DHP 2185059 User manual

DO NOT RETURN TO THE STORE !
Date of Purchase
If parts are missing or damaged, we will gladly ship your
replacement parts free of charge.
Lot Number
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY
INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
1
Metal Futon Frame
Black
Weight Limit: 600 Lb / 272 Kg

Contact Us!
Read Before Beginning Assembly Warranty Information
2
Caution
●Call our toll free number if you need assistance.
●Work in a spacious area and near where the unit will be used, preferably on a
carpet, or use a piece of the cardboard packaging to protect your floor and product.
●Recommended # of people needed for assembly: 2(however it is always better
to have an extra hand). Estimated assembly time is 1.5 hours.
●Make sure all parts are included. Most parts are labeled or stamped on the raw
edge.
●Read each step carefully. It is very important that each step of instruction is
performed in the correct order. If these steps are not followed in sequence,
assembly difficulties will occur.
●This product is designed for home use and not intended for commercial use.
●This product contains small components. Please ensure that they are kept away
from small children.
●Do not use power tools to assemble your furniture. Power tools may strip or
damage the parts.
●You will need a phillips headed screwdriver to assemble this product.
For help with assembly, identifying parts, product information or to order parts,
please contact us:

3

4
Parts
All in 1 big box!
Before you throw the package, please use the
Check Box to identify the parts and ensure that
you have all the parts needed for the assembly.
There are inner box(es) that include components
required to complete this assembly.
A
Arm
X 1
B
D
G
H
OP
LR
E
Q
ST
Arm
X 1
Middle Leg
X 2
Stretcher
X 4
Stretcher Connector
X 2
Mesh Panel
X 2
Mesh Panel
X 2
Mechanism
X 1
Mechanism
X 1
Hook
X 3
Retainer
X 2
Brace
X 4
Frame Connector
X 4
A
GP
H
E
OR
B
S
T
D
Q
L

5
Hardware Pack
Please do not completely tighten all the hardware,
until the entire assembly is complete, unless
otherwise indicated in the step-by-step
instructions.
The screw(s), bolt(s) to be used at each step are
shown in actual size in the lower right corner of
the page.
6
78
45
3
2
1
5/16" x 2 7/16''
X 8
910
11 12
1/4" X 1 5/16''
X 14
1/4" X 1 1/16''
X 4
1/4" X 3/4"
X 2
1/4"
X 18
5/16''
X 4
#8 X 9/16''
X 20
PAD
X 8
4mm
X 2
X 1
3/16" X 3/4"
X 2
3/16"
X 2

6
Step 1
3
5
X 2
X 2
Attach Lto Awith and ;
The top of Mechanism Lmay look
different due to the movable joints.
Please determine the orientation based
on their bottom sides.
A
L
5
5
3
3
Mechanism Lshould be attached on
the inside of Arm A that without nail
heads.
A
Nail heads on Arm Atowards outside.

7
Step 2
Attach Rto Bwith and .
X 2
B
R
X 2
3
5
3
5
The top of Mechanism Rmay look
different due to the movable joints.
Please determine the orientation based
on their bottom sides.
B
Mechanism Rshould be attached on the
inside of Arm B that without nail heads.
Nail heads on Arm Btowards outside.

8
Step 3
G
G
G
G
H
H
7
X 8
Insert Hinto Gx 2 with .
Repeat the same actions to join another Rail.

9
Step 4
H
D
D
Attach DX 2 to HX 2 with .
4
X 2

10
Step 5
Attach sub-assembly G/H x 2 from previous
step to Aand Bwith and .
Attach to Gand Hin the locations
shown.
X 8
X 4
X 8
1
6
8
A
G
D
H
G
GD
H
G
B
1
1
6
6
6
8
8

11
Step 6
6.1 Join panel O& Pwith EX 2 and .
6.2 Attach Qto O & P with and .
X 4
2
X 4
X 4
5
7
2
2
5
5
7
O
E
P
Q
P
Q
P
O
P
Q
Q
O
P
Q
Q
6.1 6.2
SEAT FRAME!

12
Step 7
7.1 Join panel O& Pwith EX 2 and .
7.2 Attach one end of Qto O & P with 
and .
7.3 Attach the other end of Qto O & P with
⓫and ⓬.
X 2
Q
2
Q
O
P
O
P
Q
Q
O
E
P
PQ
Q
P
5711
12
X 2 X 4 X 2 X 2
2
5
12
11
7.1
BACK FRAME!
7.2 7.3
7

13
Step 8
Attach O to Lthen Pto R with and .
X 4
2
L
R
O
P
P
R22
5
5
X 4
SEAT FRAME!

14
Step 9
Lift the Seat Frame to the Position as shown.
A
B
O
P

15
Step 10
Attach Oto R then P to L with and .
X 4
O2
X 4
P
O
P
B
P
R
2
2
5
R
L
5
BACK FRAME!
O

16
Step 11
Hook Owith Pusing T X 3.
T
O
P
P
O
TT

17
Step 12
7
S
O
P
S
O
O
7
7
X 4
Attach SX 2 to O& Pon the seat frame,
with as illustrated.

18
Step 13
You can switch the status of your futon as
shown.

19
Helpful Hints
●Move your new furniture carefully, with two
people lifting and carrying the unit to its new
location.
●Your DHP furniture can be disassembled and
reassembled to move.
●Some parts have been pre-assembled for this
item. They are illustrated on this page and available
for replacement.
●Do not use risers under this bed.
Helpful Hints
Weight Limit: 600 Lb / 272 Kg
T613050
X 4
T613070
X 2
To avoid tipping, do not sit,
lie or stand on the edge of
the unit when the futon is in
sleeping position.
Keep hands clear from
Mechanisms installed on the
Arms.

NO LO REGRESE A LA TIENDA !
Fecha de compra
Metal Futon Frame
Número de lote ESTE INSTRUCTIVO CONTIENE INFORMACION IMPORTANTE DE
SEGURIDAD. POR FAVOR LEA Y GUARDE PARA SU REFERENCIA FUTURA.
ES
Registra tu producto y participa para ganar!
Garantía
Contáctenos!
Si le faltan piezas o las que se incluyen están dañadas, con
mucho gusto le enviaremos sus piezas de reemplazo sin
cargo extra.
Al registrar tu producto con nosotros participarás automáticamente en nuestro
concurso trimestral con la oportunidad de ganar increíbles premios.
Beneficios:
Cer:
●Información exclusiva sobre nuevos productos
●Ofertas y promociones
●Consejos útiles sobre cómo utilizar al máximo tu producto
Registra tu producto y descubre cual es el premio para este trimestre!
Como registrarse: