Diamond RECH/1G-N Operation manual

Mod: RECH/2G-N
Production code: GAR 10
05/2014

Exclusion clauses of the guarantee
Bad installation and bad maintenance, in particular if they do not respect cur-
rent regulations or instructions appearing in this user guide.
Cannot benefit from the guarantee the repairs required as a result of false opera-
tions, of inappropriate use, of carelessness or of excess loads of the device, as well
as those resulting from defective installations.
The damage due to shocks, bad weather is not flatware by the guarantee. The mate-
rial travels at the risks of the user; in case of delivery by carrier, the consignee has to
have reservations towards the carrier before any delivery of the device.
The guarantee comes to an end in case of intervention, of repair, of modification by
no qualified persons, or of use in inappropriate purposes.
INSTR CTIONS FOR SE AND INSTALLATION
GAS STOVES
RECH/1G-N & RECH/1G-N
Made in France
Made in FranceMade in France
Made in France
ay 2014

GAS STOVES
RECH/1G-N & RECH/2G-N
Congratulations for the acquisition of this upmarket appliance made in France. You
chose an appliance which alloys the best technical qualities with a big user-
friendliness. We wish you the biggest contentment
1. SEC RITY INSTR CTIONS
Please respect these instructions scrupulously to avoid any risk of fire, scald or other
wounds and damage. During the use of this appliance, fundamental circumspection of
security must always be noticed, such as:
- Take into account the instructions to be systematically kept with the appliance.
- Install the appliance always in instructions respect. A 10 cm distance minimum
with the partition or the wall is necessary.
- Protect the appliance from direct light of the sun, frost and humidity.
- Never leave the appliance within the reach of children or disabled persons without
surveillance.
- Never move the appliance when it is working or when the surfaces of cooking are
still hot.
- Do not touch the hot surfaces of the appliance. The temperature of the hot surfac-
es can be very important when the appliance is working. Always use handles and
control knobs.
- Do not use the appliance for other functions than determined use.
- Do not leave the pipe or hose (purchased separately from a specialised shop) in
the contact of hot surfaces.
- Do not bend the pipe or hose.
- The appliance should not be used close to combustible materials.
- During use, look after not to obstruct hearings of aeration of the appliance
- Entrust compensations only to a skilled person.
- Use only spare parts of origin.
- At the end of cooking, before cleaning the appliance, do not forget to disconnect
the gas inlet.
2. CONTENTS OF CARDBOARD PACKAGING
Device: a gas stove
Accessories: - A set of natural gas injectors (burner + pilot light)
- The present note
7
6. CLEANING AND MAINTENANCE
Close the gas supply.
- Let cool completely the device before any technical intervention or cleaning.
- For cleaning, only use non-abrasive products, clean regularly the external walls of
your device with warm water and wash liquid: avoid the abrasive towelling. Rinse your
device with a wet sponge.
- Never clean the device under a water jet, the infiltrations would risk to damage it in a
irreparable way.
- During a prolonged non-use, we recommend you strongly to keep the device shield-
ed from the humidity .
7. TECHNICAL SPECIFICATIONS
8. G ARANTEE
Conditions of guarantee
The guarantee applicable to any device is the commercial guarantee of the distributor
or the retailer. Please contact the store where you bought your device to know the
precise conditions.
The guarantee grants no right for damages.
The dispositions which follow are not exclusive of the profit of the legal guarantee
planned by articles 1641 and following ones of the Civil code relative to the defects
and the latent defects.
Models Outside dimen-
sions
Power Nb of burners Weight
RECH/1G-N370x430x190 mm 5 kW 1 fire 5 kW 10 Kg
RECH/2G-N760x430x190 mm 10 kW 2 fires 10 KW 20 Kg

6
c) se of appliance :
Elements of command and display
Precautions of use
Switching-on
1. Press the power control knob (n°1 on picture) for a few seconds in front of star
position.
2. Use a gas lighter or a long matchstick by holding it near the pilot light (n°2 on
picture)
3. Keep the control knob (n°1 on picture) pressed for 15 seconds.
4. The burner then remains lit and it is now possible to increase the power by turn-
ing the power control knob (n°1 on picture).
Temperature setting
Once the burner is lit, set the appliance to the desired power by turning the control
knob (n°1 on picture).
It is not necessary to leave the device switched on at full power. It is necessary
to adapt the temperature to products to be cooked to limit the gas consumption.
Stopping the appliance
Set each control knob (n°1 on picture) to 0: the appliance is completely switched-
off.
Close the butane or propane cartridge.
Let the appliance cool down.
Clean the appliance. (See 6. Cleaning)
d) Breakdown / repair:
In case of breakdown or of damaged part, please call your after-sales service and
confide any technical operation to qualified person.
When you contact the after-sales service of your distributor or your store, give him the
complete reference of your device (commercial name, type and serial number). This
information appears on the visible descriptive plate behind the device.
Command/Display Function
Power ontrol knob
(n°1 on pi ture)
On/off
Set the power (low flame = low power, high flame = high pow-
er)
Burner 5kw
Diameter for pans
to use
Maxi Mini
34 m 22 m
3
See exploded views for RECH/1G-N & RECH/2G-N at the end of the document.
3. CONFORMITY OF SE
Use the device only to cook or keep warm some food.
4. WAY OF F NCTIONING
These gas stoves are compact, in all stainless steel, with 1, 2 or 3 burners according
to models.
The control of each cooking areas is independent, with a system of pilot light when
starting and safety thermocouple. They are fitted with several removable parts: cast
iron grid, stainless steel container and burner ring.
To turn on the device, just approach a long matchstick or gas lighter near the pilot
light (n°2 on picture), press and turn the control knob (n°1 on picture) in front of star
position. Keep the control knob (n°1 on picture) pressed for 15 seconds. The burner
then remains lit.
While cooking, the temperature can be regulated using the control knob (n°1 on pic-
ture) from high flame to low flame in order to avoid over-cooking.
A safety thermocouple cuts the gas supply if the burner is extinguished. The low
flame of the appliance is pre-adjusted in the factory, it must not be changed.
Power control knob + on/off Complete burner
1
1

5. F NCTIONING / HANDLING
a) Installation/Assembly:
- Unpack carefully the machine from its packaging.
- Place the device on a plane and heatproof surface in a well ventilated place.
- Never place the device near a wall or near a partition makes of combustible materials
even if it is very well isolated.
- A distance of minimum 10 cm with the partition or the wall is necessary.
- Remove the protective film from the machine.
b) First starting:
During the first use, warm your machine up outside during about 30 min to evacuate
residual smokes of manufacturing oil from the metallic parts. This may emit a slight
smell for a few moments.
First cleaning
Clean the device before the first use. (See 6 Cleaning)
Gas connection
The appliances run on the following gases: Butane G30, Propane G31, Natural gas
G20/G25. The appliances are originally delivered with a Butane/Propane injector corre-
sponding to the category II2E+3+. The connection is made thanks to a thread 1/2.
The heat release rate of the appliance is RECH/1G-N 5 kW
RECH/2G-N 10 kW
For a use in natural gas, change the injectors. They are delivered in a small plastic bag
in the package. Screw the venture screw 19 mm.
Connect the appliance to the gas supply pipe, interposing a stop valve which enables
the appliance to be insulated from the rest of the installation.
Check the supply pressure using a manometer when all the burners are lit. It must be
equal to the indications on the rating plate.
The fresh air flow required for combustion air supply is:
- RECH/1G-N 10 m3/h
- RECH/2G-N 20 m3/h
45
General conditions of installation
The installation and maintenance of the appliance must be carried out in compliance
with the statutory texts and good practices in force, mainly:
General specifications
For all appliances:
Article GZ Installation with combustible gases and liquefied hydrocarbons.
Then, according to use:
Article CH Heating, ventilation, refrigeration
Air conditioning and domestic hot water steam generation.
Article GC Installation of appliances to be used for catering
Specific provisions for each type of establishment to which the public is admitted
(hospitals, shops, etc)
Important: Never change the diameter of the injectors.
Gas category table, according to the country of destination of the appliance.
Country of destina-
tion
Category Gas Pressures Diameter of
injector
Burner 5
KW
FR/BE II2E+3+ G20/G25
G30/G31
20/25
28-30/37
160
110
LU/DE I2E G20 20 160
AT/CH/CY/DK/EE/
FI/HR/LT/LV/RO/
SE/SI/SK/TR
II2H3B/P G20
G30/G31
20
30
160
110
PL II2E3P G20
G31
20
37
160
110
HR/HO II2H3P G20
G31
20
37
160
110
CH/CY/CZ/ES/GB/
GR/IE/IT/PT/SI/SK/
TR
II2H3+ G20
G30/G31
20
28-30/37
160
110
NL/NO/HU I3B/P G30/G31 30 110
Air regulation
Injectors were conceived to avoid any air adjustments and that whatever
the gas you use.