li-Ion DCD996 Manual

H
H

H
H
Sku DCD996P2 DCD991P2
Description 18V XR BL Hammer Drill Driver 18V XR BL Drill Driver
Chuck Capacity (mm)
1.5-13 1.5-13
Chuck Carbide
Yes Yes
Battery (Voltage)
18 18
Power Output (Ah)
5.0Ah 5.0Ah
Power Output (Unit Watts Hour)
820 820
Load Speed (RPM)
0-450 / 1300 / 2000 (HD -0-500/1500/2250) 0-450 / 1300 / 2000
Beats per Minute
0-8600 / 25500 / 38250 -
Max Torque (Nm) Hard / Soft
95/66 95/66
Max Drilling Capacity (Wood) (mm)
55 55
Max Drilling Capacity (Metal) (mm)
15 15
Max Drilling Capacity (Masonry) (mm)
13 -
Marketing Weight (kg)
- bare 1.6 1.5
Marketing Weight (kg)
- with pack 2.1 2.0
Marketing Height (mm)
- without pack 208 208
Marketing Length (mm)
213 201
Width (mm)
70 70
LED (Foot/Chin)
Foot
- Switched LED (Low/Med/High -
20 min)
Foot
- Switched LED (Low/Med/High -
20 min)
LED Light Lumens Output
3 / 18 / 77 3 / 18 / 77
IP Rating
IP54 (TBC) IP54 (TBC)
Charge Type
DCB115 DCB115
Sound Pressure dB(A)
97 75
Sound Pressure uncertainty dB(A)
3 3
Sound Power dB(A)
108 86
Sound Power uncertainty dB(A)
3 3
Vibration emmision value
- Drilling into metal (m/s2) <2.5 <2.5
Uncertainty K1 (m/s2) 1.5 1.5
Vibration emmision value
-
Drilling into concrete (m/s2)
-15
Uncertainty K2 (m/s2) -3.9
Vibration emmision value
- Screwdriving (m/s2) <2.5 <2.5
Uncertainty K3 (m/s2) 1.5 1.5
Chuck Type
Jacobs 4713 Jacobs 4713

H
H
Set I Set II Set III
FOCUS LENS
Controlled LED Light
Focal working area reduced shadow
SET I = LOW Light LED
LED with stay on for 20sec –2.6 Lumens
SET II = MEDIUM Light LED
LED with stay on for 20sec –18 Lumens
SET III = HIGH 20min Light LED
LED with stay on for 20min –60 Lumens

H
H
ENGLISH GERMAN ITALIAN FRENCH SPANISH PORTUGUESE DUTCH
CHECK ÜBERPRÜFEN CONTROLLARE CONTROLER COMPROBAR VERIFIQUE CONTROLEREN
ATTENTION ! ACHTUNG ATTENZIONE ATTENTION ! ATENCION ATENÇÃO! ATTENTIE !
SWITCH ON ANSCHALTEN ACCENDERE ALLUMEZ ENCENDER LIGAR AANSCHAKELEN
TURN
CLOCKWISE DREHEN IN UHRZEIGERSINN GIRARE IN SENSO ORARIO
TOURNEZ DANS LE
SENS DES AIGUILLES
D’UNE MONTRE GIRO DERECHA GIRAR NO SENTIDO
HORARIO DRAAI RECHTSOM
MOVE IN
THIS
DIRECTION IN RICHTUNG BEWEGEN
MUOVI IN DIREZIONE
BOUGEZ
DANS CETTE
DIRECTION DIRECION DE LA FLECHA AVANÇAR NESSA DIREÇAO BEWEEG IN DE RICHTING
VAN DE PIJL
CORRECT RICHTIG CORRETTO CORRECT CORRECTO CORRECTO GOED
FUNCTION TEST
FUNKTIONSTEST
DURCHFÜHREN ESEGUIRE IL TEST TEST FONCTIONNEL PRUEVA DE FUNCIONAMIENTO TESTE DE FUNCIONAMENTO FUNCTIETEST
LIFT OVER ANHEBEN SOLLEVARE SOULEVEZ LEVANTAR LEVANTAR SOBRE A OPHEFFEN
DATE CODE HERSTELLUNGS
-
DATUM DATA DI
PRODUZIONE
DATE CODE FECHA FABRICACION CÓDIGO DE
PRODUÇÃO DATUM CODE
2013 33-59

H
H
ENGLISH GERMAN ITALIAN FRENCH SPANISH PORTUGUESE DUTCH
SEQUENCE REIHENFOLGE SEQUENZA SEQUENCE SECUENCIA SEQUÊNCIA VOLGORDE
DISCONNECT TRENNEN SCOLLEGARE DEBRANCHEZ DESCONECTADO DESLIGAR ONTKOPPELEN
SERVICE TOOL SERVICE
WERKZEUG UTENSILE DI
SERVIZIO
OUTILLAGE DE
SERVICE HERRAMIENTAS DE SERVICIO FERRAMENTAS DE SERVIÇO SERVICE GEREEDSCHAP
LUBRICATION BEFETTEN LUBRIFICAZIONE LUBRIFICATION ENGRASE LUBRIFICAÇÃO SMERING
COMPARE VERGLEICHEN COMPARARE COMPAREZ COMPARAR COMPARAR VERGELIJKEN
LISTEN HÖREN ASCOLTARE ECOUTEZ ESCUCHAR OUVIR LUISTEREN
HOW DOES IT
WORK?
WIE
FUNKTIONIERT
DAS? COME FUNZIONA? COMMENT CELA
FONCTIONNE? ¿ COMO FUNCIONA? COMO FUNCIONA? HOE WERKT DIT?
1;2;3;4 …

H
H
ENGLISH GERMAN ITALIAN FRENCH SPANISH PORTUGUESE DUTCH
USE STATIC
PROTECTION
DEVICE
ANTISTATIK MATTE
BENUTZEN
USARE I DISPOSITIVI
ANTISTATICI
UTILISEZ UN
EQUIPEMENT DE
PROTECTION
ANTISTATIQUE
USE PROTECCION
ANTIESTATICA USE PROTEÇÃO
ESTATICA
GEBRUIK ANTI -
STATISCH
MATERIAAL
CLEAN SÄUBERN PULIRE NETTOVER LIMPIAR LIMPAR KUISEN
REMOVE ÊNTFERNE DIMETTERE RETIRER QUITAR REMOVER UITNEMEN
ASSEMBLING
ZUSAMMENBAU
MONTAGGIO MONTAGE EL MONTAJE ENSAMBLAR ASSEMBLAGE

H
H
Before repair and strip down
Carry out a visual check:
Condition of contacts (unit and battery)
mode selector
leakages
condition of chuck
Carry out a functionality check:
percussion mechanism
3 gears / torque power settings
reverse mode
measure the capacity of batteries
check condition of charger (use the charger to charge a obviously good
battery and measure the capacity of the battery

H
H
The electronic control module senses current
into the tool from the battery. When the tool is
in clutch mode (or desired setting), the module
senses a determined current value for a defined
clutch setting and activates the clutch (thus
clutching out and stopping the motor).
Clutch Position Sensor CPS
Clutch Collar
Understand how the E-Clutch works

H
H
As highlighted in slide 9 , it is important to note that the motor will shut down
at a defined current that is measured at the micro processor. In order to
determine at which setting we are at a defined value of voltage is measured.
To give an example :
If we are at torque setting 6, it will detect this position by design, correct
voltage will be measured. The correct specification –1.205v to 1.480v .
Within this range the micro processor will detect X voltage and therefore
cut voltage to the unit.
Understand how the E-Clutch works

H
H
?